• No results found

4g To3g Handover

N/A
N/A
Protected

Academic year: 2021

Share "4g To3g Handover"

Copied!
8
0
0

Loading.... (view fulltext now)

Full text

(1)

eUTRAN to UTRAN Iu mode Inter

eUTRAN to UTRAN Iu mode Inter

RA

RAT h

T handover

andover

General information

General information

Pre-conditions:

Pre-conditions: 

 The UE is in ECM-CONNECTED state (E-UTRAN mode).The UE is in ECM-CONNECTED state (E-UTRAN mode).

If emerenc! "earer ser#ices are onoin for an UE$ hando#er to the taret RNC is %erformed If emerenc! "earer ser#ices are onoin for an UE$ hando#er to the taret RNC is %erformed inde%endent of the &ando#er Restriction 'ist. The N chec*s$ as %art of the Ro+tin Area inde%endent of the &ando#er Restriction 'ist. The N chec*s$ as %art of the Ro+tin Area U%date in the e,ec+tion %hase$ if the hando#er is to a restricted area and if so N deacti#ate U%date in the e,ec+tion %hase$ if the hando#er is to a restricted area and if so N deacti#ate the non-emerenc! PDP conte,t.

the non-emerenc! PDP conte,t.

Preparation phase

Preparation phase

i. . E-UTRAN to

i. . E-UTRAN to UTRAN I+ mode Inter UTRAN I+ mode Inter RARAT &O %re%aration %hase.T &O %re%aration %hase.

Step 1.

Step 1. The so+rce eNode/ The so+rce eNode/ decides to initiate an decides to initiate an Inter-RAInter-RAT hando#er to T hando#er to the taret accessthe taret access

net0or*$ UTRAN I+ mode.

net0or*$ UTRAN I+ mode. At this %oint "oth +%1in* and do0n1in* +ser data is transmitted #ia At this %oint "oth +%1in* and do0n1in* +ser data is transmitted #ia the fo11o0in: /earer(s) "et0een UE and so+rce eNode/$

the fo11o0in: /earer(s) "et0een UE and so+rce eNode/$ TP t+nne1(s) "et0een so+rceTP t+nne1(s) "et0een so+rce eNode/$ er#in 2 and

(2)

If the UE has an onoin emerenc! "earer ser#ice the so+rce eNode/ sha11 not initiate P hando#er to a UTRAN ce11 that is not IM #oice ca%a"1e.

te% 3. The so+rce eNode/ sends a &ando#er Re4+ired (AP Ca+se$ Taret RNC Identifier$ C ID$ C access mode$ o+rce eNode/ Identifier$ o+rce to Taret Trans%arent Container) messae to the so+rce MME to re4+est the CN to esta"1ish reso+rces in the taret RNC$ taret N and the er#in 2. The "earers that 0i11 "e s+"5ect to data for0ardin (if an!) are identified "! the taret N in a 1ater ste% (see step 7 "e1o0). 2hen the taret ce11 is a C ce11 or a h!"rid ce11$ the so+rce eNode/ sha11 inc1+de the C ID of the taret ce11. If the taret ce11 is a h!"rid ce11$ the C access mode sha11 "e indicated.

Step 3. The so+rce MME determines from the 6Taret RNC Identifier6 IE that the t!%e of hando#er is IRAT &ando#er to UTRAN I+ mode. The o+rce MME initiates the &ando#er reso+rce a11ocation %roced+re "! sendin a or0ard Re1ocation Re4+est (IMI$ Taret

Identification$ C ID$ C Mem"ershi% Indication$ MM Conte,t$ PDN Connections$ MME T+nne1 End%oint Identifier for Contro1 P1ane$ MME Address for Contro1 %1ane$ o+rce to Taret Trans%arent Container$ RAN Ca+se$ M Info Chane Re%ortin Action (if a#ai1a"1e)$ C Information Re%ortin Action (if a#ai1a"1e)$ UE Time 7one$ IR +%%orted) messae to the taret N. The information IR +%%orted is indicated if the so+rce MME and associated er#in 2 are ca%a"1e to acti#ate IR for the UE. 2hen IR is acti#ated the messae sho+1d  "e sent to the N that maintains IR for the UE 0hen this N is ser#in the taret

identified "! the Taret Identification. This messae inc1+des a11 PDN Connections acti#e in the so+rce s!stem and for each PDN Connection inc1+des the associated APN$ the address and the +%1in* T+nne1 end%oint %arameters of the er#in 2 for contro1 %1ane$ and a 1ist of EP /earer  Conte,ts. RAN Ca+se indicates the AP Ca+se as recei#ed from so+rce eNode/.

The so+rce MME sha11 %erform access contro1 "! che c*in the UE6s C s+"scri%tion 0hen C ID is %ro#ided "! the so+rce eNode/. If there is no s+"scri%tion data for this C ID or the C s+"scri%tion is e,%ired$ and the taret ce11 is a C ce11$ the so+rce MME sha11 re5ect the hando#er 0ith an a%%ro%riate ca+se.

The so+rce MME inc1+des the C ID in the or0ard Re1ocation Re4+est 0hen the taret ce11 is a C ce11 or h!"rid ce11. 2hen the taret ce11 is a h!"rid ce11$ the C Mem"ershi% Indication indicatin 0hether the UE is a C mem"er sha11 "e inc1+ded in the or0ard Re1ocation

Re4+est messae.

The taret N ma%s the EP "earers to PDP conte,ts -to- and ma%s the EP /earer 8o  %arameter #a1+es of an EP "earer to the Re1ease 99 8o %arameter #a1+es of a "earer conte,t.

Prioritiation of PDP Conte,ts is %erformed "! the taret core net0or* node$ i.e. taret N. The MM conte,t contains sec+rit! re1ated information$ e.. s+%% orted ci%herin a1orithms

The taret N sha11 determine the Ma,im+m APN restriction "ased on the APN Restriction of  each "earer conte,t in the or0ard Re1ocation Re4+est$ and sha11 s+"se4+ent1! store the ne0 Ma,im+m APN restriction #a1+e.

Step 4. The taret N determines if the er#in 2 is to "e re1ocated$ e. .$ d+e to P'MN chane. If the er#in 2 is to "e re1ocated$ the taret N se1ects the taret er#in 2$ and sends a Create ession Re4+est messae (IMI$ N T+nne1 End%oint Identifier for Contro1 P1ane$ N Address for Contro1 %1ane$ PDN 2 address(es) for +ser %1ane$ PDN 2 U' TEID(s) for +ser %1ane$ PDN 2 address(es) for contro1 %1ane$ and PDN 2 TEID(s) for

contro1 %1ane$ the Protoco1 T!%e o#er ;<=$ er#in Net0or*) %er PDN connection to the taret er#in 2. The Protoco1 T!%e o#er ;<= is %ro#ided to er#in 2 0hich %rotoco1 sho+1d "e +sed o#er ;<= interface.

(3)

The taret N esta"1ishes the EP /earer conte,t(s) in the indicated order. The N

deacti#ates$ as %ro#ided instep 7 of the e,ec+tion %hase$ the EP /earer conte,ts 0hich cannot  "e esta"1ished.

Step 4a. The taret er#in 2 a11ocates its 1oca1 reso+rces and ret+rns a Create ession Res%onse (er#in 2 address(es) for +ser %1ane$ er#in 2 U' TEID(s) for +ser %1ane$ er#in 2 Address for contro1 %1ane$ er#in 2 TEID for contro1 %1ane) messae to the taret N.

Step 5. The taret N re4+ests the taret RNC to esta"1ish the radio net0or* reso+rces (RA/s) "! sendin the messae Re1ocation Re4+est (UE Identifier$ Ca+se$ CN Domain

Indicator$ Interit! %rotection information (i.e. I> and a11o0ed Interit! Protection a1orithms)$ Encr!%tion information (i.e. C> and a11o0ed Ci%herin a1orithms)$ RA/ (Radio Access /earer) to "e set+% 1ist$ C ID$ C Mem"ershi% Indication$ o+rce RNC to Taret RNC Trans%arent Container$ er#ice &ando#er re1ated information). If the Access Restriction is %resent in the MM conte,t$ the er#ice &ando#er re1ated information sha11 "e inc1+ded "! the taret N for the Re1ocation Re4+est messae in order for RNC to restrict the UE in connected mode to hando#er to the RAT %rohi"ited "! the Access Restriction.

or each RA/ re4+ested to "e esta"1ished$ RA/s To /e et+% sha11 contain information s+ch as RA/ ID$ RA/ %arameters$ Trans%ort 'a!er Address$ and I+ Trans%ort Association. The RA/ ID information e1ement contains the NAPI #a1+e$ and the RA/ %arameters information e1ement i#es the 8o %rofi1e. The Trans%ort 'a!er Address is the er#in 2 Address for +ser %1ane (if  Direct T+nne1 is +sed) or the N Address for +ser %1an e (if Direct T+nne1 is not +sed)$ and the I+ Trans%ort Association corres%onds to the +%1in* T+nne1 End%oint Identifier Data in er#in 2 or N res%ecti#e1!.

Ci%herin and interit! %rotection *e!s are sent to the taret RNC to a11o0 data transfer to

contin+e in the ne0 RAT<mode taret ce11 0itho+t re4+irin a ne0 A>A (A+thentication and >e! Areement) %roced+re. Information that is re4+ired to "e sent to the UE (either in the Re1ocation Command messae or after the hando#er com%1etion messae) from RRC in the taret RNC sha11 "e inc1+ded in the RRC messae sent from the taret RNC to the UE #ia the trans%arent container .

The Taret N sha11 inc1+de the C ID and C Mem"ershi% Indication 0hen %ro#ided "! the so+rce MME in the or0ard Re1ocation Re4+est messae.

In the taret RNC radio and I+ +ser %1ane reso+rces are reser#ed for the acce%ted RA/s. Ca+se indicates the RAN Ca+se as recei#ed from so+rce MME. The o+rce RNC to Taret RNC Trans%arent Container inc1+des the #a1+e from the o+rce to Taret Trans%arent Container recei#ed from the so+rce eNode/.

If the taret ce11 is a C ce11$ the taret RNC sha11 #erif! the C ID %ro#ided "! the taret N$ and re5ect the hando#er 0ith an a%%ro%riate ca+se if it does not match the C ID for the taret ce11. If the taret ce11 is in h!"rid mode$ the taret RNC ma! +se the C Mem"ershi% Indication to %erform differentiated treatment for C and non-C mem"ers.

Step 5a. The taret RNC a11ocates the reso+rces and ret+rns the a%%1ica"1e %arameters to the taret N in the messae Re1ocation Re4+est Ac*no01ede (Taret RNC to o+rce RNC Trans%arent Container$ RA/s set+% 1ist$ RA/s fai1ed to set+% 1ist).

U%on sendin the Re1ocation Re4+est Ac*no01ede messae the taret RNC sha11 "e %re%ared to recei#e do0n1in* TP PDUs from the er#in 2$ or Taret N if Direct T+nne1 is not +sed$ for the acce%ted RA/s.

(4)

for +ser data$ and the I+ Trans%ort Association$ 0hich corres%onds to the do0n1in* T+nne1 End%oint Identifier for +ser data.

An! EP /earer conte,ts for 0hich a RA/ 0as not esta"1ished are maintained in the taret N and the UE. These EP /earer conte,ts sha11 "e deacti#ated "! the taret N #ia e,%1icit M %roced+res +%on the com%1etion of the ro+tin area +%date (RAU) %roced+re.

Step 6. If 6Indirect or0ardin6 and re1ocation of er#in 2 a%%1! and Direct T+nne1 is +sed the taret N sends a Create Indirect Data or0ardin T+nne1 Re4+est messae (Taret RNC Address and TEID(s) for D' data for0ardin) to the er#in 2. If 6Indirect or0ardin6 and re1ocation of er#in 2 a%%1! and Direct T+nne1 is not +sed$ then the taret NN Address and TEID(s) for D' data for0ardin) to the er#in 2.

Indirect for0ardin ma! "e %erformed #ia a er#in 2 0hich is different from the er#in 2 +sed as the anchor %oint for the UE.

Step 6a. The er#in 2 ret+rns a Create Indirect Data or0ardin T+nne1 Res%onse (Ca+se$ er#in 2 Address(es) and er#in 2 D' TEID(s) for data for0ardin) messae to the taret N.

Step 7. The taret N sends the messae or0ard Re1ocation Res%onse (Ca+se$ N T+nne1 End%oint Identifier for Contro1 P1ane$ N Address for Contro1 P1ane$ Taret to o+rce

Trans%arent Container$ Ca+se$ RA/ et+% Information$ Additiona1 RA/ et+% Information$ Address(es) and TEID(s) for User Traffic Data or0ardin$ er#in 2 chane indication) to the so+rce MME. er#in 2 chane indication indicates a ne0 er#in 2 has "een se1ected. The Taret to o+rce Trans%arent Container contains the #a1+e from the Taret RNC to o+rce RNC Trans%arent Container recei#ed from the taret RNC.

The IE 6Address(es) and TEID(s) for User Traffic Data or0ardin6 defines the destination t+nne11in end%oint for data for0ardin in taret s!stem$ and it is set as fo11o0s:

 If 6Direct or0ardin6 a%%1ies$ or if 6Indirect or0ardin6 and no re1ocation of er#in 2 a%%1! and Direct T+nne1 is +sed$ then the IE 6Address(es) and TEID(s) for User Traffic Data or0ardin6 contains the addresses and TP-U t+nne1 end%oint %arameters to the Taret RNC recei#ed instep 5a.

 If 6Indirect or0ardin6 and re1ocation of er#in 2 a%%1!$ then the IE 6Address(es) and TEID(s) for User Traffic Data or0ardin6 contains the addresses and D' TP-U t+nne1 end%oint %arameters to the er#in 2 recei#ed in ste% ?. This is inde%endent from +sin Direct T+nne1 or not.

 If 6Indirect or0ardin6 a%%1ies and Direct T+nne1 is not +sed and re1ocation of er#in 2 does not a%%1!$ then the IE 6Address(es) and TEID(s) for User Traffic Data

or0ardin6 contains the D' TP-U t+nne1 end%oint %arameters to the Taret N.

Step 8. If @Indirect or0ardin@ a%%1ies$ the o+rce MME sends the messae Create Indirect Data or0ardin T+nne1 Re4+est (Address(es) and TEID(s) for Data or0ardin (recei#ed in

step 7))$ EP /earer ID(s)) to the er#in 2 +sed for indirect for0ardin.

Indirect for0ardin ma! "e %erformed #ia a er#in 2 0hich is different from the er#in 2 +sed as the anchor %oint for the UE.

Step 8a. The Serving 2 returns the forwarding parameters by sending the message Create Indirect Data Forwarding Tunnel Response (Cause, Serving

(5)

2 ddress(es! and TEID(s! for Data Forwarding!" If the Serving 2 doesn#t support data forwarding, an appropriate cause value shall be returned and the Serving 2 ddress(es! and TEID(s! will not be included in the message"

(6)

i. 3. E-UTRAN to UTRAN I+ mode Inter RAT &O e,ec+tion %hase. The so+rce eNode/ contin+es to recei#e do0n1in* and +%1in* +ser %1ane PDUs.

Step 1. The so+rce MME com%1etes the %re%aration %hase to0ards so+rce eNode/ "! sendin the messae &ando#er Command (Taret to o+rce Trans%arent Container$ E-RA/s to Re1ease 'ist$ /earers +"5ect to Data or0ardin 'ist). The @/earers +"5ect to Data for0ardin 1ist@ IE ma! "e inc1+ded in the messae and it sha11 "e a 1ist of 6Address(es) and TEID(s) for +ser traffic data for0ardin6 recei#ed from taret side in the %re%aration %hase (Step 7 of the %re%aration  %hase) 0hen 6Direct or0ardin6 a%%1ies$ or the %arameters recei#ed in te% =a of the %re%aration  %hase 0hen 6Indirect or0ardin6 a%%1ies.

The so+rce eNode/ initiates data for0ardin for "earers s%ecified in the @/earers +"5ect to Data or0ardin 'ist@. The data for0ardin ma! o direct1! to taret RNC or a1ternati#e1! o #ia the er#in 2 if so decided "! so+rce MME and or< taret N in the %re%aration %h ase.

Step 2. The so+rce eNode/ 0i11 i#e a command to the UE to hando#er to the taret access net0or* #ia the messae &O from E-UTRAN Command. This messae inc1+des a trans%arent container inc1+din radio as%ect %arameters that the taret RNC has set-+% in the %re%aration  %hase.

U%on the rece%tion of the &O from E-UTRAN Command messae containin the &ando#er Command messae$ the UE sha11 associate its "earer IDs to the res%ecti#e RA/s "ased on the re1ation 0ith the NAPI and sha11 s+s%end the +%1in* transmission of the +ser %1ane data.

Step 3. oid.

Step 4. The UE mo#es to the taret UTRAN I+ (B) s!stem and e ,ec+tes the hando#er

accordin to the %arameters %ro#ided in the messae de1i#ered in step 2. The %roced+re is the same as in step 6 and8,0ith the additiona1 f+nction of association of the recei#ed RA/s and e,istin /earer Id re1ated to the %artic+1ar NAPI.

The UE ma! res+me the +ser data transfer on1! for those NAPIs for 0hich there are radio reso+rces a11ocated in the taret RNC.

The UE 1oca11! deacti#ates IR "! settin its TIN from @RAT-re1ated TMI@ to @UTI@$ if an! EP "earer conte,t acti#ated after the IR 0as acti#ated in the UE e,ists.

Step 5. 2hen the ne0 so+rce RNC-ID  -RNTI are s+ccessf+11! e,chaned 0ith the UE$ the taret RNC sha11 send the Re1ocation Com%1ete messae to the taret N. The %+r%ose of the Re1ocation Com%1ete %roced+re is to indicate "! the taret RNC the com%1etion of the re1ocation from the so+rce E-UTRAN to the RNC. After the rece%tion of the Re1ocation Com%1ete messae the taret N sha11 "e %re%ared to recei#e data from the taret RNC. Each +%1in* N-PDU recei#ed "! the taret N is for0arded direct1! to the er#in 2.

Step 6. Then the taret N *no0s that the UE has arri#ed to the taret side and taret N informs the so+rce MME "! sendin the or0ard Re1ocation Com%1ete Notification (IR

Acti#ated$ er#in 2 chane) messae. If indicated$ IR Acti#ated indicates to the so+rce MME that it sha11 maintain the UE6s conte,t and tha t it sha11 acti#ate IR$ 0hich is on1! %ossi"1e 0hen the  2 is not chaned. The so+rce MME 0i11 a1so ac*no01ede that information. A timer in so+rce MME is started to s+%er#ise 0hen reso+rces in o+rce eNode/ and o+rce er#in 2 (for er#in 2 re1ocation) sha11 "e re1eased.

(7)

2hen the timer e,%ires and IR Acti#ated is not indicated "! the taret N the so+rce MME re1eases a11 "earer reso+rces of the UE. If er#in 2 chane is indicated and this timer e,%ires the so+rce MME de1etes the EP "earer reso+rces "! sendin De1ete ession Re4+est (Ca+se) messaes to the o+rce er#in 2. Ca+se indicates to the o+rce er#in 2 that the er#in 2 chanes and the o+rce er#in 2 sha11 not initiate a de1ete %roced+re to0ards the PDN 2. If er#in 2 chane is indicated and has "een acti#ated "efore this %roced+re$ the ca+se a1so indicates to the o+rce  2 that the o+rce  2 sha11 de1ete the "earer reso+rces on the other o1d CN node "! sendin De1ete /earer Re4+est messae(s) to that CN nod e.

U%on recei%t of the or0ard Re1ocation Com%1ete Ac*no01ede messae the taret N starts a timer if the taret N a11ocated  2 reso+rces for indirect for0ardin.

Step 7. The taret N 0i11 no0 com%1ete the &ando#er %roced+re "! informin the er#in 2 (for er#in 2 re1ocation this 0i11 "e the Taret er#in 2) that the taret N is no0 res%onsi"1e for a11 the EP /earer Conte,ts the UE has esta"1ished. This is %erformed in the

messae Modif! /earer Re4+est (N T+nne1 End%oint Identifier for Contro1 P1ane$ NAPI(s)$ N Address for Contro1 P1ane$ N Address(es) and TEID(s) for User Traffic for the

acce%ted EP "earers (if Direct T+nne1 is not +sed) or RNC Address(es) and TEID(s) for User Traffic for the acce%ted EP "earers (if Direct T+nne1 is +sed) and RAT t!%e$ IR Acti#ated) %er PDN connection. If the PDN 2 re4+ested UE6s 1ocation a nd<or User C information

(determined from the UE conte,t)$ the N a1so inc1+des the User 'ocation Information IE and<or User C Information IE in this messae. If the UE Time 7one has chaned$ the N inc1+des the UE Time 7one IE in this messae. If indicated$ the information IR Acti#ated indicates that IR is acti#ated$ 0hich is on1! %ossi"1e 0hen the  2 is not chaned. 2hen the Modif! /earer Re4+est does not indicate IR Acti#ated and  2 is not chaned$$ the  2 de1etes an! IR reso+rces "! sendin a De1ete /earer Re4+est to the other CN node that has  "earer reso+rces on the  2 reser#ed.

The N re1eases the non-acce%ted EP /earer conte,ts "! trierin the /earer Conte,t deacti#ation %roced+re. If the er#in 2 recei#es a D' %ac*et for a non-acce%ted "earer$ the er#in 2 dro%s the D' %ac*et and does not send a Do0n1in* Data Notification to the N.

Step 8. The er#in 2 (for er#in 2 re1ocation this 0i11 "e the Taret er#in 2) ma! inform the PDN 2(s) the chane of for e,am%1e for er#in 2 re1ocation or the RAT t!%e that e.. can "e +sed for charin$ "! sendin the messae Modif! /ea rer Re4+est %er PDN connection. The  2 a1so inc1+des User 'ocation Information IE and<or UE Time 7one IE and<or User C Information IE if the! are %resent in step 7. er#in Net0or* sho+1d "e inc1+ded if it is recei#ed in step 4. or er#in 2 re1ocation$ the er#in 2 a11ocates D' TEIDs on ;<= e#en for non-acce%ted "earers. The PDN 2 m+st ac*no01ede the re4+est 0ith the messae Modif! /earer Res%onse. In the case of er#in 2 re1ocation$ the PDN 2 +%dates its conte,t fie1d and ret+rns a Modif! /earer Res%onse (Charin Id$ MIDN$ etc.) messae to the er#in 2. The MIDN is inc1+ded if the PDN 2 has it stored in its UE conte,t.

If PCC infrastr+ct+re is +sed$ the PDN 2 informs the PCR a"o+t the chan e of$ for e,am%1e$ the RAT t!%e.

(8)

Step . The er#in 2 (for er#in 2 re1ocation this 0i11 "e the Taret er#in 2)

ac*no01edes the +ser %1ane s0itch to the taret N #ia the messae Modif! /earer Res%onse (Ca+se$ er#in 2 T+nne1 End%oint Identifier for Contro1 P1ane$ er#in 2 Address for Contro1 P1ane$ Protoco1 Confi+ration O%tions). At this stae the +ser %1ane %ath is esta"1ished for a11 EP /earer conte,ts "et0een the UE$ taret RNC$ taret N if Direct T+nne1 is not +sed$ er#in 2 (for er#in 2 re1ocation this 0i11 "e the Taret er#in 2) and PDN 2.

If the er#in 2 does not chane$ the er#in 2 sha11 send one or more @end mar*er@  %ac*ets on the o1d %ath immediate1! after s0itchin the %ath.

Step 1!. 2hen the UE reconises that its c+rrent Ro+tin Area is not reistered 0ith the net0or*$ or 0hen the UE6s TIN indicates @UTI@$ the UE initiates a Ro+tin Area U%date  %roced+re 0ith the taret N informin it that the UE is 1ocated in a ne0 ro+tin area. It is

RAN f+nctiona1it! to %ro#ide the PMM-CONNECTED UE 0ith Ro+tin Area information. The taret N *no0s that an IRAT &ando#er has "een %erformed for this UE as it recei#ed the "earer conte,t(s) "! hando#er messaes and therefore the taret N %erforms on1! a s+"set of the RAU %roced+re$ s%ecifica11! it e,c1+des the conte,t transfer %roced+res "et0een so+rce MME and taret N.

Step 11. 2hen the timer started at ste% ? e,%ires$ the so+rce MME sends a Re1ease Reso+rces messae to the o+rce eNode/. The o+rce eNode/ re1eases its reso+rces re1ated to the UE. 2hen the timer started in ste% ? e,%ires and if the so+rce MME recei#ed the er#in 2 chane indication in the or0ard Re1ocation Res%onse messae$ it de1etes the EP "earer reso+rces "! sendin De1ete ession Re4+est (Ca+se) messaes to the o+rce er#in 2. Ca+se indicates to the o+rce er#in 2 that the o+rce er#in 2 sha11 not initiate a de1ete %roced+re to0ards the PDN 2. The o+rce er#in 2 ac*no01edes 0ith De1ete ession Res%onse (Ca+se) messaes. If IR has "een acti#ated "efore this %roced+re$ the ca+se a1so indicates to the o+rce  2 that the o+rce  2 sha11 de1ete the "ear er reso+rces on the other o1d CN node "! sendin De1ete /earer Re4+est messae(s) to that CN node.

Step 12. If indirect for0ardin 0as +sed then the e,%ir! of the timer at so+rce MME started at

step 6 triers the so+rce MME to send a De1ete Indirect Data or0ardin T+nne1 Re4+est messae to the  2 to re1ease the tem%orar! reso+rces +sed for indirect for0ardin.

Step 13. If indirect for0ardin 0as +sed and the er#in 2 is re1ocated$ then the e,%ir! of the timer at taret N started at ste% ? triers the taret N to send a De1ete Indirect Data or0ardin T+nne1 Re4+est messae to the taret  2 to re1ease tem%orar! reso+rces +sed for indirect for0ardin.

References

Related documents

The literature review showed that, for most African RIAs, the results of common agricultural initiatives aiming at agriculture sector and agricultural trade development have

The pew rather than the pulpit is regarded as a woman’s place, serving as an auxiliary worker while men dominate in authority (Nason-Clark, 1997). It is within this remit that

The main challenge facing artificial photosynthesis researchers is therefore to achieve a high level of efficiency through synergy in the chemical process of capturing light

Two-photon fluorescence microscopy (TPM), invented by Denk et al in 1990 (1), is a three-dimensional (3D) imaging technology based on the nonlinear excitation of fluorophores.. TPM

Ülkümen, Gülden, Chakravarti, Amitav, and Vicki Morwitz (2010), “The Effect of Exposure to Narrow versus Broad Categorizations on Subsequent Decision Making and Information

Yoon, Yeosun, Zeynep Gürhan-Canli, Norbert Schwarz (2006), “The Effect of Corporate Social Responsibility (CSR) Activities on Companies with Bad Reputations,” Journal of Consumer

Traffic Breaks are defined in the Traffic Characteristics Inventory (TCI) database. Breaks are defined by beginning and ending mileposts called break points. Break points are