• No results found

IoT Based Health Monitoring System using Raspberry Pi

N/A
N/A
Protected

Academic year: 2020

Share "IoT Based Health Monitoring System using Raspberry Pi"

Copied!
9
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 2 Block Diagram of Proposed System
Fig. 5 ECG signal loaded from database
Fig. 8 Segmentation
Fig. 10Result- Normal ECG
+2

References

Related documents

It was also observed that, the effect of experiment conditions and parameters such as number of passes, zone length, ambient and coolant temperature, environmental cleanliness and

In intelligent transportation systems, vehicles need only be concerned with activity on the road ahead and not behind (an example of this would be for emergency message

2D: two-dimensional; bp: base pair; DEG: differentially expressed gene; DEGP: differentially expressed gene/protein; DEP: differentially expressed protein; FDR: false discovery

Due to eight radial stub resonators placed inside the free area of a conventional BLC, the novel structure has effectively reduced the occupied area to 10.3% of the conventional

N Rahmani, A Behrad, Automatic marine targets detection using features based on local Gabor binary pattern histogram sequence, in Proceedings of the 1st International Conference

Although there are still limitations on the application of ultrasound on polymer process evaluation, such as the poor long-term stability of transducers at high

This paper also proposes a study based on harmonics with help of Harmonic Analyzer of non-linear domestic/ industrial loads which is being later compared with results of IEEE power

He found that the evolution of postzygotic isolation (Orr 1995; Orr certain hybrid genotypes were consistently sterile, while and Orr 1996; Gavrilets and Hastings 1996; Gavri-