• No results found

Optimal Design for MIMO Relay System

N/A
N/A
Protected

Academic year: 2020

Share "Optimal Design for MIMO Relay System"

Copied!
5
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 1. Procedure of Iterative Algorithm.
Figure 2. MSE versus Power, Ns = Nr = Nd = M = 2.

References

Related documents

To proceed next setting press DOWN button.To exit programming mode, press the PROG button.. The user will be prompted to confirm the saving of settings if change

The results were supported by previous studies, which stated that solvent to oil ratio is an important parameter since it gives major effect in producing biodiesel because

The Type-IV features (Figure 3) consist of our baseline 40- dimensional speaker adapted features that have been spliced again, followed by de-correlation and dimensionality

Twenty-seven patients with bipolar I disorder (n = 11) or bipolar II disorder (n = 16) experiencing a major depressive episode while on adequately dosed treatment of lithium

Figure C.16: Subject 6: Temporally aligned discrimination graphs map centred on the frame onset time showing differen- tiating activity related to target image detection com- pared

Example: PRT Interval Coding Data Collection Sheet Vismara, L.. Example: PRT interval coding data

CRM system is often integrated with other decision support systems such as Enterprise Resource Planning System and Supply Chain Management. With the integrated

the requested location is retrieved from the on-device cache, and then, it is sent to the requesting app (with privacy rules applied). Besides, geographic tool 5 can be incorporated