• No results found

Effect of grain size on hardness, bending strength and indentation toughness of multi-doped zirconia ceramics Yonggang Hoo, a, b,* Yusheng Shi aand Wenzhong Lub

N/A
N/A
Protected

Academic year: 2020

Share "Effect of grain size on hardness, bending strength and indentation toughness of multi-doped zirconia ceramics Yonggang Hoo, a, b,* Yusheng Shi aand Wenzhong Lub"

Copied!
13
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 3 Density (g/cm3) of the sintered multi-doped zirconia determined by Archimedes` law
Fig.2 XRD pattern and indentation picture (HV10) of sintered samples with different heating treatment
Table 4 Comparison of indentation toughness (ϔ, Kg/mm) of the sintered samples calculated by our equation (4) and KIC (MPa/m2) calculated by the equation in literature [14]

References

Related documents

The association between depressive symptomatology at baseline and emo- tional loneliness at follow-up was about half the magnitude of the association between emotional loneliness

Front cover image: Female figure made of soapstone, Great Zimbabwe, possibly a modern reproduction, British Museum.. GREAT ZIMBABWE 17th 16th 15th 14th 13th 12th

I will be exploring issues of disclosure in the clinical environment for Transgender and Gender- nonconforming (TGNC) mental health clinicians and how this disclosure—either chosen or

Figure 2D summarizes the developed murine anti-II-1, anti-TTP73 and anti-I-9 antibodies targeting the conserved region of the antibody (grey) or the anti-

Therefore, in the core part of this thesis, different approaches and results are presented guaranteeing fairness, data rate assurance for the MNOs, possibili- ties how to tune

PE firms Elm Creek Partners, Bowside Capital and 747 Capital LLC acquired Houston‐based home health respiratory medical equipment services provider TCG Interests, Ltd. – San

The Tampa-Orlando High Speed Rail Service pro- posed technology and Operating Plan will deliver a system travel time that is less than the Authority’s requirement for a 1-hour

This paper has presented the results of a survey conducted on Malaysian electronics and electrical SMEs, which had the prime purpose of investigating the level of quality