• No results found

On the suitability of high vacuum electrospray deposition for the fabrication of molecular electronic devices

N/A
N/A
Protected

Academic year: 2020

Share "On the suitability of high vacuum electrospray deposition for the fabrication of molecular electronic devices"

Copied!
13
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1: a) Schematic of the Molecularspray UHV4 system used to fabricate bi-layerstructures.b-d) ToF-SIMS images built using markers for SiO2, PVP and fluoresceinrespectively
Figure 2: a) Geometry used to co-deposit molecules from two solutions using two Molec-ularspray UHV4 systems
Figure 3: a) The electrospray deposition source used to deposit PEDOT:PSS consisted ofone less pumping stage than the UHV4 source used in the previous sections

References

Related documents

This study aims to describe the housing conditions and health status of a sample of people assisted by Caritas Barcelona (Spain) and living in inadequate housing and/or struggling

In this work, we use the relationships between some matrix elements of the electromagnetic current of the plus component, “+” for the rho meson [ 20 ], in order to get

Materials and Methods: The specificity of the assay was tested using reference strains of vancomycin-resistant and susceptible enterococci.. In total, 193

In the testing phase of this research uses two testing, testing the first testing the strength of the encryption process after ciphertext randomness using

Finally the aims of this study to determine the indicators of evaluate of children with mathematics learning disabilities, the level of visual discrimination

The results of this study showed that in 2010, in France, about 1 to 10 patients managed for primary lung cancer in the respiratory department of a general hospital died within 1

Results: Serum copper and zinc were elevated in asthmatic children compared to controls with no relation to clinical manifestations or laboratory parameters .Serum lead

diallylacetic acid rather than bismuth since in one case in which analysis was performed only minute amounts of bismuth were recovered, and there was, in his opinion, ‘ ‘no