• No results found

Wireless electroinstalation. Product ranges

N/A
N/A
Protected

Academic year: 2021

Share "Wireless electroinstalation. Product ranges"

Copied!
42
0
0

Loading.... (view fulltext now)

Full text

(1)
(2)

History:

2008: Launch of the RF Control system

2009: RF Control & Oasis compatible

2010: RF Touch introduced

2011: RF Pilot available

2012: eLAN-RF-003 started to be sell

www.inels.cz

Wireless electroinstalation

(3)

General information:

• iNELS RF Control – is a wireless installation system used mainly for home automatization…

• Range up to 200 meters

• 32 chanels for each receiver

• Operating frequency 868 MHz of iNELS RF Control is used only for automations in building, transmission of power 24mW

• Transmitters powered by batteries

• Several types of communication (iNELS RF Control used two way)

• Possibility of upgrade system

(4)

What brings you iNELS RF Control

• Simple installation

Reconstruction

with RF Control

will save you time

and money.

• It opens a new dimension of controlling

• It upgrades the system

• The price of installation is acceptable for everyone

www.inels.cz

(5)

Term definition:

R

F

S

A

-6

1

M

Radio

Frequency

Switching

Actuator

6 Function

1 Channel

Module

R

F

D

A

-1

1

B

Radio

Frequency

Dimming

Actuator

1 Function

1 Channel

Box

(6)

RF Sets

Supplied as a combination

of selected transmitters

and receivers or as a

complete set of switching

and dimming actuators

together with selected

transmitters.

www.inels.cz

(7)

U

N

I

T

S

O

V

E

R

V

I

E

W

(8)

U

N

I

T

S

O

V

E

R

V

I

E

W

www.inels.cz Wireless electroinstalation

(9)

Wireless wall switch button

RFWB-20/G, RFWB-40/G

• Transmitters are powered by batteries (battery life up to 5 years depending on use)

• Switches are in luxurious design LOGUS90

• Fast and easy installation to any surface

Each transmitter can control unlimited amount of receivers in the area of RF signal coverage

(10)

Pocket RF KEY controller

Portable transmitter for control of RF Control units

Perfect for garage door control

Always with you thanks to its small size

Battery life up to 5 years depending on use

Design: black or white

www.inels.cz

(11)

Universal transmitter module

RFIM-20B, RFIM- 40B

• Designed for installation under existing switches (which become wireless)

RFIM-20B: 2 inputs, designed to be switched by

buttons, impulse or as a permanently switched contact

RFIM-40B: 4 inputs, designed to be switched by buttons, impulse or as a permanently switched contact Examples of use:

(12)

Temperature regulator

RFTC-10/G; RFTC-50/G

RFTC-10/G is a simple temperature

regulator and it can be used in two ways:

1. with switching actuators RFSA / RFSC according to set temperature it switches on/off the heating system.

2. with the RF Touch unit for temporary temperature correction (+ / - 10 ° C) during the program set in the RF Touch unit.

RFTC-50/G is a programmable

temperature regulator, which offers a possibility to set the weekly program (up to 6 modes). Temperature

regulation works automatically in cooperation with switching actuators RFSA / RFSC.

www.inels.cz

(13)

Universal transmitter module

RFSG-1M

• Suitable for frequent signal transmissions thanks to 230 V power supply • Perfect for: - switching of HDO (low / high tariff)

(14)

Wireless temperature sensor

RFTI-10B

No need for external power supply (powered by internal battery)

Miniature size suitable for fitting into the installation box

Perfect for secure measuring of water temperature

Temperature sensor for RF Touch-W and RF Touch-B units

www.inels.cz

(15)

OASiS detectors

• Detectors OASiS can be used

with a combination with RF

Touch or directly with switching

actuators

JA-80P

PIR motion detector JA-81M

Magnetic door detector

JA-82M

(16)

RF Touch-B, RF-Touch-W

RF Touch can be used for:

- central control of all units from one place

- complete overview of actual status of all units

• Touch sensitive 3,5“ inches color display

• RF Touch frames in basic plastic (black, white) or luxurious design Logus90 (glass, metal)

RF Touch-B: for wall box installation mounting (230 V AC)

RF Touch-W: for surface mounting with power supply from back

side (85-230 V AC) or side power supply connector (12 V DC)

www.inels.cz

(17)

RF Touch-B and RF-Touch-W

- are sending commands to temperature, switching, dimming and blinds actuators - are receiving commands from transmitters, controllers and temperature sensors - are processing programs from heating and regulation

(18)

Range of comunication RF Touch

www.inels.cz

(19)
(20)

Switching actuator with temperature sensor

RFSTI-11B;G

• Wireless actuator with temperature sensor functions: • - temperature measurement

• - processing and sending information to RF Touch

• - receiving instruction to switch on the heating device • RFSTI-11B:

• --terminal for external sensor • RFSTI-11/G:

• -LOGUS90 design with manual control by buttons on the front panel

• -LED indicator of the switch status on the front panel ON - red LED, OFF - blue LED

• -an in-built sensor, terminals for connection of external sensor.

Function: combi thermostat

20

www.inels.cz

(21)

Wirelless thermovalve RFATV-1

• used to measure the temperature in the given zone

• It is an ideal solution for reconstructions = quick integration of heating regulation

(22)

Switching actuators 11B,

RFSA-61B, RFSA-62B,

RFSAI-61B

• Functions (for 6x multifunction actuators):

button, switch ON, switch OFF, impulse relay,

delayed ON, delayed OFF (2s-60 min.)

• Switching actuators for control of

appliances, lights, heating, electrical…

www.inels.cz

(23)

Switched socket

RFSC-11 a RFSC-61

• this is a quick solution for wireless control of appliances

• is connected between the existing socket and controlled appliance • RFSC-11: single-function design -

switch on, switch off

• RFSC-61: multifunction design - button switch on/off , impulse relays, delayed return, delayed start programming

(24)

Switching actuator with enhanced IP65

protection RFUS-11, RFUS-61

RF switching actuators with enhanced IP 65 protection are designed

for use in harsh environments: dusty, dirty environments, outdoors, cellars, greenhouses, boiler rooms, reservoirs and tanks,

refrigeration boxes…

www.inels.cz

(25)

Dimming actuator

RFDA-11B,71/B; RFDEL-71B

• Automatic switch OFF in case of overload or short circuit

• RFDA-11B: single function – controlled by a wall switch button • RFDA-71B/RFDEL-71B: multifunction - 6 light functions : ON/OFF,

possibility of steeples dimming UP/DOWN (2s – 30 min)

Dimming actuators for dimming of lights and making of light scenes For dimming:

(26)

Universal dimming socket

RFDSC-11, RFDSC-71

the dimming socket offers a simple solution for dimming lamps and

lights plugged into the socket, this socket is simply positioned between the existing outlet and the light

it enables dimming of the following light sources: R, L, C, LED, ESL

www.inels.cz

(27)

LED strip dimmer RFDA-73/RGB

• used to dim LED strips and RGB LED strips with power supply 12-24V DC

• control is performed by wireless transmitters or signal 0-10V/ 1-10V or iNELS DAC converter

(28)

Shutter actuators

RFJA-12B/230 V, RFJA-12B/24V DC

RFJA-12B/230 V

• For switching of 230 V AC drives, which are controlled in two

directions and have build-in protection and position switch

Switching actuators specially designed for control of

shutters, blinds, jalousies, garage doors etc.

RFJA-12B/24V DC

• Perfect for interfenestral blinds

• Solid state relay for noiseless switching

www.inels.cz

(29)

Analogue output actuator

0(1)–10V RFDAC-71B

Two modes of output:

0 – 10 V for regulation of thermo valves 1 – 10 V for regulation of tubes

• Perfect for:

Combination with dimmable ballast

for dimming of fluorescent tube lights

• Control different power dimmers

• Control of regulators (thermostatic valves, ventilation, motors etc.)

(30)

Switching actuators

RFSA-61M, RFSA-66M

• Functions: button, switch ON, switch OFF, impuls relay, delayed ON, delayed OFF (2s – 60 min)

For control of appliances, lights, garage door etc.

RFSA-61M: 1-channel switching

actuator in a single DIN module design. With internal or external antenna

RFSA-66M: 6-channels switching

actuator in 3-DIN module design. With internal or external antenna

www.inels.cz

(31)

RF Pilot

• Complete solution for home appliances and devices

• Controls up to 40 actuators • Easy set-up and control

• Perfect design with OLED display • Range up to 200 m

• Frequency 868 MHz

• RF Pilot can be fully personalised to suit your needs. You can create your own menu and name all devices for better overview.

(32)

Wireless manager

RFAP/USB

RFAP/USB - forms a

communication interface

between units of the RF Control system and a PC with the

• Windows operating system or Linux with USB interface

• The SW application Virtual RF Touch simulates the function of the RF Touch touch screen unit

www.inels.cz

(33)

Clever box

eLAN-RF-003, eLAN-RF-Wi-003

- the device is used to control lights,

blinds, heating ... with your smart phone or tablet

connection of devices is done through - eLAN-RF-003: wired Ethernet access where router is necessary

- eLAN-RF-Wi-003: wired Ethernet access or wireless access using Wi-Fi network - the smart

phone or tablet is suffi cient to control controlling possibilities are:

- Web Browser

(34)

apps MARF, MIRF,

iHC-TARF, iHC-TIRF

www.inels.cz

Wireless electroinstalation

iNELS Home Control application can be controlled using your smart phone or tablet.

You‘ll be able to control the lighting, blinds, heating (even in weekly

programming scenarios) or create a scene according to the atmosphere. It‘s been designed for Android and iOS

(35)

Multifunction GSM communicator

RFGSM-220M

• The GSM communicator can be used for remote switching of heating, lights, barriers, gates and for ascertaining the status of the RF Control actuator (ON, OFF, temperature level)

(36)

RFGSM-220M

www.inels.cz

(37)

Repeater RFRP-20

• the radio frequency signal repeater extends the range between the transmitter and the receiver by 200 meters

(38)

Wireless flooding sensor

RFSF-1

• RFSF-1B serves as a wireless flooding detector, which after activation immediately sends a signal about a detection of water to switching actuator (or to RF Touch unit), which switches on the pump or close the valve on the pipe.

• Flood sensor is designed for flood detection especially in residential areas, overflowing tubs, disorders of

washing machines, dishwashers, boilers, etc.

www.inels.cz

(39)

Wireless twilight switch

RFSOU-1

• serves for control of blinds, marquis, lights and other appliances depending on the level of ambient light intensity

• outside version in IP65 for wall mounting • inbuilt light sensor

• two devices in one, function is selected by a rotary switch:

1. twilight switch 2. light switch

(40)

Coming soon…

Electricity meter

RFPM-1

www.inels.cz

(41)
(42)

Thank you

for your

References

Related documents

In the present study, we developed a simple and rapid method for the simultaneous measurement of plasma concentrations of four first-line drugs (pyrazinamide,

The solution that we propose to the issue of Roaming in wireless community networks is done in two parts: (1) the proposal of a Protocol (RRP) enabling an LDAP server to behave as

The Nominating Committee suggests for Chairman of District IV, the name of

During her high school years, Brittany worked as a cashier at her local Chick- fil-A, and during college, she continued to work when she came home on breaks.. While at

It can be concluded that the presented robot has the design criteria such as suitable degrees of freedom, low inertia and high safety and so is suitable for gait

Microarray analysis of heart tissue RNA revealed that the T1D mice differentially expressed 10 genes compared to control.. Using Ingenuity Pathway Analysis (IPA), we showed that

The results showed that knockdown of SYNJ2BP decreased DLL4 expression level in HCC (Fig. 6b), however, there ’ s no expression difference of DLL1 and VEGF between Hep3B NC and