FTP Server Function
Sony Network Camera
CM120 CS20 DM110 DM160 DS10 DS60
CS50 DF50 DF80 DF85 RX530 RX550 RX570 RZ50
CS11 DF40 DF70 P1 P5 RZ25
CS10
RH124 RH164 RS44 RS46 RS84 RS86
EP104 EP154 EX101 EX104 EX154
CH140 DH140
RS44 RS46 RS84 RS86
EP104 EP154 EX101 EX104 EX154 RH124 RH164 DH240 DH240T DH140T DH180
EX101E CH180 CH240
C O N T E N T S
1.
Features
...3
2.
Benefits
...4
3.
Notes
...4
3.1.
User
Access
Rights
...4
3.2. Camera’s FTP Server Access Rights
...4
3.3.
Maximum number of connections
...4
4. CGI command / Syntax
...5
4.1.
Setting
Command
...5
4.1.1.
FTP
Server
Setting
...5
4.1.2.
User
Setting
...6
4.2. Inquiry Command
...7
Features
1
.
• Users can access to recorded image files via Client PC, if the “FTP Server “ function is activated.
• Recording can be triggered with an alarm , such as Sensor IN and camera side motion detection, by using “FTP Client” function *a.”
• Users can record still image and video into the storage media which was installed to camera, by using the “Local Storage (Image Memory) “ *b function .
• Image files (only still JPEG image) can be sent by e-mail using “SMTP” *c function.
*a) The “FTP Client “ function is a camera function that can be used via the camera setup menu. For details, please refer to “FTP Client Function Application Guide.”
*b) The “Local Storage (Image Memory) ” is a camera function that can be used via the camera setup menu. For details, please refer to “Local Storage Application Guide.”
*c) The “SMTP” function is a camera function that can be set via the camera setup menu. For the details, please refer to “SMTP Function Application Guide.”
Recorded files . . . . . . IP network camera
Mobile
SMTP server FTP server Client PC CF card
3.1. User Access Rights
To use this function, set your authentication level to “administrator” unless otherwise noted.
3.2. Camera’s FTP Server Access Rights
To log in to the camera’s FTP server, make sure to select the “FTP” check box in the User menu for the
corresponding user.
The administrator can always log in to the camera’s FTP server.
Notes:
• (For SNC-CS10/CS11/DF40/DF70/P1/P5/RZ25) To log in to the camera’s FTP server, make sure to select the “FTP User” check box in the User menu for the corresponding user.
• (For SNC-CS3/RZ30/Z20)
To log in to the camera’s FTP server, user registration is required in addition to the camera’s user setting. For details on how to register, refer to the “4.1.2. User Setting” section.
3.3. Maximum number of connections
Up to five network cameras can be connected to the FTP server at a time.
Note:
With regard to SNC-CS3/RZ30/Z20, up to ten cameras can be connected.
Notes
3
.
Benefits
2
.
In conjunction with the “FTP Client” function and “Local Storage” function, users can enjoy the following benefits:
1) Backup for recording server: When a recording server cannot retrieve and record video images, such as when the network or system fails, the local storage feature can be used to store video in the storage media.
2) Reduce the network load during business hours: If video images are stored only in the local storage media during business hours and retrieved from the media using a server or Client PC during off hours, network bandwidth can be used more efficiently.
4.1. Setting Command
4.1.1. FTP Server Setting
CGI Command/Syntax
4
.
CGI Parameter Value Description
ftpserver.cgi
FtpServerFunc on
Activates the FTP server function.
Notes:
• The frame rate and operability on the main sviewerpage may decrease when the FTP server function is used.
• Deactivates the FTP server function before the memory card or other items inserted in the A-slot/B-slot are removed, or before the power of the camera is turned OFF with the memory card inserted.
off Deactivates the FTP server function.
FsRootDir (*1)
builtin
Select when the built-in memory of the camera contains fi les you want to download.
Note:
SNC-CS3/CS10/CS11/DF40/DF70/P1 is NOT equipped with a built-in memory.
a-slot
CH140/CH180/CH240/P5/RH124/RH164/RS44/RS46/ RS84/RS86/RZ25:
Select when the CF memory card inserted in the A-slot contains fi les you want to download.
Note:
(For SNC-CH180/RH124/RS44/RS46)
With the PoE function, this value becomes invalid if set.
EX101/EX104:
Select when the USB memory device inserted in the A-slot contains fi les you want to download.
CS50/RX530/RX550/RX570/RZ50:
Select when the ATA memory card inserted in the A-slot contains fi les you want to download.
b-slot
RX530/RX550/RX570:
Select when the Memory Stick inserted in the B-slot contains fi les you want to download.
DF80/DF85/RZ50:
Select when the CF memory card inserted in the B-slot contains fi les you want to download.
ata-a RZ30/Z20:Select when the ATA memory card inserted in the A-slot contains fi les you want to download.
All Applicable Models All Applicable Models
CGI Syntax:
http://ip_adr/command/ftpserver.cgi?FsUserPassn=value, value
4.1.2. User Setting
CS3 RZ30 Z20 Physical Slot Logical Slot builtin a-slot (ata-a) b-slot (ata-b) RX530/ 550/570 CS50 RZ50 DF50 DF80 /85 *See below EX101/ 104 RZ30 Z20 OtherBuilt-in memory (18 MB) Built-in memory (8 MB)
PCMCIA PCMCIA
PCM CIA N/A
N/A N/A N/A N/A N/A N/A
Compact Flash USB Memory Compact Flash Compact Flash Memory Stick N/A
*1: Logical Slot/Physical Slot table
CGI Syntax:
http://ip_adr/command/ftpserver.cgi?FtpServerFunc=value
http://ip_adr/command/ftpserver.cgi?FsRootDir=value
CGI Parameter Value Description
ftpserver.cgi
FsUserPass1 <user name>,<password>
You can register up to 10 user names and passwords to allow login to the camera using the FTP client software of the computer.
Note:
User names and passwords can be set to between 4 and 16 characters.
FsUserPass2 <user name>,<password> FsUserPass3 <user name>,<password> FsUserPass4 <user name>,<password> FsUserPass5 <user name>,<password> FsUserPass6 <user name>,<password> FsUserPass7 <user name>,<password> FsUserPass8 <user name>,<password> FsUserPass9 <user name>,<password> FsUserPass10 <user name>,<password>
Notes:
• For SNC-CS3/RZ30/Z20:
Level4 users, as well as administrators, can use this command.
• For a description of each parameter, refer to the “4.1. Setting Command” section.
CGI Syntax:1
• For cameras other than SNC-CS3/RZ30/Z20:
http://192.168.0.100/command/inquiry.cgi?inq=ftpserver Return Value: FtpServerFunc=on&FsRootDir=builtin • For SNC-CS3/RZ30/Z20: http://192.168.0.100/command/inquiry.cgi?inq=ftpuser Return Value: FsUserPass1=admin,admin&FsUserPass2=,&FsUserPass3=,&FsUserPass4=.... CGI Syntax:2
• For cameras other than SNC-CS3/RZ30/Z20:
http://192.168.0.100/command/inquiry.cgi?inqjs=ftpserver Return Values: var FtpServerFunc="on" var FsRootDir="builtin" • For SNC-CS3/RZ30/Z20: http://192.168.0.100/command/inquiry.cgi?inqjs=ftpuser Return Values: var FsUserPass1="admin,admin" var FsUserPass2="," var FsUserPass3="," var FsUserPass4="," :
