• No results found

Optimization and Return loss Reduction Of Micro strip Patch Antenna

N/A
N/A
Protected

Academic year: 2020

Share "Optimization and Return loss Reduction Of Micro strip Patch Antenna"

Copied!
8
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 4.1 is referred. Rectangular and square patches are the first and probably the most utilized patch conductor geometries
Fig. 4.2 Representative shapes of microstrip patch elements [7]
Fig. 2.4 Four common feeding methods of microstrip patch antenna [8]
Table. 1 Effects of Feed Location on Return Loss and VSWR
+3

References

Related documents

We here address the modelling of an aerosol hitting the walls of the airways or an endotra- cheal tube used for a mechanical ventilation, and the possible creation of secondary

Babu et al used cinnamaldehyde extracted from Cinna- momum zeylanicum to demonstrate a significant reduction of plasma glucose and HbA1c levels in streptozotcin induced diabetic

The multilayer bandpass filter structure was modelled using thin film optical design 135.. software TFCalc, where the multilayer optical filter structure was designed such that

41 Institute of Particle Physics, University of Toronto, Toronto M5S 1A7, Canada 42 Istituto Nazionale di Fisica Nucleare, University of Trieste/Udine, Italy... 43 University

Alternatively, TCP Vegas uses the congestion avoidance algorithm to prevent packet loss by decreasing its (WND) as soon as it detects an incipient congestion Thus, the

INTERNATIONAL ATOMIC ENERGY AGENCY, Safety Guide, Design of Fire Protection for Nuclear Power Plants, IAEA Safety Series No. Schneider, U.: Ingenieurmethoden im Baulichen

RNA localization: Since overexpression of D-GADD45 in the germ cells affects the dorsal–ventral polarity of the oocyte (Figure 4, Table 1) we decided to check whether the

In this study QSWAT, a QGIS interface for SWAT (Soil and Water Assessment Tool) was used for modelling the sub basin to estimate the runoff and other parameters.. Data has