The International Association for the Engineering Modelling, Analysis and Simulation Community
Principal Sponsor
Plenary presentations by:
DNV GL (NOR), ÅF (SWE), Novo Nordisk (DEN),
Continental (GER), FS Dynamics (SWE), Volvo Car (SWE),
Zodiac Aerospace (NED)
30 technical presentations in 11 sessions
Short training and discussion session
Hardware and software exhibition
Networking, experience and information exchange
For NAFEMS members (free: 4 seminar credits*) and non-members
www.nafems.org/nordic2016
3
rdNAFEMS NORDIC Regional Conference:
neutral – interdisciplinary – independent
Engineering Simulation: Best Practices,
New Developments, Future Trends
10 - 11 May 2016, Göteborg, Sweden
Invitation and conference agenda
* Free attendance for NAFEMS members towards four NAFEMS seminar credits.
The NAFEMS NORDIC Regional Conference 2016 will be held at the Radisson Blu Scandinavia Hotel in Göteborg on 10 - 11 May 2016.
Entitled “Engineering Simulation: Best Practices, New Developments, Future Trends”, the conference will give delegates an unrivalled independent insight into best practices and state-of-the-art which consequently show upcoming trends, tendencies and necessary future needs in FEA, CFD, MBS and associated technologies. The conference will increase awareness and provide a discussion forum for topics that are vital to engineering industrialists and academics, offering attendees an unrivalled combination of industrial knowledge, expertise and forward-thinking to aid their deployment of CAE over the next few years.
The conference is open to both, members and non-members of NAFEMS, with non-members able to attend the event for free, as part of their membership benefits package.
We are looking forward to welcome you in Göteborg, Sweden.
NAFEMS NORDIC Steering Committee
Radisson Blu Scandinavia Hotel
Conference Sponsors
Principal
Silver
Invitation
NAFEMS NORDIC Steering Committee members M. Hermodsson (ÅF, S)
H. Ekman (Altair Engineering, S) J. Granlund (Dassault Systemes, S) L. Pilgaard Mikkelsen (DTU, DK) M. Redhe (DYNAmore Nordic, S) E. Weibust (Engicon, N)
J. Landergren (MSC.Software Sweden, S) G. Horrigmoe (Sweco Norge, N)
T. Hansen (Novo Nordisk, DK) A. Torvund (SimEvolution, N)
Exhibitors BETA CAE Systems Ceetron
CEI
Dassault Simulia DYNAmore Nordic FS Dynamics
Jotne EPM Technology Nafems
...
Venue and hotel accommodation Radisson Blu Scandinavia Hotel Södra Hamngatan 59
401 24 Göteborg, Sweden Tel.: +46 31 758 5000 Fax: +46 31 758 5001
www.radissonblu.se/hotell-goteborg
NAFEMS NORDIC conference registrants can reserve a discounted room at the hotel. The group code is: „NAFEMS“.
Conference registration
Please register by completing the attached registration form or online at www.nafems.org/nordic2016 Conference language
English
Delegate fee (per person)
- Not-NAFEMS members: 5.900 SEK - Presenter from industry 1): free
- NAFEMS members
using 4 seminar credits: free 2)
- NAFEMS member with no
seminar credits: 4.000 SEK All costs plus VAT.
These fees include attendance at the conference, one copy of the proceedings, lunch for all two days, break refreshments each day, and beverages and snacks in the evening of the first day. Hotel accommodation is not included.
1) Companies for the production/processing of material
goods / goods in factories/plants.
2) NAFEMS membership fee for companies/institutes
A standard NAFEMS site membership costs 1.095 Euro per year. An academic site membership costs 675 Euro per Jahr. Beneath many others, NAFEMS members will get six seminar credits (1 credit = 1/2 seminar/conference day) per year.
NAFEMS members can use seminar credits towards free attendance at this event. This event will charge four seminar credits per delegate. You can register 1,5 delegates included in your membership to this confe-rence! Please consider becoming NAFEMS member before registering!
Cancellation policy
Cancellation up to 3 weeks before the event date: free of charge;
Cancellation up to 1 week before the event date: 75% of registration fee non-refundable; Cancellation up to 1 week before the event date:
all seminar credits non-refundable; No show at the event:
100% of registration fee non-refundable
Hardware and software exhibition / sponsoring We would like to extend an invitation to your company to be part of the conference as exhibitor and/or sponsor. Please request further information or download the exhibition and sponsorhip opportunity brochure (pdf) at www.nafems.org/nordic2016. Conference organization
NAFEMS Deutschland, Österreich, Schweiz GmbH Osterham 23 D-83233 Bernau, Germany Tel.: +49 80 51 - 96 59 3 49 Fax: +49 80 51 - 96 74 3 37 e-mail: [email protected] www.nafems.org About NAFEMS
NAFEMS is the International Association of the Engineering Modelling, Analysis and Simulation Community. Our principal aims are to:
• Improve the professional status of all persons engaged in the use of engineering simulation • Establish best practice in engineering simulation • Provide a focal point for the dissemination and
exchange of information and knowledge relating to engineering simulation
• Promote collaboration and communication • Act as an advocate for the deployment of
simulation
• Continuously improve the education and training in the use of simulation techniques
• Be recognised as a valued independent authority that operates with neutrality and integrity
We focus on the practical application of numerical engineering simulation techniques such the Finite Element Method for Structural Analysis, Computational Fluid Dynamics, and Multibody Simulation. In addition to end users from all industry sectors, our stakeholders include technology providers, researchers and academics. Please find more information at www. nafems.org.
Conference website:
www.nafems.org/nordic2016
Room 1
Session 1 – Plenary Presentations Welcome and NAFEMS Introduction
T. Morris, A. R. Oswald (NAFEMS)
Documentation of Structural Integrity for Marine Structures by Means of Non-linear FEM
G. Solland (DNV GL, NOR)
Stochastic Finite Element Simulations of Real Life Frontal Crashes: With Emphasis on Chest Injury Mechanisms in Near-side Oblique Loading Conditions
J. Iraeus (ÅF, SWE)
Prediction of Glass Cartridge Robustness
T. Hansen (Novo Nordisk, DEN) Lunch Break
Session 2 – Plenary Presentations
How Small (but fine) Simulations can also Radically Improve Industrial Products
Z. Penzar (Continental, GER)
What About Quality?
O. Widlund (SP Technical Research Institut, SWE); M. Stallgard (FS Dynamics, SWE); J. Ask (Volvo Car Corporation, SWE)
Simulation for Certification of Aircraft Interior Monuments
V. Pilaka (Zodiac Aerospace, NED)
Principal Sponsor Presentation: The Next Step in the Evolution of Simulation
P. Segaert (Siemens PLM) Coffee Break
Room 1
Session 3 - Applications
Application of Finite Element Analysis (FEA) for Subsea Engineering in Technip Norge
Z. Gu (Technip Norge, NOR)
Profile Selection of the Rear Underrun Protection Device (RUPD) with FEM Analyses and Topics
B. Yigit, S. Sagsöz (Anadolu Isuzu Automotive, TUR); K. Yay (Istanbul Technical University, TUR)
A Non-Linear Global-Local Analysis Using Super Elements
J. Wind, L. Bräuner (Aarhus University, DEN)
On Dish Concentrator Engineering Analyses
R. Sjöqvist (Cleanergy, SWE)
Room 2
Session 4 – CFD
FSI-Analysis on Vibrations of a Slender Rod Exposed to Axial Flow Calculations for Nuclear Power Applications
K. Bengtsson (Onsala Ingenjörsbyra, SWE)
Computational Fluid Dynamics Simulations of Ships in High Waves
D. Frisk, F. Carlsson, O. Dahlin (FS Dynamics, SWE)
Simultaneously Optimizing Vehicle Cooling Performance while Reducing Aerodynamic Drag
Y. Dewan, M. Elmore, F. Ross (CD-adapco, USA); R. Averill (Red Cedar Technology, USA)
Investigation on the Injector Internal Flow and the Coupling Spray Characteristics during the Whole Transient Injection Process
C. Gong, R. Baar (Technical University Berlin, GER)
Exhibition Get together
in the hardware and software exhibition
Agenda – Tuesday, 10 May
10:30 10:40 11:15 11:50 12:25 13:35 14:10 14:35 15:00 15:20 16:10 16:35 17:00 17:25 17:50
Room 1
Session 5 - Processes
Towards an Optimization Driven Concept Development Process in an Automotive Context
A. Govik (Volvo Car, SWE)
Simulation Driven Design – Structural Optimization as Design Driver
L. Fredriksson (Altair Engneering, SWE)
Facilitating Design Innovation: Automation of Marine Crankshaft Design and Classification Approval
S. Ribeiro-Ayeh (Dassault Systemes Deutschland, GER); A. Winkler (Dassault Systemes, SWE) Coffee Break
Session 7 – Materials
Progressive Collapse Modelling of Composites
K. Edvardsen (cDynamics, NOR)
A Study on FEA Modeling of Carbon/PEEK Lamina-ted Composites and Corresponding Material Models
L. Coniglio (Parker Hannifin Manufacturing, BEL)
Composite Material Multi Objective Optimization of a Formula One Front Wing
S. Seitanis, D. Drougkas, G. Korbetis (BETA CAE Systems, GRE)
Lunch Break
Session 9 - Materials / Methods
Post-Processing Fluid and Particle Data, Perspectives from The Hot Mix Asphalt Industry
A. Hobbs (Astec, GBR)
FEM/DEM Visualization and Simulation Data Management (SDM)
O. Barrowclough, H. Dahl, F. Fuchs, J. Hjelmervik, J. Nygaard (Sintef ICT, NOR); K. Bengtsson, J. Haenisch (Jotne EPM Technology, NOR)
The Effect of Height Restoration and Kyphoplasty Parameters on the Load Transfer Through the Lumbar Spine
A. Tsouknidas, S. Chatzimoisiadis, E. Karatsis, N. Michailidis (AUTH Department of Mechanical engineering, BETA CAE Systems, GRE)
Coffee Break
Room 1
Session 11 - Misc
Water Tightness of Polyethylene Flange Joints - Finite Element Analysis and Full Scale Experiments
J. Sandström, J. Sällström, S. Sällberg (SP Technical Research Institute, SWE)
FEM AO, An Ultra-Efficient Solver for Large-Scale Vibro-Acoustic System Simulation Through High-Order Adaptive Finite Elements
P. Segaert, H. Beriot (Siemens PLM, BEL)
NAFEMS EC Projects – Status and Applications
G. Duffett (NAFEMS)
Farewell
Room 2
Session 6 – Materials / Project
Atomic-Scale Computational Materials Engineering
M. Christensen, X. Rozanska, A. Mavromaras, C. Freeman, E. Wimmer, P. Saxe, A. France-Lanord (Materials Design/Université Paris-Saclay, FRA/USA)
Simulation of the Laser Transmission Welding of Thermoplastics - Sensitivity to Process Parameters
A. Majumdar, L. D´Alvise (Geonx, BEL)
The SimBest Project – Simulation Best Practice and State of the Art
G. Duffett (NAFEMS)
Session 8 – Showcase Course: Nonlinear FEM Showcase Course: Nonlinear FEM
Tutor: G. Duffett (NAFEMS)
Session 10 – The SimBest Project Discussion Session:
The SimBest Project – do the outcomes reflect the whole simulation world?
Moderated by G. Duffett (NAFEMS)
Agenda – Wednesday, 11 May
08:35 09:00 09:25 09:50 10:35 11:00 11:25 11:50 12:50 13:15 13:40 14:05 14:30 14:55 15:20
Registration
Sender
Company / University: ____________________________________________________________________________ VAT-number: ____________________________________________________________________________________ Internal PO number (if needs to be mentioned on invoice): _____________________________________________ Department: _____________________________________________________________________________________ First name: _____________________________________________________________________________________ Last name: _____________________________________________________________________________________ Street: _____________________________________________________________________________________ ZIP-code, city: ___________________________________________________________________________________ Country: _____________________________________________________________________________________ Phone: _____________________________________________________________________________________ Fax: _____________________________________________________________________________________ E-Mail: _____________________________________________________________________________________ Invoice address (if different):
_____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ Date: _____________________________________________________________________________________ Signature: _____________________________________________________________________________________
Online registration at www.nafems.org/nordic2016 Please complete and fax to +49 - 80 51 – 96 74 3 37, e-mail to [email protected] or send to NAFEMS GmbH, Osterham 23, D-83233 Bernau am Chiemsee, Germany.
I herewith register for the NAFEMS NORDIC Regional Conference, 10 - 11 May 2016 in Göteborg, Sweden: My company is not NAFEMS member: 5.900 SEK plus VAT
My company is NAFEMS member – free attendance using 4 seminar credits
My company is NAFEMS member – no more seminar credits available: 4.000 SEK plus VAT Please send me the exhibition and sponsoring opportunities brochure.
I am interested in NAFEMS membership. Please contact me.
Declaration of consent to the use of personal data:
The NAFEMS Deutschland, Österreich, Schweiz GmbH collects and process your address data for the organization of the event, for own promotional purposes and allows prestigious companies and institutions (sponsors) to send you information. You may, at any time, revoke your consent by contacting us via phone (+49 80 51 – 96 59 3 49) or in writing to NAFEMS Germany, Austria, Switzerland GmbH, Osterham 23, D-83233 Bernau am Chiemsee, Germany, Fax +49 (0) 80 51 - 96 74 3 37.