• No results found

A New Approach with Three Dimension Figure and ANSI/IEEE C57 104 Standard Rule Diagnoses Transformer’s Insulating Oil

N/A
N/A
Protected

Academic year: 2020

Share "A New Approach with Three Dimension Figure and ANSI/IEEE C57 104 Standard Rule Diagnoses Transformer’s Insulating Oil"

Copied!
9
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 2. The diagnosis of IEC basic code [2].
Table 3. Gas content in oil diagnostic [3] (unit: ppm).
Table 5. Transformer fault diagnosis tool (Ba Dou D/S #4DTr before repair).
Figure 2. Program for digital flow chart.
+3

References

Related documents

These cracks distributed from microscopic to macroscopicIn order to realize the material,multi-resolution damage method need an equivalent transformation method, makes

Processing the buckwheat straw with two ionic liquids resulted in the disintegration of the ordered fibrous structure of the biomass as well as reduction in the content

Our results show that the rats via IP injection at a dose of mercury from 0.25 mg / kg, causes a diminition in phagocytic activity after 48 hours of injection and

The design of the robot controller is based on STM32F103VET6 as the main control chip, the car through the ultrasonic ranging to get the distance of the obstacle

The second instructional focus for this module was to teach students the normal and abnormal ranges for the four vital signs of body temperature, pulse rate, respiration rate,

4:- Normalize the exponent of in2 by adding the amount d, expo2=expo2 (previous value) + d. now it is normalize because expo2 and expo1 are equal. 7:- Check for the carry

[r]

Individuals who are covered by non-employment-based health insur- ance, for example, through policies purchased individually in the private market, through trade associations,