SUPPORTED STANDARDS BY 01.09.2013
Overview... 2
Concrete ... 3
Cement ... 5
Asphalt ... 6
Bitumen ... 8
Aggregates ... 9
Soil / Geotechnical ... 12
Geotextile ... 12
Drilling Cores ... 13
Sealing Products/Systems ... 13
Overview
LASTRADA is the standard laboratory software for the quality management of construction materials. Many
thousand users work in more than 200 companies and worldwide in 19 countries with LASTRADA. These
include producers and contractors as well as independent test houses and public authorities. LASTRADA
integrates construction materials testing, quality management, mix design and all laboratory workflows in one
system (LIMS).
LASTRADA offers testing modules for concrete, concrete products, cement, asphalt, aggregates,
soil/geotechnical, geotextiles, drilling cores, and sealing products. The variety of supported standards and
included functionality is unique.
The development of LASTRADA pursues the philosophy, that the entry of raw test data follows the actual
laboratory workflow. This means that the dialogues are tailored to each context. All required calculations are
carried out by LASTRADA. For each method, final results can also be registered alternatively.
LASTRADA supports a growing number of construction materials and geotechnical standards. Within the
maintenance of LASTRADA we continuously add new standards.
Concrete
Concrete Product and FPC Standards
EN 206-1 Concrete - Part 1: Specification, Performance, Production and Conformity
EN 1008 Mixing Water for Concrete, Part: Waste water
DIN 1045-2 Concrete Structures, Reinforced Concrete and Prestressed Concrete, Part 2: Concrete - Specification, Production and Conformity
SN EN 206-1 Concrete - Part 1: Specification, Performance, Production and Conformity (Table NA.3-4)
SN EN 206-9 Concrete - Part 9: Additional Rules for Self-compacting Concrete (SCC)
NEN 8005 Nederlandse Aanvulling op NEN-EN 206-1: Beton – Deel 1: Specificatie, Eigenschappen, Vervaardiging en Conformiteit (Tabel E)
DIN 1045-1 Limits for Composition and Properties of Concrete (Tables F2.1-2)
DIN 1045-3 Concrete, reinforced and prestressed concrete structures, Part 3: Execution of structures
DAfStb German alkali standard
German standard for steel fibre concrete
ZTV ING Additional technical conditions for engineering structures ZTV K 96 Additional technical conditions for engineering structures
Fresh Concrete Test Standards
EN 12350-2 Testing fresh concrete - Part 2: Slump test EN 12350-3 Testing fresh concrete - Part 3: Vebe test
EN 12350-4 Testing fresh concrete - Part 4: Degree of compactability EN 12350-5 Testing fresh concrete - Part 5: Flow table test
EN 12350-6 Testing fresh concrete - Part 6: Density EN 12350-7 Testing fresh concrete - Part 7: Air content
EN 12350-8 Testing fresh concrete - Part 8: Self-compacting concrete - Slump-flow test EN 12350-9 Testing fresh concrete - Part 9: Self-compacting concrete – V-funnel test
EN 12350-11 Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test
Hardened Concrete Test Standards
EN 12390 Compressive Strength
Water permeability Flexural strength Tensile splitting strength E-Module
ASTM C 39 Compressive Strength of Cylindrical Concrete Specimens
ASTM C 78 Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) ASTM C 642 Water absorption and volume of permeable voids including sample preparation
ASTM C 948 Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete
ASTM C 1202 Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration
BS 1881-120 Compressive strength, density and visual examination and preparation, of drilled concrete cores
BS 1881-124 Determination of Chloride Content Determination of Sulphate Content
BS 1881-208 Recommendations for the Determination of the Initial Surface Absorption of Concrete Initial surface absorption test (ISAT)
DIN 1048 Water permeability
SIA 162/1 Freeze/thaw cycle performance
SIA 262/1-A Hydraulic conductivity/porosity
SIA 262/1-B Chloride resistance
SIA 262/1-C Freeze/De-icing Salt Resistance
SIA 262/1-D Sulphate resistance
SIA 262/1-F Shrinkage
SIA 262/1-F Swell
SIA MB 2042 Alkali-aggregate reaction (AAR)
BAW Alkali-silica-reaction
BAW Chloride migration
BAW Freeze/De-icing Salt Resistance
BAW Freeze-Thaw Resistance
BAW Heat of hydration
BAW Carbonatisation
BAW Mercury intrusion porosimetry
BAW Shrinkage/Swell
BAW Water absorption
NT BUILD 492 Chloride Migration
Test Standard for Concrete Structures
EN 12504-2 Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number
Standards for Concrete Products
EN 1338 Concrete paving blocks - Requirements and test methods
EN 1339 Concrete paving flags - Requirements and test methods
EN 1340 Concrete kerb units - Requirements and test methods
Cement
Cement Product Standards
EN 197-1 Cement – Part 1: Composition, specifications and conformity criteria for common cements
EN 197-2 Cement – Part 2: Conformity evaluation
Cement Test Standards
EN 196-1 Methods of testing cement – Part 1: Determination of strength
EN 196-2 Methods of testing cement – Part 2: Chemical analysis of cement; Ch. 7 Loss on Ignition EN 196-2 Methods of testing cement – Part 2: Chemical analysis of cement; Ch. 8 Determination of Sulfate
EN 196-2 Methods of testing cement – Part 2: Chemical analysis of cement; Ch. 9 Determination of residue insoluble EN 196-2 Methods of testing cement – Part 2: Chemical analysis of cement; Ch. 13 Main Constituents
EN 196-2 Methods of testing cement – Part 2: Chemical analysis of cement; Ch. 14 Chloride EN 196-2 Methods of testing cement – Part 2: Chemical analysis of cement; Ch. 17 Alkali reactivity EN 196-3 Methods of testing cement – Part 3: Determination of setting time and soundness EN 196-6 Methods of testing cement – Part 6: Determination of fineness
ASTM C150 Tricalcium Aluminate
ASTM C150 Tetracalcium Aluminoferrite
ASTM C150 Dicalcium Silicate
ASTM C150 Tricalcium Silicate
Asphalt
Asphalt Product Standards
Product standards are not hard-coded in LASTRADA, but may be edited as master data. This means that material specifications of every national, regional or company-specific standard can be registered and used as basis for evaluations.
EN 13108-1 Bituminous mixtures - Material specifications, Part 1: Asphalt Concrete
EN 13108-2 Bituminous mixtures - Material specifications, Part 2: Asphalt Concrete for very thin layers EN 13108-3 Bituminous mixtures - Material specifications, Part 3: Soft Asphalt
EN 13108-4 Bituminous mixtures - Material specifications, Part 4: Hot Rolled Asphalt EN 13108-5 Bituminous mixtures - Material specifications, Part 5: Stone Mastic Asphalt EN 13108-6 Bituminous mixtures - Material specifications, Part 6: Mastic Asphalt EN 13108-7 Bituminous mixtures - Material specifications, Part 7: Porous Asphalt EN 13108-8 Bituminous mixtures - Material specifications, Part 8: Reclaimed Asphalt TL Asphalt-StB 07 Technical delivery conditions for asphalt for use in road construction
TL AG-StB 09 Technical delivery conditions for reclaimed asphalt for use in road construction ZTV Asphalt-StB 07 Additional technical conditions for road construction with asphalt
FGSV - M TA Bulletin for warm mix asphalt (German society for road construction research)
Asphalt FPC Standards
EN 13108-20 Bituminous mixtures - Material specifications - Part 20: Type testing
EN 13108-21 Bituminous mixtures - Material specifications - Part 21: Factory production control FGSV - M WA Bulletin for reclaimed asphalt (German society for road construction research)
Asphalt Test Standards
EN 12697-1 Bituminous mixtures - Test methods for hot mix asphalt - Part 1: Soluble binder content
EN 12697-2 Bituminous mixtures - Test methods for hot mix asphalt - Part 2: Determination of particle size distribution EN 12697-3 Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator EN 12697-4 Bituminous mixtures - Test methods for hot mix asphalt - Part 4: Bitumen recovery: Fractionating column EN 12697-5 Bituminous mixtures - Test methods for hot mix asphalt - Part 5: Determination of the maximum density EN 12697-6 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous
specimens
EN 12697-8 Bituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of void characteristics of bituminous specimens
EN 12697-10 Bituminous mixtures - Test methods for hot mix asphalt - Part 10: Compactability
EN 12697-11 Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate and bitumen
EN 12697-12 Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens
EN 12697-13 Bituminous mixtures - Test methods for hot mix asphalt - Part 13: Temperature measurement EN 12697-14 Bituminous mixtures - Test methods for hot mix asphalt - Part 14: Water content
EN 12697-16 Bituminous mixtures - Test methods for hot mix asphalt - Part 16: Abrasion by studded tyres
EN 12697-17 Bituminous mixtures - Test methods for hot mix asphalt - Part 17: Particle loss of porous asphalt specimen EN 12697-18 Bituminous mixtures - Test methods for hot mix asphalt - Part 18: Binder drainage
EN 12697-19 Bituminous mixtures - Test methods for hot mix asphalt - Part 19: Permeability of specimen
EN 12697-21 Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using plate specimens EN 12697-22 Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel tracking
EN 12697-23 Bituminous mixtures - Test methods for hot mix asphalt - Part 23: Determination of the indirect tensile strength of bituminous specimens
EN 12697-25 Bituminous mixtures - Test methods for hot mix asphalt - Part 25: Cyclic compression test EN 12697-27 Bituminous mixtures - Test methods for hot mix asphalt - Part 27: Sampling
EN 12697-28 Bituminous mixtures - Test methods for hot mix asphalt - Part 28: Preparation of samples for determining binder content, water content and grading
EN 12697-29 Bituminous mixtures - Test method for hot mix asphalt - Part 29: Determination of the dimensions of a bituminous specimen
EN 12697-30 Bituminous mixtures - Test methods for hot mix asphalt - Part 30: Specimen preparation by impact compactor EN 12697-33 Bituminous mixtures - Test methods for hot mix asphalt - Part 33: Specimen prepared by roller compactor EN 12697-34 Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test
EN 12697-35 Bituminous mixtures - Test methods for hot mix asphalt - Part 35: Laboratory mixing
EN 12697-36 Bituminous mixtures - Test methods for hot mix asphalt - Part 36: Determination of the thickness of a bituminous pavement
EN 12697-39 Bituminous mixtures - Test methods for hot mix asphalt - Part 39: Binder content by ignition
EN 12697-45 Bituminous mixtures - Test methods for hot mix asphalt - Part 45: Binder drainage, Schellenberg method ASTM D 2726 Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
TPAsphalt- Part1 Technical testing standard of asphalt for use in road construction - Part 1: Binder content TPAsphalt- Part2 Technical testing standard of asphalt for use in road construction - Part 2: Particle size distribution TPAsphalt- Part3 Technical testing standard of asphalt for use in road construction - Part 3: Bitumen recovery TPAsphalt- Part5 Technical testing standard of asphalt for use in road construction - Part 5: Maximum density TPAsphalt- Part6 Technical testing standard of asphalt for use in road construction - Part 6: Bulk density TPAsphalt- Part8 Technical testing standard of asphalt for use in road construction - Part 8: Void characteristics
TPAsphalt- Part11 Technical testing standard of asphalt for use in road construction - Part 11: Affinity between aggregate and bitumen TPAsphalt- Part12 Technical testing standard of asphalt for use in road construction - Part 12: Water sensitivity
TPAsphalt- Part13 Technical testing standard of asphalt for use in road construction - Part 13: Temperature measurement TPAsphalt- Part14 Technical testing standard of asphalt for use in road construction - Part 14: Water content
TPAsphalt- Part17 Technical testing standard of asphalt for use in road construction - Part 17: Particle loss TPAsphalt- Part18 Technical testing standard of asphalt for use in road construction - Part 18: Binder drainage TPAsphalt- Part20 Technical testing standard of asphalt for use in road construction - Part 20: Indentation TPAsphalt- Part22 Technical testing standard of asphalt for use in road construction - Part 22: Wheel tracking TPAsphalt- Part23 Technical testing standard of asphalt for use in road construction - Part 23: Indirect tensile strength TPAsphalt- Part27 Technical testing standard of asphalt for use in road construction - Part 27: Sampling
TPAsphalt- Part28 Technical testing standard of asphalt for use in road construction - Part 28: Preparation of samples TPAsphalt- Part29 Technical testing standard of asphalt for use in road construction - Part 29: Dimensions
TPAsphalt- Part30 Technical testing standard of asphalt for use in road construction - Part 30: Specimen preparation
TPAsphalt- Part33 Technical testing standard of asphalt for use in road construction - Part 33: Specimen prepared by roller compactor TPAsphalt- Part34 Technical testing standard of asphalt for use in road construction - Part 34: Marshall test
TPAsphalt- Part35 Technical testing standard of asphalt for use in road construction - Part 35: Laboratory mixing TPAsphalt- Part80 Technical testing standard of asphalt for use in road construction - Part 80: Shear test
DIN 1996 Testing of bituminous materials for road building and related purposes; generalities, subject index and statements for the evaluation of tests
Bitumen
Bitumen Product Standards
EN 12591 Bitumen and bituminous binders - Specifications for paving grade bitumen TL Bitumen StB07 Technical delivery conditions for bitumen for use in road construction
Bitumen Test Standards
EN 1425 Bitumen and bituminous binders - Characterization of perceptible properties EN 1426 Bitumen and bituminous binders - Determination of needle penetration
EN 1427 Bitumen and bituminous binders - Determination of softening point - Ring and Ball method
EN 1428 Bitumen and bituminous binders - Determination of water content in bitumen emulsions - Azeotropic distillation method
EN 12593 Bitumen and bituminous binders - Determination of the Fraass breaking point EN 12595 Bitumen and bituminous binders - Determination of kinematic viscosity
EN 12596 Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary EN 13398 Bitumen and bituminous binders - Determination of the elastic recovery of modified bitumen
EN 13589 Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method
EN 13703 Bitumen and bituminous binders - Determination of deformation energy
EN 14770 Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR)
EN 14771 Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR) DIN 52013 Bitumen and bituminous binders - Determination of ductility
Aggregates
Product Standards
Product standards are not hard-coded in LASTRADA, but may be edited as master data. This means that material specifications of every national, regional or company-specific standard can be registered and used as basis for evaluations.
EN 12620 Aggregates for Concrete
EN 13043 Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas EN 13055-1 Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout
EN 13055-2 Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
EN 13139 Aggregates for mortar
EN 13242 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
EN 13285 Unbound mixtures
EN 13383 Armourstone
EN 13450 Aggregates for railway ballast
TL Gestein 04 Technical Delivery Conditions for Aggregates for use in Road Construction
TL SoB Technical Delivery Conditions for Aggregates and Soils in the Installation of Unbound Layers in Road Constructions
BN 918061 Railway ballast (DB AG standard)
BN 918062 Aggregates (DB AG standard)
NVN 6240 Dutch Norm
QCS 2010 Qatar Construction Specification
Test Standards
EN 196-6 Determination of fineness (Blaine) (filler test) EN 196-21 Calcium carbonate content (filler test)
Calcium hydroxide content (filler test)
EN 932-3 Tests for general properties of aggregates - Part 3: Procedure and terminology for simplified petrographic description
EN 933-1 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method EN 933-3 Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index EN 933-4 Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index EN 933-5 Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed and broken
surfaces in coarse aggregate particles
EN 933-6 Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates
EN 933-7 Tests for geometrical properties of aggregates - Part 7: Determination of shell content - Percentage of shells in coarse aggregates
EN 933-8 Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test EN 933-9 Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test
EN 933-10 Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of fillers (air jet sieving) EN 1097-1 Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear
(micro-Deval)
EN 1097-2 Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
EN 1097-3 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids EN 1097-4 Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted
EN 1097-5 Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven
EN 1097-6 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
EN 1097-7 Tests for mechanical and physical properties of aggregates - Part 6: Determination of the particle density of filler (Pyknometer method)
EN 1097-8 Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value EN 1097-9 Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by
abrasion from studded tyres - Nordic test
EN 1367-1 Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing
EN 1367-2 Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test
EN 1367-3 Tests for thermal and weathering properties of aggregates - Part 3: Boiling test for "Sonnenbrand basalt" EN 1367-4 Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage
EN 1367-5 Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock EN 1367-6 Tests for thermal and weathering properties of aggregates. - Part 5: Determination of resistance to freezing and
thawing in the presence of salt (NaCl)
EN 1744-1 Tests for chemical properties of aggregates - Part 1: Chemical analysis
EN 1744-5 Tests for chemical properties of aggregates – Part 5: Determination of acid soluble chloride salts EN 1926 Natural stone test methods - Determination of compressive strength
EN 12370 Natural stone test methods - Determination of resistance to salt crystallisation
EN 12697-11 Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate and bitumen (Part A)
EN 13179-1 Tests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test EN 13179-2 Tests for filler aggregate used in bituminous mixtures - Part 2: Bitumen number
EN 13286-47 Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling
ASTM C 40 Organic Impurities in Fine Aggregates for Concrete
ASTM C 88-99 Soundness of Aggregates by Use of Sodium Sulphate or Magnesium Sulphate ASTM C 117 Materials Finer than 75-µm (No. 200) Sieve in Mineral Aggregates by Washing ASTM C 123 Standard Test Method for Lightweight Particles in Aggregate
ASTM C 127 Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate ASTM C 128 Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
ASTM C 131 Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
ASTM C 136 Sieve Analysis of Fine and Coarse Aggregates
ASTM C 142 Clay lumps and friable particles content
ASTM C 289 Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)
ASTM C 535 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
ASTM D 1883 California Bearing Ratio of Laboratory-Compacted Soils ASTM D 2216 Determination of Water Content of Soil and Rock by Mass
ASTM D 2419 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate ASTM D 2938 Unconfined Compressive Strength of Intact Rock Core
ASTM D 2967 Determination of Tensile Splitting Strength of Rock ASTM D 3967 Splitting Tensile Strength of Intact Rock Core Specimens
ASTM D 4644 Slake Durability Test
BS 812-2 Methods of determination of density
BS 812-103 Sieve Analysis
BS 812-105.1 Determination of Particle Shape - Flakiness Index (FI)
BS 812-105.2 Determination of Particle Shape - Elongation Index of Coarse Aggregate
BS 812-106 Determination of Shell Content in Coarse Aggregate
BS 812-109 Determination of Moisture Content
BS 812-110 Determination of Aggregate Crushing Value (ACV)
BS 812-111 Determination of Ten Per Cent Fines Value (TFV)
BS 812-112 Determination of Aggregate Impact Value (AIV)
BS 812-117 Determination of Water-Soluble Chloride Salts
BS 812-118 Determination of Sulphate Content
BS 1377-2 Soils for civil engineering purposes — Part 2: Classification tests
BS 1377-3 Soils for civil engineering purposes — Part 3: Chemical and electro-chemical tests BS 1377-4 Soils for civil engineering purposes — Part 4: Compaction related tests
BS EN 1367-2 Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test (Annex B) BS EN 1367-4 Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage Alkali standard German alkali standard
DIN 52101 Density determination with Pycnometer
DIN 52102 Density determination with Pycnometer
DIN 52110 Determination of bulk density
DIN 52111 Crystallisation test with sodium sulphate
DIN 52115 Impact test (ballast) after freezing and thawing/ thermal shock / boiling SN 670 321a California bearing ratio
TP Min-Stb Determination of the voids content on dry compacted filler (Rigden) TP Gestein Technical Testing Standards for Aggregates in Road Construction
CIRIA SP 683 Drop Test
CML 1-97 Immersed Rotational Test
Soil / Geotechnical
Determination of Density, Specific Gravity, Compaction Degree, Balloon Method, Soil Core Sampler, Sand Substitute Method, Liquid Substitute Method, Nuclear Gauge (BS 1377-2, BS 1377-9, ASTM D 1556 -07, ASTM D 2167, DIN 18125)
Proctor Test (EN 13286-2, BS 1377-4 Test 3.5 & 3.6, ASTM D 1557-07, DIN 18127)
Sieving and Sedimentation (BS 1377-2, DIN 18123:1996 & 2011, EN ISO/TS 17892-4 incl. Fineness Delta-G in accordance with RVS 8S.05.11)
Plate Bearing Test (DIN 18134, SN 670 317a & b, TP BF-StB-B8.3, NF P94-117-1) Dynamic Probing (EN 22476, DIN 4094-3)
California Bearing Ratio (EN 13286-47, BS 1377-4, ASTM D 1883, TP BF-StB, SN 670 321a) Water Permeability (DIN EN ISO/TS 17892-11, DIN 18130)
Soil Profiles (EN ISO 14688-1, DIN 4022, DIN 4023)
Atterberg Tests (BS 1377-2:1990, ASTM D 4318:1998, DIN 18122:1976 & 1997) Water Soluble Sulphate Content (BS 1377-3)
Acid Soluble Sulphate Content (BS 1377-3) Acid Soluble Chloride Content (BS 1377-3) Organic Matter Content (BS 1377-3)
Soil Groups (DIN 18196 and the Swiss interpretation of the USCS, the SN 670 004-2b)
Geotextile
EN ISO 9863-1 Determination of thickness at specified pressures (Method A) EN ISO 9864 Determination of mass per unit area
EN ISO 10319 Wide-width tensile test EN ISO 10320 Identification on site
EN ISO 11058 Determination of water permeability characteristics normal to the plane, without load EN ISO 12236 Static puncture test (CBR test)
EN ISO 12956 Determination of the characteristic opening size EN ISO 12958 Determination of water flow capacity in their plane EN ISO 13426-2 Strength of internal structural junctions
EN ISO 13427 Abrasion damage
EN ISO 13433 Dynamic perforation test
EN 12224 Determination of the resistance to weathering
EN 12225 Determination of the microbiological resistance by a soil burial test EN 14030 Determination of the resistance to acid and alkaline liquids
RPG Determination of the mechanical filter efficiency compared to silty soils and fine-graded soils
RPG Hydraulic filter efficiency
DIN 18130 Water permeability in the condition as received (TX DE ST U0) DIN 18130 Water permeability after the turbulence test
Drilling Cores
BAW Compressive Strength
BAW Tensile Strength
BAW Tensile Splitting Strength
BAW Static Modulus of Elasticity
BAW Shear Strength
BAW Water Penetration Depth
BAW Water Absorption at Atmospheric Pressure
BAW Water Absorption under Vacuum and at 150 bar
BAW Freeze Test
BAW Freeze-Thaw Test
BAW Chemical Analysis
BAW Visual Inspection (Concrete)
BAW Visual Inspection (Masonry)
BAW Compressive Strength + Water Absorption at Atmospheric Pressure
BAW Tensile Splitting Strength + Water Absorption at Atmospheric Pressure
A module for custom test methods allows users to support tests which are not yet implemented in LASTRADA.
Sealing Products/Systems
EN 1542 Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off
EN 1766 Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing (Chapter 7.2)
EN 13892-8 Methods of test for screes materials – Part 8: Determination of bond strength SIA 281/3 Bitumen jointing: Measurement of bond strength by pull-off
