• No results found

The impact of arm position and pulse pressure on the validation of a wrist-cuff blood pressure measurement device in a high risk population

N/A
N/A
Protected

Academic year: 2020

Share "The impact of arm position and pulse pressure on the validation of a wrist-cuff blood pressure measurement device in a high risk population"

Copied!
7
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 1 Grading criteria used by the Bhs (1993). Grades are cumulative percentage of reading; values are mmhg
Table 4 Pearson correlation of M and W measurements
Table 5 Validation assessment according to Bhs and AAMI criteria.  Values are percentages

References

Related documents

The use of sodium polyacrylate in concrete as a super absorbent polymer has promising potential to increase numerous concrete properties, including concrete

We reviewed the clinical experience of tacrolimus use in Chinese liver- and kidney-transplant patients, including the pharmacology of tacrolimus, the immunosuppressive effects

After the assay parameters were optimized, growth of target cells (MH-FBS agar plates), target cell number (100 CFU/per well), human complement source used at a final concentration

To evaluate the effectiveness of providing a stretch length equivalent to 8 bar diameters and/or a steel chair designed to yield, single anchor tests are performed by loading

was associated with lower physical quality of life among earthquake and flood survivors in Iran and China, [26, 56] lower physical functioning in Iran, Rwanda, and Syrian refugees

Outcome measures were all-cause in-hospital death, stroke, acute kidney injury and tracheotomy, and composite adverse events (consisting of all-cause in-hospital death, stroke,

from a technical mixture with higher degree of chlorination to a technical mixture with lower degree of chlorination over this time period, (2) early, industrial, or combustion

The single variable beam theories taking into account effect of transverse shear deformation for the buckling, bending and free vibration analysis of the thick beam