Safety is Top of Mind

(1)

Artwork Charges:

If supplying artwork electronically, see page 52 for art preparation information.

• Artwork charges: When we prepare your camera-ready

artwork, a fee will be charged. Estimates will be provided per individual job. $70.00 (G) per hour.

• Templates: Call for printing and artwork guidelines, or visit www.3M.com/templates.

Cancellation Charge:

All orders are considered firm and cannot be cancelled except on written authorization from factory. If 3M’s factory authorizes the cancellation, then 3M will charge the customer cancellation fee of $55.00 (X) plus any accrued

charges (artwork, proofs, materials, etc.).

Ink Charges:

• PMS Inks: Exact color match cannot be guaranteed. No

additional charge except fluorescent, special mix and metallic: $285.00 (G) per color. PMS Inks not available

for all products, see individual products for details.

Insert Charges:

Call for quote.

NOTE: Inserts or labels must arrive at the factory within three (3) days of a complete order/proof approval, or the

delivery schedule will be affected.

Intellectual Property:

When orders are printed to customer’s specifications, the purchaser agrees to indemnify supplier and assume any liability resulting from actions or demands brought against supplier for infringement of any copyright, trademark or other intellectual property right. By placing an order, customer admits the validity and enforceability of the 3M trademarks associated with the product(s) ordered, acknowledges 3M's exclusive ownership of and exclusive right to use them, and acknowledges that any and all rights that might be acquired by any use of the 3M trademarks in connection with the resale or distribution of the ordered products shall inure to the sole benefit of 3M. Customer agrees that it shall not use or register in any country any domain name or URL that consists of, resembles, contains, or would be likely to cause confusion with or dilute the distinctive quality of any of 3M's trademarks.

Labeling Charges:

If labels are supplied by 3M, there will be a set-up charge of $15.00 (G) per set of labels and a per label

charge of $0.15 (G).

Overrun & Underrun Charges:

• Orders are subject to maximum 5% overrun/ 10% underrun.

• Exact quantity: 5% upcharge

Paper Colors and Upcharges:

All paper colors are uncoated stock.

• Recycled Paper: 10% upcharge—Canary Yellow,

White or Spring Green paper only, uncoated stock. Meets Federal requirements for recycled content.

• Neon/Ultra Papers: 15% upcharge—Ultra Yellow, Neon

Pink, Peach Azalea, Neon Lime, Neon Orange and Ultra Grape. NOTE: It is highly recommended that black ink be

used on neon and ultra papers.

Pricing:

Pricing subject to change without notice. Prices are based on a single product configuration. The price for a particular product configuration will be determined by the total quantity of that product configuration on a purchase order requesting a single shipment. Orders requesting multiple shipments will be priced using the total quantity of that product configuration on each requested shipment. Orders for immediate shipment bill at the prices in effect on the order date. Orders specifying a future delivery are billed at prices in effect on the requested shipment date.

Production Rush Charges:

“Rush” service may be available with handling charge—

call for quote and approval. For unlisted quantities— call for quote. For normal production time on products, see pages 42–46. 3M will make a good faith effort to ship orders within the published production times.

Prototypes:

Refer to Speculative Samples.

Quantity Pricing:

For quantities not shown in printed/on-line catalog— call for quote.

Shipping Charges and Requirements:

• Prices are F.O.B. point of shipment with transportation

charges prepaid and charged. When routing is not specified on the order, 3M will use the most direct or least expensive method, at 3M’s option.

• Special Delivery Requirements: If shipment of

merchandise requires inside delivery or other special handling, instructions must be clearly described on order form. NOTE: Shippers will charge extra for this service.

• Drop Shipments: Orders may be shipped to more than

one location. The request to drop ship part of an order to additional locations must be received with the order to ensure an accurate delivery schedule. 3M will charge

$5.50 (G) for each additional location and method.

If specific drop shipment addresses and/or shipping labels do not arrive at 3M’s factory within three (3) days

of a complete order/proof approval, then the delivery schedule will be affected.

Shipping Charges and Requirements

(cont.):

• Inventory Release: Orders requesting partial shipments

to be made at different intervals are subject to a

$65.00 (G) additional charge per shipment. The product

will be invoiced with each release as shipped. The maximum order size to qualify is catalog end column. First release must equal at least one-third of the total PO quantity. First release must ship within normal catalog production time. The distributor must sign agreement of these terms prior to production. The

entire order must be shipped and billed within 180 days from 3M’s receipt of the original order. Releases shipping in next calendar year will be billed at price in effect at time of shipment.

• Freight Claims: Customer is legally responsible when

merchandise is consigned to carrier.

Speculative Samples:

Speculative samples are approximate representations of custom printed products. They are made for raising customer interest. Speculative sample artwork quality is only suitable to convey design concepts. A speculative sample is not a press proof.

• There are two basic kinds of speculative samples: 1) Virtual Samples: Computer files that are

viewed on computer screen and/or printed with a desktop printer. Readily sent via e-mail as links or attachments. Virtual samples are available for all products shown in the catalog.

2) Prototypes: Physical mock-ups; usually made of

paper. Prototypes are subject to availability. • Art Requirements: Artwork and layout instructions are

needed with all speculative sample requests. Three types of artwork can be used:

a) Mechanical — literature, label, photo, etc. b) Digital Files — including: .eps, .tif, .jpg, .ai, .bmp c) Internet — images downloaded or captured from the web (.jpg or .gif). Must be cropped to show intent.

NOTE: 3M will not create original artwork such as

photography, illustrations or most typeset copy for speculative samples.

• Pricing: Pricing varies by product and complexity of

design. Call for pricing and additional information on how speculative samples can be ordered.

Terms:

Net 30 days from 3M’s invoice date.

Visa, Mastercard and American Express accepted. n

Warranty and Limited Remedy: 3M warrants that the products will be merchantable at the time of

shipment and will reasonably conform to an approved proof. THESE WARRANTIES ARE MADE

IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED

TO THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ANY IMPLIED

WARRANTY ARISING OUT OF A COURSE OF DEALING OR OF PERFORMANCE, CUSTOM OR

USAGE OF TRADE. If any product is proved to be defective, 3M’s entire liability and buyer’s

exclusive remedy will be, at 3M’s option, 1) replacement of the quantity of the product which is

defective or 2) refund of the purchase price.

Limitation of Liability: 3M shall not be liable for direct, indirect, special, incidental or consequential

damages based upon breach of warranty, breach of contract, negligence, strict liability or any

other legal theory. The foregoing Warranty and Limited Remedy and Limitation of Liability may

not be changed without a written amendment signed by officers of 3M and seller.

Warranty and Limited Remedy, Limitation of Liability For All Products

General Information—For All Products

Please also refer to the Conditions of Sale, Additional Charges and Product Specifications (pages 41–46) for each product.

Safety is

top of Mind

The EHS Management

System Promotes

Sound Environmental

Management of Our

Facilities Worldwide.

Fast, Easy and Convenient —

Deliver your art production files

electronically! Details on page 52.

40

(2)

W

arranty & General Information and Conditions of Sale

Assortability:

Not Available.

Backsheet Printing Charges:

Backsheet = Liner of pad or cube.

Standard backsheets are supplied on ALL pads and cubes.

For custom printed single or multiple backsheets, call for availability and quote.

Bleeds:

• Notes: No bleeds on quantities less than 500. No bleeds on

2" x 3" and 2-3/4" x 3" sizes. Restrictions apply for copy and design bleeds. Call for approval and quote.

• Value Priced Program: Restrictions may apply on bleeds.

Call for charges and details.

• Notes Cubes:

– Cube Sheets: No bleeds.

– Cube Sides: Restrictions apply for copy and design bleeds. Call for approval and quote.

Colors for Angle Note Standard Designs:

Standard art requires 2-color printing. Colors for each design are listed below. Additional colors will increase cost.

• Art 1— Marble: PMS 149 and Black • Art 2— Dollar Bills: PMS 7479 and Black • Art 3— Pennies: PMS 7507 and PMS 483 • Art 4— EKG: PMS 347 and Black • Art 5— Writing: PMS 325 and Black • Art 6— Blocks: PMS 149 and Black • Art 7— Stethoscope: PMS 297 and Black

Copy Change Charges:

• Notes, Executive Style Notes, Die-Cut Notes, Angle Note Pads, Super Sticky: $25.00 (G) per copy change—

catalog quantities only. NOTE: 2 color printing changes

in copy allowed with only one of the two colors selected. Copy change location and color must remain the same. – Minimum copy change quantity = 500

– Minimum order quantity = 1000

• Value Priced Program: $25.00 (G) per copy change—

orders must be placed in increments of 50 pads per copy. Minimum total order quantity is 500. • Notes Cubes: Call for quote.

Die Charges:

• Standard Die-Cut Shape Pricing: No additional die or

set-up charge when using standard shapes. Not available for quantities under 500. For sheet counts or quantities not shown — call for quote. Visit www.3M.com/ndl for complete list of standard shapes.

• Custom Die-Cut Shapes: Call for quote.

• Value Priced Program: Not Available.

• Notes Cubes: Not Available.

Imprint Area:

Visit www.3M.com/templates for printing specifications.

Ink Charges:

• PMS Inks: No additional charge except fluorescent,

special mix and metallic: $285.00 (G) per color.

PMS Inks not available for Value Priced Program or 4-color process printing (PMS Inks will be converted to closest possible 4-color process match. Exact match cannot be guaranteed).

Ink Colors:

• Popular Standard Inks for Notes, Die-Cut Notes, Angle Note Pads, Super Sticky and Notes Cubes:

Black Green/PMS 347 Blue/PMS 300 Purple/PMS 527 Brown/PMS 168 Red/PMS 185 Burgundy/PMS 215 Teal/PMS 320

NOTE: PMS number listed next to Standard Color is a

very close representation of standard color. Exact match cannot be guaranteed. Not all colors provide high contrast on all products. 4-color process available—call for quote.

• Popular Standard Inks for Executive Style Notes:

Black Brown/PMS 168 Blue/PMS 300 Burgundy/PMS 215 • Popular Standard Inks for Value Priced Program: All

PMS inks will be converted to the closest possible 4-color process match. Exact color match cannot be guaranteed. If color match is critical, we suggest using our Exact Color Match offering with true spot color printing. No fluorescent, special mix or metallic inks.

Standard 4-Color Process Colors:

Green Deep Green Forest Green Blue Royal Blue Navy Blue Red Candy Apple Red Deep Red Teal Purple Orange Brown Burgundy Cool Gray Black Yellow Cyan Magenta • Second Color: Means two (2) ink colors on one side of

sheet or one (1) ink color on each side of sheet. • Ink Coverage in Adhesive Area:

– Notes, Die-Cut Notes and Angle Note Pads: 100%

solid copy in the adhesive area is not recommended. – Super Sticky: No imprint in adhesive area.

– Notes Cubes: 100% solid copy in the adhesive area is

not recommended on cube sheets. Ink color on adhesive side of cube may vary slightly from the other sides. 4-color process available—call for quote. • Ink Tints: Available in 5%, 10% or 40%. Screened

imprint images not available for Executive Style Notes.

NOTE: “Phantom” or “shadow” printing should

be limited to 5% tint, but consideration should be given as to writeability over image printed.

Minimum Order:

• Notes:

2" x 3", 2-3/4" x 3", 3" x 3", 3" x 4",

3" x 5", 4" x 4", 4" x 6": . . . 500 • Super Sticky Notes: . . . 500

• Executive Style Notes: . . . 500

• Value Priced Program:

2-3/4" x 3", 3" x 4", 4" x 6" . . . 500 Note: Orders must be placed in increments

of 500 or 1000 qty.

• Angle Note Pads: . . . 500

• Die-Cut Notes (Standard Shapes): . . . 500

• Notes Slim Cubes: . . . 125

• Notes Cubes: For Notes Cubes, minimum

quantities vary depending on imprint options: 1 or 2 colors: same 1 design all sides: . . . 100/250 1 color: 2 or more different side designs: . . . 500 2 colors: 2 different designs: . . . 250 3–4 colors: same 1 design all sides: . . . 250/500 4 different designs, each side a different 1 color: . . . . 500 4-color process: 4 different designs,

each side a different design (where available): . . . 250

Packaging Charges and Requirements:

• Case Quantity/Weights: See individual product pages.

• Die-Cut Notes: Shipped bulk—call for specifications.

• Special wrapping or packaging: Call for quote

and availability.

• Special packaging requirements: Any special packaging

requirements must accompany the order to ensure that an accurate delivery schedule can be established. Inserts or labels must arrive at the factory within three (3) working

days of a complete order/proof approval, or the delivery schedule will be affected.

Pallets for Notes Cubes:

Call for delivery schedule.

• Small 2-3/4" x 2-3/4" Mini-Pallet (fits C345, C690,

C2100, N400): Add 99¢ (G) for all quantities.

• Medium 3-3/8" x 3-3/8" Mini-Pallet (fits C900, C450,

C3100): Add 99¢ (G) for all quantities.

• Large 4" x 4" Mini-Pallet (fits C525, C262): Add 99¢ (G)

for all quantities.

Paper Change Charges:

Copy and ink must remain the same, call for quote. • Minimum per Change — 500 quantity • Minimum per Order — 1000 quantity

• Not available for Super Sticky and Value Priced Program.

Paper Colors and Charges:

All paper colors are uncoated stock.

Standard Paper Colors:

• Notes, Angle Note Pads and Die-Cut Notes

Sky Blue Cream Spring Green Light Gray Carnation White Canary Yellow

• Executive Style Notes: White paper strongly

recommended with one of the following printed backgrounds: Linen, Granite or Parchment. • Super Sticky: White paper only.

• Value Priced Program: White paper only.

• Notes Cubes:

– White paper only for 4-color process printing for all quantities.

– C345, C690, C262, C525

250-499 quantity: White Paper only

500–4999 quantity: Sky Blue, Cream, Spring Green,

Light Gray, Carnation, White, Canary Yellow.

– CM218, C450, C900, C2100, C3100: White paper only,

all quantities.

– N400: 5 colors per cube: Ultra Yellow, Neon Orange,

Neon Pink, Peach Azalea and Neon Lime.

– Solid Neon/Ultra Notes Cubes: Add 15% upcharge

to base price.

• Recycled Paper: 10% Upcharge, Canary Yellow, White

or Spring Green paper only. Meets Federal requirements for recycled content.

• Neon/Ultra Papers: 15% Upcharge:

Ultra Yellow Neon Pink Neon Orange Peach Azalea Neon Lime Ultra Grape

Note: It is highly recommended that black ink be used

on neon and ultra papers.

Plates, Screens and Set-up Charges:

No charge except: Two-sided printing on notes. (Custom

printing on both sides of the Post-it®_{Note sheet.) Two}

sets of camera-ready art necessary. A different ink color may be used on each side. All copy and art on the backside of the sheet must be a minimum of 1"–1-3/4" (call for details) from the edge of the paper where the adhesive is applied. $145.00 (G) set-up plus 2 color price

applies. Call for quote if more than 1 color per side. Continued on page 42.

As Always...

4 Free PMS inks*

4 Free Screens

4 Free Set-up on Notes and

4 Free Ruled Lines

(upon request)

Note Cube Sheets/Sides

4 Free Virtual Samples

4 Free Typesetting

Post-it

®

_{Notes, Die-Cut Notes, Recycled Paper Notes, Executive Style Notes, Angle Note Pads and}

Notes Cubes (pages 3, 6–15, 18–21, 36)

Conditions of Sale, Additional Charges and Product Specifications,

also see general information on page 40.

* No charge for PMS inks except fluorescent,

special mix and metallic. (see page 40)

(3)

Continued from page 41.

Production Time:

• Notes: Fewer than 10,000 pads— Normal production

time is seven (7) working days after receipt of complete

order or after approval of proof. Five (5) working day option on 500–2499 quantity: Standard White paper only.

Standard inks only: Black, Blue, Brown, Burgundy, Green, Teal, Purple or Red. Add 15% for heavy ink coverage. Restrictions on bleeds may apply, call for charges and details. Die-cuts, copy change, custom backsheets, backside imprint, Super Sticky and alternating designs are not available.

• Value Priced Program: Normal production time is five (5) working days after receipt of complete order

or after approval of proof. Special 72-HOUR production

time after receipt of complete order or after approval of proof is available for PD34P-25 note size only at catalog quantities.

• Die-Cut Notes: Fewer than 10,000 pads — Normal

production time is seven (7) working days after receipt of

complete order or after approval of proof. • Super Sticky Notes: Fewer than 10,000 pads —

Normal production time is seven (7) working days after

receipt of complete order or after approval of proof.

• Executive Style Notes: Fewer than 10,000 pads—

• Recycled Paper Notes: Fewer than 10,000 pads—

receipt of complete order or after approval of proof • Angle Note Pads: Normal production time is ten (10)

working days after receipt of complete order or after approval of proof.

• Notes Cubes: Normal production time is seven (7) working days after receipt of complete order or

after approval of proof. Add five (5) working days to

production time for sheet printing. Five (5) working day option (all cube sizes): Side print only, White paper only.

Catalog quantities only. Special 48-HOUR production

time after receipt of complete order or after approval of proof is available on 100–499 quantity of C345 and C690 cube sizes only, 1 or 2 color side printing (same 1 design all sides), White paper only, no sheet imprint.

Proof Charges:

Available on request with order. When a proof is requested, additional production time may be necessary. Call for confirmation of final delivery schedule.

• E-Proof: $8.00 (G). Allow three (3) working days. • Black and White Faxed Proof: $8.00 (G).

Press Production:

To assure customer satisfaction, we recommend a product proof for all 4-color process orders to ensure color expectations. This process takes five (5) working

days to produce — for pricing, call for quote. Otherwise, provide a high quality color print of which is an accurate representation of the color expectations.

• Notes, Recycled Paper, Super Sticky: $145.00 (G) 1 or

2 color, standard or PMS ink. Add $140.00 (G) for Die-cut Notes. Add $70.00 (G) for Angle Notes. All others, call

for quote. Color separations extra.

• Executive Style Notes: $145.00 (G) Stock background +

1 additional standard color or PMS ink. • Notes Cubes: $62.50 (G) Actual side printed cube,

1 color, 1 design, standard or special ink. All others, call for quote. NOTE: For cubes with sheet printed proofs,

see proofs on notes for charges.

Prototypes:

Refer to Speculative Samples on page 40.

Registration:

“Wrap around” registration; color and copy registration is accurate within 1/32" side printed only. This applies when design or copy wraps around notes cube edges.

Restrictions:

• Notes:

– No bleeds on 2" x 3" and 2-3/4" x 3" pads (or smaller).

• Super Sticky Notes:

– White paper only. – No imprint in adhesive area. • Executive Style Notes:

– Super Sticky not available.

– Screened imprint images are not available.

– Standard Green, Teal, Red and Purple inks not available. – For best results use dark, solid imprint. Background

may show through light colored imprint. • Value Priced Program:

– No PMS, fluorescent, special mix or metallic inks. – Restrictions may apply on bleeds, call for charges/details. – White paper only.

– 3" x 4", 4" x 6" or 2-3/4" x 3" size only. – No die-cuts.

– No bleeds on sheet printing.

– White paper only on quantities under 500. (Excludes N400.) – White paper only on CM218, C450, C900, C2100 and C3100

all quantities. – No die-cut shapes. n

Conditions of Sale, Additional Charges and Product Specifications,

also see general information on page 40.

Assortability:

Not Available.

Colors for Standard Items:

• Personal Organizer Paks (OPNMP, OPNMF):

– Cover: White, card stock with protective coating.

– Notes: Standard paper colors — 1" x 3" Neon Pink and

2" x 3" Neon Lime or 3" x 3" Canary Yellow. – Flag colors: Red, Orange, Yellow, Green and Blue. • Mini-Sets with Cover (OPCMP, OPCMF):

– Cover: White card stock with protective coating.

– Flag colors: Red, Orange, Yellow, Green and Blue.

• Note Pad Covers (PC34):

–Cover: White, card stock with protective coating.

–Notes: 3" x 4" Standard White paper

• Lint Sheets Pocket Pack (PCLS):

– Cover: Silver Satin or Beige Stripe design on

card stock with protective coating. – Lint Sheets: White

Copy Change:

Not Available.

Imprint Area:

Visit www.3M.com/templates for printing specifications. No imprint on Executive Covers.

Ink Charges:

No additional charge except fluorescent, special mix and non-standard metallic: $285.00 (G) per color for

all quantities.

Ink Colors:

• Standard Ink Colors for Color Match Printing:

Black Yellow/Process Yellow Purple/PMS 527 Green/PMS 347 Blue/PMS 300 Gold Metallic/PMS 872 Red/PMS 185 Silver Metallic/PMS 877 Brown/PMS 168 Burgundy/PMS 215 Teal/PMS 320

NOTE: PMS number listed next to Standard Color is a very

close representation of standard color. Exact match cannot be guaranteed. Not all colors provide high contrast on all products. Yellow, Gold, Silver not standard for note printing. PMS inks are not available for digital printing. NOTE: Black

ink is recommended for Neon/Ultra color papers.

Less Than Minimum Charges:

Call for quote.

Minimum Order:

• Personal Organizer Paks:

OPNMP-D, OPNMF-D: . . . 100

OPNMP-O, OPNMF-O: . . . 500

Custom Printed Notes: . . . 500

• Mini-Sets with Cover: OPCMP-D, OPCMF-D: . . . 100

OPCMP-O, OPCMF-O: . . . 500

• Note Pad Covers: PC34-D . . . 100

PC34-O . . . 500

• Lint Sheets Pocket Pack (PCLS): . . . 250

Packaging Charges and Requirements:

• Case Quantity/Weights: See individual product pages. • Personal Organizer Paks (OPNMP, OPNMF):

– Protective coating standard on cover. – 25 units per package.

– Individually packaged in poly bag: Available at extra charge—see product price grid.

• Mini-Sets with Cover (OPCMP, OPCMF):

Shrink-wrapped, 25 sets per pack. 10 packs (250 units) per case. • Note Pad Covers (PC34):

– Protective coating standard on cover. – Covers and pads are assembled and packaged.

• Lint Sheets Pocket Pack (PCLS):

– Protective coating standard on cover. – Bulk Packaged.

• Special shrink-wrapping or packaging:

Available at extra charge—call for quote.

Any special packaging requirements must accompany the order to ensure that an accurate delivery schedule can be established. Inserts or labels must arrive at the factory within three (3) working days of a complete order/proof

approval, or the delivery schedule will be affected.

Production Time:

– OPNMP-D, OPNMF-D: Normal production time is five (5) working days after receipt of complete order or after

approval of proof. Add five (5) working days for sheet

printing.

– OPNMP-O, OPNMF-O: Normal production time is eight (8) working days after receipt of complete order or after

printing.

• Mini-Sets with Covers:

– OPCMP-D, OPCMF-D: Normal production time is five (5) working days after receipt of complete order or after

approval of proof.

– OPCMP-O, OPCMF-O: Normal production time is eight (8) working days after receipt of complete order or after

approval of proof.

• Note Pad Covers

– PC34-D: Normal production time is five (5) working

days after receipt of complete order or after approval of proof. Add five (5) working days for sheet printing.

– PC34-O: Normal production time is eight (8) working

days after receipt of complete order or after approval of proof. Add five (5) working days for sheet printing. • Lint Sheets Pocket Pack (PCLS): Normal production

time is five (5) working days after receipt of complete

order or after approval of proof.

Proof Charges:

• E-Proof: $8.00 (G). Allow three (3) working days.

• Black and White Faxed Proof: $8.00 (G).

• Matchprint/Epson: $210.00 (G).

Continued on page 43.

Post-it

®

_{Note Organizers, Mini-Sets with Covers, Lint Sheet Pocket Packs and Note Pad Covers (pages 26–27)}

www.3M.com/templates

(4)

Production Time:

• Notes: Fewer than 10,000 pads— Normal production

time is seven (7) working days after receipt of complete

order or after approval of proof. Five (5) working day option on 500–2499 quantity: Standard White paper only.

Standard inks only: Black, Blue, Brown, Burgundy, Green, Teal, Purple or Red. Add 15% for heavy ink coverage. Restrictions on bleeds may apply, call for charges and details. Die-cuts, copy change, custom backsheets, backside imprint, Super Sticky and alternating designs are not available.

• Value Priced Program: Normal production time is five (5) working days after receipt of complete order

or after approval of proof. Special 72-HOUR production

time after receipt of complete order or after approval of proof is available for PD34P-25 note size only at catalog quantities.

• Die-Cut Notes: Fewer than 10,000 pads — Normal

production time is seven (7) working days after receipt of

complete order or after approval of proof. • Super Sticky Notes: Fewer than 10,000 pads —

• Executive Style Notes: Fewer than 10,000 pads—

• Recycled Paper Notes: Fewer than 10,000 pads—

receipt of complete order or after approval of proof • Angle Note Pads: Normal production time is ten (10)

working days after receipt of complete order or after approval of proof.

• Notes Cubes: Normal production time is seven (7) working days after receipt of complete order or

after approval of proof. Add five (5) working days to

production time for sheet printing. Five (5) working day option (all cube sizes): Side print only, White paper only.

Catalog quantities only. Special 48-HOUR production

time after receipt of complete order or after approval of proof is available on 100–499 quantity of C345 and C690 cube sizes only, 1 or 2 color side printing (same 1 design all sides), White paper only, no sheet imprint.

Proof Charges:

• E-Proof: $8.00 (G). Allow three (3) working days. • Black and White Faxed Proof: $8.00 (G).

Press Production:

• Notes, Recycled Paper, Super Sticky: $145.00 (G) 1 or

2 color, standard or PMS ink. Add $140.00 (G) for Die-cut Notes. Add $70.00 (G) for Angle Notes. All others, call

for quote. Color separations extra.

• Executive Style Notes: $145.00 (G) Stock background +

1 additional standard color or PMS ink. • Notes Cubes: $62.50 (G) Actual side printed cube,

1 color, 1 design, standard or special ink. All others, call for quote. NOTE: For cubes with sheet printed proofs,

see proofs on notes for charges.

Prototypes:

Registration:

“Wrap around” registration; color and copy registration is accurate within 1/32" side printed only. This applies when design or copy wraps around notes cube edges.

Restrictions:

• Notes:

– No bleeds on 2" x 3" and 2-3/4" x 3" pads (or smaller).

• Super Sticky Notes:

– White paper only. – No imprint in adhesive area. • Executive Style Notes:

– Super Sticky not available.

– Screened imprint images are not available.

– Standard Green, Teal, Red and Purple inks not available. – For best results use dark, solid imprint. Background

may show through light colored imprint. • Value Priced Program:

– No PMS, fluorescent, special mix or metallic inks. – Restrictions may apply on bleeds, call for charges/details. – White paper only.

– 3" x 4", 4" x 6" or 2-3/4" x 3" size only. – No die-cuts.

– No bleeds on sheet printing.

– White paper only on quantities under 500. (Excludes N400.) – White paper only on CM218, C450, C900, C2100 and C3100

all quantities. – No die-cut shapes. n

Conditions of Sale, Additional Charges and Product Specifications,

also see general information on page 40.

Assortability:

Not Available.

Colors for Standard Items:

• Personal Organizer Paks (OPNMP, OPNMF):

– Cover: White, card stock with protective coating.

– Notes: Standard paper colors — 1" x 3" Neon Pink and

2" x 3" Neon Lime or 3" x 3" Canary Yellow. – Flag colors: Red, Orange, Yellow, Green and Blue. • Mini-Sets with Cover (OPCMP, OPCMF):

– Cover: White card stock with protective coating.

– Flag colors: Red, Orange, Yellow, Green and Blue.

• Note Pad Covers (PC34):

–Cover: White, card stock with protective coating.

–Notes: 3" x 4" Standard White paper

• Lint Sheets Pocket Pack (PCLS):

– Cover: Silver Satin or Beige Stripe design on

card stock with protective coating. – Lint Sheets: White

Copy Change:

Not Available.

Imprint Area:

Visit www.3M.com/templates for printing specifications. No imprint on Executive Covers.

Ink Charges:

No additional charge except fluorescent, special mix and non-standard metallic: $285.00 (G) per color for

all quantities.

Ink Colors:

• Standard Ink Colors for Color Match Printing:

Black Yellow/Process Yellow Purple/PMS 527 Green/PMS 347 Blue/PMS 300 Gold Metallic/PMS 872 Red/PMS 185 Silver Metallic/PMS 877 Brown/PMS 168 Burgundy/PMS 215 Teal/PMS 320

NOTE: PMS number listed next to Standard Color is a very

close representation of standard color. Exact match cannot be guaranteed. Not all colors provide high contrast on all products. Yellow, Gold, Silver not standard for note printing. PMS inks are not available for digital printing. NOTE: Black

ink is recommended for Neon/Ultra color papers.

Less Than Minimum Charges:

Call for quote.

Minimum Order:

OPNMP-D, OPNMF-D: . . . 100

OPNMP-O, OPNMF-O: . . . 500

• Mini-Sets with Cover: OPCMP-D, OPCMF-D: . . . 100

OPCMP-O, OPCMF-O: . . . 500

• Note Pad Covers: PC34-D . . . 100

PC34-O . . . 500

• Lint Sheets Pocket Pack (PCLS): . . . 250

Packaging Charges and Requirements:

• Case Quantity/Weights: See individual product pages. • Personal Organizer Paks (OPNMP, OPNMF):

– Protective coating standard on cover. – 25 units per package.

– Individually packaged in poly bag: Available at extra charge—see product price grid.

• Mini-Sets with Cover (OPCMP, OPCMF):

Shrink-wrapped, 25 sets per pack. 10 packs (250 units) per case. • Note Pad Covers (PC34):

– Protective coating standard on cover. – Covers and pads are assembled and packaged.

• Lint Sheets Pocket Pack (PCLS):

– Protective coating standard on cover. – Bulk Packaged.

• Special shrink-wrapping or packaging:

Available at extra charge—call for quote.

Any special packaging requirements must accompany the order to ensure that an accurate delivery schedule can be established. Inserts or labels must arrive at the factory within three (3) working days of a complete order/proof

approval, or the delivery schedule will be affected.

Production Time:

– OPNMP-D, OPNMF-D: Normal production time is five (5) working days after receipt of complete order or after

printing.

– OPNMP-O, OPNMF-O: Normal production time is eight (8) working days after receipt of complete order or after

printing.

• Mini-Sets with Covers:

– OPCMP-D, OPCMF-D: Normal production time is five (5) working days after receipt of complete order or after

approval of proof.

– OPCMP-O, OPCMF-O: Normal production time is eight (8) working days after receipt of complete order or after

approval of proof.

• Note Pad Covers

– PC34-D: Normal production time is five (5) working

days after receipt of complete order or after approval of proof. Add five (5) working days for sheet printing.

– PC34-O: Normal production time is eight (8) working

days after receipt of complete order or after approval of proof. Add five (5) working days for sheet printing. • Lint Sheets Pocket Pack (PCLS): Normal production

time is five (5) working days after receipt of complete

order or after approval of proof.

Proof Charges:

• E-Proof: $8.00 (G). Allow three (3) working days.

• Matchprint/Epson: $210.00 (G).

Continued on page 43.

Post-it

®

_{Note Organizers, Mini-Sets with Covers, Lint Sheet Pocket Packs and Note Pad Covers (pages 26–27)}

www.3M.com/templates

(5)

Conditions of Sale, Additional Charges and Product Specifications,

also see general information on page 40.

Press Production:

To assure customer satisfaction, we recommend a product proof for all 4-color process orders to ensure color expectations. This process takes five (5) working days

to produce. Otherwise, provide a high quality color print of which is an accurate representation of the color expectations.

• Personal Organizer Paks, Mini-Sets with Covers, Note Pad Covers:

– Digital Press Proof: $100.00 (G). .

– Offset Press Proof: Call for quote. • Lint Sheets Pocket Packs (PCLS):

$35.00 (G) stock design + 1–2 color, $70.00 (G) stock design + 3–4 color.

Prototypes:

Restrictions:

– No imprint on flags. – No bleeds on notes.

– No PMS, fluorescent, special mix or metallic inks

for digital printing.

• Mini-Sets with Covers: – No imprint on flags

• Note Pad Covers:

• Lint Sheets Pocket Pack: – No imprint on lint sheets. n

Assortability:

Call for details.

Colors for Standard Items:

• Designer 2 Dispensers (TFD2D1, TFD2D2):

– Dispensers: Opaque White plastic or Tinted Clear plastic on White or Bronze card stock back card. Bronze back card available while supplies last. – TFD2D1 Flags: Red, Blue, Green or Yellow only.

One (1) color per dispenser.

– TFD2D2 Flags: Red/Blue duo or Green/Yellow duo.

• Designer Dispenser with Custom Back Card (TFDD1, TFDD4):

– Dispensers: Clear plastic on Black base with Post-it®_{Logo imprint. White card stock back card}

with clear protective coating.

– TFDD1 Flags: Blue, Red, Yellow, Orange, Green, Purple, White. One (1) color per dispenser. – TFDD4 Flags: Red, Blue, Yellow, Green. Four colors

per dispenser. NOTE: Color sequence will vary. • Durable Filing Tabs (TFCFD1, TFCFD2):

– White back card with clear protective coating. – TFCFD1 Tabs: Red tip with White write-on area. – TFCFD2 Tabs: Blue tip with White write-on area and

Red tip with White write-on area. Both colors per pad.

• Flag Pads (TFCF3):

– White back card with clear protective coating. – Flags: Blue, Red, Yellow. All three colors per pad.

• Flag Pod (TFFP): White plastic dispenser.

Copy Change:

Not Available.

Imprint Area:

Ink Charges:

No additional charge for PMS Inks except fluorescent, special mix and non-standard metallic $285.00 (G) per

color. Exact match to PMS ink color cannot be guaranteed.

NOTE: PMS inks not available for all products.

Ink Colors:

• Designer 2 Dispensers (TFD2D1, TFD2D2), Flag Pod (TFFP), Flag Pad (TFCF3) and Durable Filing Tabs (TFCFD1, TFCFD2):

Black Yellow/Process Yellow Purple/PMS 527 Green/PMS 347 Blue/PMS 300 Gold Metallic/PMS 872 Red/PMS 185 Silver Metallic/PMS 877 Brown/PMS 168 Burgundy/PMS 215 Teal/PMS 320 White

very close representation of standard color. Exact match to PMS Inks cannot be guaranteed. Not all colors provide high contrast on all dispensers.

• Designer Dispenser with Custom Back Card (TFDD1, TFDD4): Products are digitally printed. All PMS

inks will be converted for digital printing. Exact match to PMS ink color cannot be guaranteed. No fluorescent, special mix or metallic inks.

Minimum Order:

• Designer 2 Dispensers (TFD2D1, TFD2D2): ...250

• Designer Dispensers with Custom Back Card (TFDD1, TFDD4): ...500

• Durable Filing Tabs (TFCFD1, TFCFD2): ...250

• Flag Pads (TFCF3): ...250

• Flag Pods (TFFP): ...100

Packaging Charges and Requirements:

• Case Quantity/Weights: See individual product pages. • Designer 2 Dispensers (TFD2D1, TFD2D2): 25 units per

pack. 250 units per case.

• Designer Dispensers with Custom Back Cards (TFDD1, TFDD4): Bulk packaged.

• Durable Filing Tabs (TFCFD1, TFCFD2): Bulk packaged • Flag Pads (TFCF3): Bulk packaged.

• Flag Pod (TFFP): Bulk packaged.

• Special Packaging Requirements:

Special Shrink-wrapping or Packaging: Available at extra charge — call for quote. Any special packaging requirements must accompany the order to ensure that an accurate delivery schedule can be established. Inserts or labels must arrive at the factory within three (3) working

Plates, Screens and Set-up Charges:

No charge.

Production Time:

• Designer 2 Dispensers (TFD2D1, TFD2D2): Normal

production time is five (5) working days after receipt of

complete order or approval of proof.

• Designer Dispensers with Custom Back Cards (TFDD1, TFDD4): Normal production time is eight (8)

working days after receipt of complete order or approval of proof.

• Durable Filing Tabs (TFCFD1, TFCFD2): Normal

• Flag Pads (TFCF3): Normal production time is five (5)

• Flag Pod (TFFP): Normal production time is five (5)

Proof Charges:

• E-Proof: $8.00 (G). Allow three (3) working days.

Press Production:

days to produce. Otherwise, provide a high quality color print of which is an accurate representation of the color expectations.

• Designer Dispensers with Custom Back Cards (TFDD1, TFDD4): $145.00 (G) 1–4 color

• Designer 2 Dispensers (TFD2D1, TFD2D2), Flag Pod (TFFP), Flag Pad (TFCF3) and Durable Filing Tabs (TFCFD1, TFCFD2): $35.00 (G) 1–2 color, $70.00 (G) 3–4 color

Prototypes:

Restrictions:

• Designer Dispensers with Custom Back Cards (TFDD1, TFDD4):

– All PMS inks will be converted for digital printing.

Exact match to PMS ink color cannot be guaranteed. – No fluorescent, special mix or metallic inks.

– No imprint on flags.

• Designer 2 Dispensers (TFD2D2):

– No Imprint on flags.

• Durable Filing Tabs (TFCFD1, TFCFD2):

– No Imprint on tabs.

– No bleeds on back card.

• Flag Pads (TFCF3):

– No Imprint on flags.

– No bleeds on back card. n

Post-it

®

_{Flag Dispensers, Durable Tabs, Flag Pads and Flag Pods}

(pages 24–25)

Full-featured templates

to help ensure your

3M Promotional

Product meets your

design expectations.

www.3M.com/templates

FREE!

www.3M.com/ndl

43

(6)

Conditions of Sale, Additional Charges and Product Specifications,

also see general information on page 40.

Press Production:

To assure customer satisfaction, we recommend a product proof for all 4-color process orders to ensure color expectations. This process takes five (5) working days

to produce. Otherwise, provide a high quality color print of which is an accurate representation of the color expectations.

• Personal Organizer Paks, Mini-Sets with Covers, Note Pad Covers:

– Digital Press Proof: $100.00 (G). .

– Offset Press Proof: Call for quote. • Lint Sheets Pocket Packs (PCLS):

$35.00 (G) stock design + 1–2 color, $70.00 (G) stock design + 3–4 color.

Prototypes:

Restrictions:

– No imprint on flags. – No bleeds on notes.

• Mini-Sets with Covers: – No imprint on flags

• Note Pad Covers:

• Lint Sheets Pocket Pack: – No imprint on lint sheets. n

Assortability:

Call for details.

Colors for Standard Items:

• Designer 2 Dispensers (TFD2D1, TFD2D2):

– Dispensers: Opaque White plastic or Tinted Clear plastic on White or Bronze card stock back card. Bronze back card available while supplies last. – TFD2D1 Flags: Red, Blue, Green or Yellow only.

One (1) color per dispenser.

– TFD2D2 Flags: Red/Blue duo or Green/Yellow duo.

• Designer Dispenser with Custom Back Card (TFDD1, TFDD4):

– Dispensers: Clear plastic on Black base with Post-it®_{Logo imprint. White card stock back card}

with clear protective coating.

– TFDD1 Flags: Blue, Red, Yellow, Orange, Green, Purple, White. One (1) color per dispenser. – TFDD4 Flags: Red, Blue, Yellow, Green. Four colors

per dispenser. NOTE: Color sequence will vary. • Durable Filing Tabs (TFCFD1, TFCFD2):

– White back card with clear protective coating. – TFCFD1 Tabs: Red tip with White write-on area. – TFCFD2 Tabs: Blue tip with White write-on area and

Red tip with White write-on area. Both colors per pad.

• Flag Pads (TFCF3):

– White back card with clear protective coating. – Flags: Blue, Red, Yellow. All three colors per pad.

• Flag Pod (TFFP): White plastic dispenser.

Copy Change:

Not Available.

Imprint Area:

Ink Charges:

No additional charge for PMS Inks except fluorescent, special mix and non-standard metallic $285.00 (G) per

color. Exact match to PMS ink color cannot be guaranteed.

NOTE: PMS inks not available for all products.

Ink Colors:

• Designer 2 Dispensers (TFD2D1, TFD2D2), Flag Pod (TFFP), Flag Pad (TFCF3) and Durable Filing Tabs (TFCFD1, TFCFD2):

very close representation of standard color. Exact match to PMS Inks cannot be guaranteed. Not all colors provide high contrast on all dispensers.

• Designer Dispenser with Custom Back Card (TFDD1, TFDD4): Products are digitally printed. All PMS

inks will be converted for digital printing. Exact match to PMS ink color cannot be guaranteed. No fluorescent, special mix or metallic inks.

Minimum Order:

• Designer 2 Dispensers (TFD2D1, TFD2D2): ...250

• Designer Dispensers with Custom Back Card (TFDD1, TFDD4): ...500

• Durable Filing Tabs (TFCFD1, TFCFD2): ...250

• Flag Pads (TFCF3): ...250

• Flag Pods (TFFP): ...100

Packaging Charges and Requirements:

• Case Quantity/Weights: See individual product pages. • Designer 2 Dispensers (TFD2D1, TFD2D2): 25 units per

pack. 250 units per case.

• Designer Dispensers with Custom Back Cards (TFDD1, TFDD4): Bulk packaged.

• Durable Filing Tabs (TFCFD1, TFCFD2): Bulk packaged • Flag Pads (TFCF3): Bulk packaged.

• Flag Pod (TFFP): Bulk packaged.

Special Shrink-wrapping or Packaging: Available at extra charge — call for quote. Any special packaging requirements must accompany the order to ensure that an accurate delivery schedule can be established. Inserts or labels must arrive at the factory within three (3) working

Plates, Screens and Set-up Charges:

No charge.

Production Time:

• Designer 2 Dispensers (TFD2D1, TFD2D2): Normal

• Designer Dispensers with Custom Back Cards (TFDD1, TFDD4): Normal production time is eight (8)

• Durable Filing Tabs (TFCFD1, TFCFD2): Normal

• Flag Pads (TFCF3): Normal production time is five (5)

• Flag Pod (TFFP): Normal production time is five (5)

Proof Charges:

• E-Proof: $8.00 (G). Allow three (3) working days.

Press Production:

days to produce. Otherwise, provide a high quality color print of which is an accurate representation of the color expectations.

• Designer Dispensers with Custom Back Cards (TFDD1, TFDD4): $145.00 (G) 1–4 color

• Designer 2 Dispensers (TFD2D1, TFD2D2), Flag Pod (TFFP), Flag Pad (TFCF3) and Durable Filing Tabs (TFCFD1, TFCFD2): $35.00 (G) 1–2 color, $70.00 (G) 3–4 color

Prototypes:

Restrictions:

• Designer Dispensers with Custom Back Cards (TFDD1, TFDD4):

– All PMS inks will be converted for digital printing.

Exact match to PMS ink color cannot be guaranteed. – No fluorescent, special mix or metallic inks.

– No imprint on flags.

• Designer 2 Dispensers (TFD2D2):

– No Imprint on flags.

• Durable Filing Tabs (TFCFD1, TFCFD2):

– No Imprint on tabs.

– No bleeds on back card.

• Flag Pads (TFCF3):

– No Imprint on flags.

– No bleeds on back card. n

Post-it

®

_{Flag Dispensers, Durable Tabs, Flag Pads and Flag Pods}

(pages 24–25)

Full-featured templates

to help ensure your

3M Promotional

Product meets your

design expectations.

www.3M.com/templates

FREE!

www.3M.com/ndl

43

(7)

Conditions of Sale, Additional Charges and Product Specifications,

also see general information on page 40.

Assortability:

• Flag Pens and Flag Highlighters (WIPFC, WIHFC, WIPFCPIR) and Flag, Pen and Highlighter Combos (WIPHFC):

Available with the following restrictions: – Artwork must be exactly the same on both pieces.

(Remember to consider barrel color of both pieces when choosing an ink color.) Ink change charge, call for quote.

– Artwork position must be exactly the same on both pieces. NOTE: Order does not have to be 50/50. For

example, 1000 total pieces may include 250 pens and 750 highlighters.

– Flag, Pen and Highlighter Combos (WIPHFC) cannot be assorted with Flag Pens and Flag Highlighters. • Flag Permanent Marker (WIMFC): Not available.

Colors for Standard Items:

• Flag Pen Options (WIPFC):

1) Black barrel with Black grip, Black ink cartridge, Red flags.

2) White barrel with Black grip, Black ink cartridge, Red flags.

3) White barrel with Blue grip, Blue ink cartridge, Red flags

4) White barrel with Pink grip, Black ink cartridge, Pink flags, Pink Ribbon pre-printed on barrel. 5) Silver barrel with Black grip, Black ink cartridge,

Red flags.

• Flag Highlighter Options (WIHFC):

1) Yellow barrel (imprint area is translucent Yellow); Fluorescent Yellow pigment; Red flags. 2) White barrel (Imprint area is Opaque White);

Fluorescent Yellow pigment; Yellow flags 3) Green barrel (imprint area is translucent Green);

Fluorescent Green pigment, Green flags. 4) Pink barrel (imprint area is translucent Pink);

Fluorescent Pink pigment, Pink flags. 5) Blue barrel (imprint area is translucent Blue);

Fluorescent Blue pigment, Blue flags.

6) Orange barrel (imprint area is translucent Orange); Fluorescent Orange pigment, Orange flags. • Lanyards for WIPFC and WIHFC (WILANYARD):

All have clear clips.

Cord Colors: Black, White, Blue or Yellow • Flag, Pen and Highlighter Combo (WIPHFC):

1) White barrel; Fluorescent Yellow highlighter; Yellow flags, Black ink pen; Opaque White caps. 2) White barrel; Fluorescent Yellow highlighter; Yellow

flags, Black ink pen; Translucent Yellow Glitter caps. 3) White barrel; Fluorescent Green highlighter; Green flags, Black ink pen; Translucent Green Glitter caps. 4) White barrel; Fluorescent Blue highlighter; Blue flags,

Black ink pen; Translucent Blue Glitter caps. • Lanyard for WIPHFC: (WILANYARDC)

Clear clip with White cord.

• Flag Permanent Marker (WIMFC):

White barrel with Black grip ; White flags, permanent Black ink marker.

• SIGN HERE Flags (PREMFL, WIREFILL):

Red 3/8" flags with Black SIGN HERE imprint. No custom imprint on flags. Not available for WIPHFC or WIMFC. – Add 35¢ (G) all quantities (PREMFL). Replaces

standard flags in Flag Pen or Flag Highlighter. – Add 52¢ (G) all quantities for refill (WIREFILL).

Flag Pen or Flag Highlighter is packaged with one set of SIGN HERE refill flags.

Colors for Standard Items (cont.):

• Custom Flag and Barrel Colors:

Available only for WIPFC, WIPHC, WIPFCPIR and WIPHFC at quantities at 25,000 units. Call for quote. Not available for WIMFC.

Copy Change:

Not Available.

Imprint Area:

Ink Charges:

No charge for PMS Inks except for fluorescent, special mix and non-standard metallic: $285.00 (G) per color for all

quantities. Exact color match cannot be guaranteed.

Ink Colors:

• Popular Standard Imprint Inks:

very close representation of standard color. Exact match cannot be guaranteed. Not all colors provide high contrast on all barrel colors.

Minimum Order:

• Flag Pen (WIPFC, WIPFCPIR): ... 100 units

• Flag Highlighter (WIHFC): ... 100 units

• Lanyards (WILANYARD, WILANYARDC): ... 100 units

• SIGN HERE Flags (PREMFL): ... 100 units

• Flag, Pen and Highlighter Combo

(WIPHFC): ... 100 units

• Flag Permanent Marker (WIMFC): ... 100 units

Packaging Charges and Requirements:

• Flag Pens and Flag Highlighters (WIPFC,

WIHFC, WIPFCPIR):

– Individually wrapped in unsealed, clear plastic sleeve. Bulk packaged 500 units/case.

– with Flag Refill (WIREFILL): Individually sealed in clear

plastic sleeve with refill instructions. Bulk packaged 500 units/case.

• Flag, Pen and Highlighter Combo (WIPHFC):

Individually wrapped in unsealed, clear plastic sleeve. Bulk packaged 500 units/case.

• Flag Permanent Marker (WIMFC):

Individually wrapped in unsealed, clear plastic sleeve. Bulk packaged 500 units/case.

Special Shrink-wrapping or Packaging: Available at extra charge — call for quote. Any special packaging requirements must accompany the order to ensure that an accurate delivery schedule can be established. Inserts or labels must arrive at the factory within

three (3) working days of a complete

order/proof approval, or the delivery schedule will be affected.

Plates, Screens and Set-up Charges:

No charge.

Production Time:

Normal production time is five (5) working days after

receipt of complete order or approval of proof. Add two (2)

working days for Post-it®_{SIGN HERE Flags (not available for}

WIPHFC or WIMFC).

Proof Charges:

• E-Proof: $8.00 (G). Allow three (3) working days. • Black and White Faxed Proof: $8.00 (G).

Press Production:

• Press Proof 1 or 2 color: $35.00 (G) each.

Prototypes:

Refills for Flags:

50 standard or SIGN HERE flag refill available with accompanying order: add $0.52 (G) to quantity price per

unit. Comes packaged together with instruction card and flag writing instrument in clear plastic sleeve. Refills not sold separately. SIGN HERE flag refill not available for WIPHFC or WIMFC.

Restrictions:

• All flag pens (WIPFC, WIPFCPIR), flag highlighters (WIHFC) and flag markers (WIMFC) will have the Post-it®_logo

pre-printed on the barrel.

• If custom imprint is in both upper and lower case, minimum size for type is 8 point. If imprint is only in upper case, minimum type size is 6 point.

• Second imprint area on barrel, excludes White barrel pen with Pink ribbon (WIPFCPIR). Quantity limitations apply. Call for details. Not available for WIPHFC or WIMFC.

• No imprint on lanyards. Lanyards NOT sold separately. • No imprint on flags.

• SIGN HERE flags not available for WIPHFC or WIMFC. • Standard flag and SIGN HERE flag refills NOT sold

separately. SIGN HERE flag refill not available for WIPHFC or WIMFC.

• Pen ink, permanent marker ink and highlighter pigment cartridges are not refillable. n