• No results found

Optimal Performance of Mechanical Load Factor for the Solar Photovoltaic Electromechanical System

N/A
N/A
Protected

Academic year: 2020

Share "Optimal Performance of Mechanical Load Factor for the Solar Photovoltaic Electromechanical System"

Copied!
8
0
0

Loading.... (view fulltext now)

Full text

Loading

References

Related documents

Although many data exist on the alkane content and composition of various compo- nents of temperate marine ecosystems there is as yet little known about their polynuclear

A seismic wave excitation test was carried out in linear and nonlinear states to investigate the effect of non-linearity (jumping due to vertical vibration, the gap of the upper

Stationary phase cells: On immediate plating (Table 2 and Figure l ) , the bi- phasic curve seen for UV induction of rho- mutants as a function of dose is also

The observation that grain legume crops in the tropics do not respond to fertilisers may be largely due to (a) failure to appreciate that legimec can fix

The first shell bond length determined by the present method shows good agreement with the experimental value calculated using LSS method, Fourier transform method

Hybrid approach use MICR (Myanmar Intelligent Character Recognition) and back-propagation neural network. In Hybrid approach, the features of MICR have been used in back-propagation

When analysed by specialty, MYHT showed no signifi- cant difference in the duration of consultations using digitized records compared with consultations using paper records (see