Appendix
98-367 Lab Setup Guide
GETTING STARTED
The 98-367 exam in the Microsoft Official Academic Course
(MOAC) series includes a textbook with sample exercises. The
exercises are written for classroom use under the supervision of an
instructor or lab aide. In an academic setting, the computer lab
might be used by a variety of classes each day, so you must plan
your setup procedure accordingly. For example, consider
automating the classroom setup procedure and using removable
hard disks in the classroom. You can use the automated setup
procedure to rapidly configure the classroom environment, and
remove the fixed disks after teaching this class each day.
LAB CONFIGURATION
This course should be taught in a lab containing networked
computers where students can develop their skills through
hands-on experience with Microsoft Windows. The exercises in the lab
manual require the computers to be installed and configured in a
specific manner. Failure to adhere to the setup instructions in this
document can produce unanticipated results when the students
perform the exercises.
The lab configuration consists of an instructor computer running
Microsoft Windows Server 2008 R2 Enterprise and the student
computers running Windows 7 Enterprise or Ultimate.
While the students will be looking at those services provided by
the instructor computer and his or her local computer, there are no
services that will affect other computers within the school.
Therefore, the computers can exist within the same network as the
other classrooms. In addition, students will need to have access to
the Internet.
Each workstation will be a member of the domain that will be
hosted by the instructor server and the students will need to have
local administrative account called Student and a domain
administrator called StudentXX where XX is the number assigned
to the computer.
Note
For the purposes of this lab, all server and workstation passwords, for user accounts and other purposes, will be set to Pa$$w0rd. This is obviously not a secure practice in a real world situation,
and instructors should remind students of this at the outset.
Server Requirements
The computer running Windows Server 2008 R2 in the classroom
requires the following hardware and software.
Hardware Requirements
Minimum: 64-bit dual-core processor Minimum: 4 GB RAM
Minimum: 120 GB DVD drive
Network interface adapter
Minimum: Super VGA (1024x768) display Keyboard
Mouse
Software Requirements
All of the software listed below is required for this course:
Microsoft Windows Server 2008 R2 Enterprise – evaluation edition available as a free download from Microsoft’s web site at
http://www.microsoft.com/windowsserver2008/en/us/trial-software.aspx.
Microsoft Baseline Security Analyzer 2.2 – Downloaded from
http://technet.microsoft.com/en-us/security/cc184923. Microsoft Security Essentials – Free download at
http://windows.microsoft.com/en-US/windows/products/security-essentials.
Workstation Requirements
Each workstation requires the following hardware and software.
Hardware Requirements
Minimum: 64-bit dual-core processor
Minimum: 2 GB RAM (4 GB Recommended) Minimum: 100 GB
DVD drive
Network interface adapter
Minimum: Super VGA (1024x768) display Keyboard
Software Requirements
All of the software listed below is required for this course:
Microsoft Windows Server 2008 R2 Enterprise – evaluation edition available as a free download from Microsoft’s web site at
http://www.microsoft.com/windowsserver2008/en/us/trial-software.aspx.
Remote Server Administration Tools for Windows 7 with Service Pack 1 (SP1) – Downloaded from
http://www.microsoft.com/download/en/details.aspx?id=7887. Microsoft Baseline Security Analyzer 2.2 – Downloaded from
http://technet.microsoft.com/en-us/security/cc184923. Microsoft Security Essentials – Free download at
http://windows.microsoft.com/en-US/windows/products/security-essentials.
SERVER SETUP INSTRUCTIONS
Before you begin, do the following:
Read this entire document.
Make sure you have the Instructor installation disks for Microsoft Windows Server 2008 R2 and Windows 7.
Installing the Instructor Server
Using the following setup procedure, install Windows Server 2008
R2 on Instructor Server. This procedure assumes that you are
performing a clean installation of the Windows Server 2008 R2
Enterprise evaluation edition, and that, if you have downloaded an
image file, you have already burned it to a DVD-ROM disk.
Warning
By performing the following setup instructions, your computer’s hard disks will be repartitioned and reformatted. You will lose all existing data on these systems.
1. Turn the computer on and insert the Windows Server 2008 R2 installation DVD into the drive.
2. Press any key, if necessary, to boot from the DVD-ROM disk. The Setup program loads, and the Install Windows window appears. 3. Modify the Language to install, Time and currency format, and
Keyboard or input method settings, if necessary, and click Next.
4. Click Install Now. The Select the operating system you want to install page appears.
5. Select Windows Server 2008 R2 Enterprise (Full Installation) and click Next. The Please read the license terms page appears.
6. Select the I accept the license terms checkbox and click Next. The Which type of installation do you want? page appears.
7. Click Custom (advanced). The Where do you want to install Windows? page appears.
Note
If there are existing partitions on the computer’s hard disk, select each one in turn and delete it before proceeding.
8. Select Disk 0 Unallocated Space and click Next. The Installing Windows page appears, indicating the progress of the Setup program as it installs the operating system. After the installation completes and the computer restarts, a message appears stating that The user’s password must be changed before logging on the first time.
9. Click OK. A Windows logon screen appears.
10. In the New password and Confirm Password text boxes, type Pa$
$w0rd and click the right-arrow button. A message appears, stating
that Your password has been changed.
11. Click OK. The logon process completes and the Initial Configuration Tasks window appears.
Once the installation process is finished, you must proceed to
complete the following tasks to configure the server and install the
necessary roles to support the student workstations. It is then
recommended to run Windows updates to acquire the latest patches
for Windows, but it is not required.
Completing Initial Server Configuration Tasks
Complete the following configuration tasks before you install
Active Directory Domain Services or any other roles on the server.
Configuring Date and Time Settings
1. In the Initial Configuration Tasks window, click Set time zone. The Date and Time dialog box appears.
2. If the time and/or date shown in the dialog box are not correct, click
Change date and time and, in the Date and Time Settings dialog
box, set the correct date and time and click OK.
3. If the time zone is not correct for your location, click Change time
zone and, in the Time Zone Settings dialog box, set the correct time
zone and click OK.
Installing Active Directory
To install Active Directory on ServerDC, use the following
procedure:
1. Log on with the local Administrator account, using the password
P@ssw0rd.
2. When the Initial Configuration Tasks window appears, click Add
3. Using the Add Roles Wizard, install the Active Directory Domain Services role.
4. When the role installation is complete, click the Close this wizard
and launch the Active Directory Domain Services Installation Wizard (dcpromo.exe) link. The Welcome To The Active Directory
Installation Wizard page appears.
5. Click Next to proceed with the Active Directory installation. 6. On the Operating System Compatibility page, click Next.
7. On the Choose a Deployment Configuration page, select Create a
new domain in a new forest and click Next.
8. On the Name the Forest Root Domain page, key contoso.com and click Next.
9. On the Set Forest Functional Level page, select Windows Server 2008 and click Next.
10. On the Additional Domain Controller Options page, verify that the
DNS server checkbox is selected and click Next. A Static IP
Assignment message box appears, warning you that the computer has a dynamically assigned IP address.
11. For the purposes of this manual, you can ignore the warning. Click
Yes, the computer will use a dynamically assigned IP address to
continue. A message box appears, warning you that the system cannot locate an existing DNS infrastructure.
12. Because you will be creating a new DNS infrastructure, you can ignore this warning and click Yes.
13. On the Location for Database, Log Files, and SYSVOL page, click
Next to accept the default settings.
14. On the Directory Services Restore Mode Administrator Password page, key P@ssw0rd in the Password and Confirm Password text boxes and click Next.
15. On the Summary page, click Next.
16. When the installation process is complete, restart the server.
After the server restarts, it functions as the domain controller for
the contoso.com domain. Students must log on to the domain in all
of the lab exercises.
Creating User Accounts
Each student must have a domain user account called Student##,
where ## is the same number as the computer the student is using.
To create the student accounts, use the following procedure:
1. Click Start, and then select Administrative Tools > Active
Directory Users and Computers. The Active Directory Users and
Computers console appears. 2. Expand the contoso.com domain.
3. Right-click the Users container and select New > User. The New Object-User Wizard appears.
4. Key Student## in the First Name and User Logon Name text boxes, where ## is the number assigned to the first student computer in the classroom. Then click Next.
5. In the Password and Confirm Password text boxes, key P@ssw0rd. 6. Clear the User Must Change Password At Next Logon checkbox and select the Password Never Expires checkbox. Then click Next. 7. Click Finish to create the user account.
8. Repeat steps 3–7 to create a Student## user account for each computer in the classroom.
9. Right-click the Users container and select New> Group. The New Object-Group Wizard appears.
10. In the Group Name text box, key Students. Then click Next. 11. Click Finish to create the group.
12. In the Users container, double-click the Students group you just created. The Students Properties sheet appears.
13. Click the Members tab.
14. Click Add, key the name of the first Student## user you created, and click OK.
15. Repeat step 14 to add all the Student## accounts you created to the Students group.
16. Click OK to close the Students Properties sheet.
17. Using the same procedure, open the Properties sheet for the Domain Admins group and add the Students group to the Domain Admins group as a member.
CLOSE the Active Directory Users and Computers console.
The students will use these Student## accounts to log on to the
domain as they complete the exercises in the lab manual. Their
membership in the Students group provides domain administrator
privileges, as well as local Administrator privileges on their
individual servers.
STUDENT COMPUTER INSTRUCTIONS
Installing Windows 7 on Student Computers
Using the following setup procedure, install Windows 7 on the
instructor and student computers. This procedure assumes that you
are performing a clean installation of the Windows 7 Enterprise
evaluation edition, and that, if you have downloaded an image file,
you have already burned it to a DVD-ROM disk.
Warning
By performing the following setup instructions, your computer’s hard disks will be repartitioned and reformatted. You will lose all existing data on these systems.
1. Turn the computer on and insert the Windows 7 installation DVD into the drive.
2. Press any key to boot from the DVD (if necessary). A progress indicator screen appears as Windows is loading files. The computer switches to the Windows graphical interface and the Install Windows page appears.
3. Click Next to accept the default values for the Language to install, Time and currency format, and Keyboard or input method
parameters. The Install now screen appears.
4. Click the Install now button. The Please read the license terms page appears.
5. Select the I accept the license terms checkbox and click Next. The Which type of installation do you want? page appears.
6. Click the Custom (advanced) option. The Where do you want to install Windows? page appears.
7. Click Drive options. Additional command buttons for manipulating the drives appear.
8. Select a partition in the list and click Delete. A warning box appears, prompting you to confirm that you want to delete the partition. 9. Click OK. The system deletes the partition.
10. Repeat steps 8 and 9, if necessary, to delete all other existing partitions on the computer.
11. Click New. The new partition controls appear.
12. In the Size spin box, use all of the space for your C drive. 13. Click Apply. A message box appears, specifying that Windows
might have to create additional partitions.
14. Click OK. The system creates the partition you defined, as well as well as a 100 MB partition.
15. Select the large partition you just created and click Next. The system installs Windows 7, a process that takes several minutes and requires two system restarts. Then, the Set Up Windows page appears.
16. In the Type a user name text box, type student.
17. In the Type a computer name text box, type any name that is appropriate for your classroom, and click Next. The Set a password for your account page appears.
18. In the three text boxes, type Pa$$w0rd and click Next. The Help protect your computer and improve Windows automatically page appears.
19. Click Ask me later. The Review your time and date settings page appears.
20. From the Time zone drop-down list, select the correct time zone or your location. If the date and time specified in the calendar and clock are not accurate, correct the settings and click Next. The Select your computer’s current location page appears.
21. Click Work network. The system finalizes your settings and the Windows desktop appears.
22. Remove the Windows 7 installation DVD from the drive.
Once the installation process is finished, you must proceed to
complete the following tasks to configure the server and install the
necessary roles to support the student workstations. It is then
recommended to run Windows updates to acquire the latest patches
for Windows, but it is not required.
Adding Computers to a Domain
1. Click Start. Then click Control Panel. The Control Panel window appears.
2. Click System and Security > System. The System control panel appears.
3. Click Change settings. The System Properties sheet appears. 4. Click Change. The Computer Name/Domain Changes dialog box
appears.
5. Select the Domain option, and type contoso in the text box. Then click OK. A Windows Security dialog box appears.
6. Authenticate with the user name Administrator and the password Pa$
$w0rd and click OK. A message box appears, welcoming you to the
domain.
7. Click OK. Another message box appears, prompting you to restart the computer.
8. Click OK.
9. Click Close to close the System Properties dialog box.
10. You must restart your computer to apply these changes message box appears. Click Restart Now. The computer restarts.
Installing the Remote Administration Tools for
Windows
1. Open Internet Explorer and open the
http://www.microsoft.com/download/en/details.aspx?id=7887
website. Alternately, you can download the file and provide to the students through a shared folder.
2. Download the appropriate
Windows6.1-KB958830XXX-RefreshPkg.msu file.
3. Double-click the Windows6.1-KB958830XXX-RefreshPkg.msu file that you just downloaded.
4. When it asks if you want to install the Windows software update, click the Yes button.
5. When it displays the license terms, click the I Accept button. 6. When the installation is complete, click the Close button. 7. Open the Control Panel.
8. In Category view, click Programs and then click Turn Windows
9. When the Turn Windows features on or off dialog box opens, expand
Remove Server Administration Tools.
10. Under Feature Administration Tools, click the Group Policy
management Tools.
11. Expand Role Administration Tools, expand AD DS and AD LDS
Tools, expand AD DS Tools, and select AD DS Snap-ins and
Command-line Tools. 12. Click OK.
