• No results found

1. Heat transfer augmentation techniques in a plate-fin heat exchanger

N/A
N/A
Protected

Academic year: 2020

Share "1. Heat transfer augmentation techniques in a plate-fin heat exchanger"

Copied!
5
0
0

Loading.... (view fulltext now)

Full text

Loading

References

Related documents

[18] experimentally investigated the heat transfer and friction factor of nanofluids as a coolant in corrugated plate heat exchangers; and the nanofluids so used, highest

Das, S.K., 2006, “An experimental investigation of the port flow maldistribution in small and large plate package heat exchangers Applied Thermal Engineering 26,

The paper present analysis of calculation of heat transfer coefficient, fin efficiency on the fin inside one-tube plate finned-tube heat exchangers for various air inlet speeds

The effects of the heat input, number of fin plate and number of slots on plate on the convective heat transfer coefficient and pressure drop characteristics

(4) The present study shows that the proposed heat transfer enhancement techniques are all have advantages over the traditional wavy fin. Perforation is beneficial to enhance the

Sheng Leu 3 numerically and experimentally examined heat transfer and flow in plate and fin heat exchanger and identified vortex generator promote heat enhancement in

Pada penelitian ini akan dirancang sebuah heat exchanger dengan menggunakan tipe plate fin heat exchanger, dimana fluida yang mengalir pada sisi plate adalah udara dan fluida

Helical tubes are universally used in chemical reactors, ocean engineering, heat exchangers, piping system and many other engineering applications.. Based on the