• No results found

( Check out this event now at Aucto.com (

N/A
N/A
Protected

Academic year: 2021

Share "( Check out this event now at Aucto.com ("

Copied!
14
0
0

Loading.... (view fulltext now)

Full text

(1)

(https://www.aucto.com) Check out this event now at Aucto.com (https://www.aucto.com)

Steel Coast Trading Co

Steel Coast Trading Co, 1619 Broadway, Lorain, Ohio, United States, 44052

Asset Locations:

Steel Coast Trading Co, 1619 Broadway, Lorain, Ohio, United States, 44052

(2)

Lot # Description Current Bid Notes 2001.168a BIG Oil Hole CV40-OHS1000-6.500 TG100 Collet Chuck Coolant Indcuer CAT40 (Parts) $80.00 1911.137d*~ Botek Deep Hole Drilling Systems 3/16" Gun Drill: .1875" x 14.0" Carbide Tipped $47.00 1911.221a SOWA 3/4" ER40 Steel Sealed Collet: Sealed For Coolant Through Applications, New $26.00 SCT170123-01d* Koolcarb 49/64 in .7656 Carbide Tipped Coolant Feed Gun Drill: 9 Flutes, NEW USA $35.00 1911.158a* Hyper Tool .2755" (7mm) x 18" OAL Coolant Fed Deep Hole Gun Drill Carbide Tipped $60.00 1911.159c* Hyper Tool .1575" (4mm) x 18" OAL Coolant Fed Deep Hole Gun Drill Carbide Tipped $40.00 1911.160c* Hyper Tool 19/64"+ .2969" x 16" OAL Coolant Deep Hole Gun Drill: Carbide Tipped $47.00 1911.161a* Hyper Tool .2362" (6mm) x 22" OAL Coolant Fed Deep Hole Gun Drill Carbide Tipped $45.00 1911.162a* Hyper Tool .2130" #3 x 22" OAL Coolant Fed Deep Hole Gun Drill: Carbide Tipped $47.00 1911.163b* Hyper Tool .3937" 10mm x 22" OAL Coolant Fed Deep Hole Gun Drill: Carbide Tipped $60.00 1911.164a* Hyper Tool .3937" 10mm x 25" OAL Coolant Fed Deep Hole Gun Drill: Carbide Tipped $70.00 1911.165a* Hyper Tool .3937" 10mm x 26" OAL Coolant Fed Deep Hole Gun Drill: Carbide Tipped $75.00 1911.166a* Star .1960" #9 x 10" OAL Coolant Fed Deep Hole Gun Drill: Carbide Tipped, NOS $47.00 1911.167a* Hyper Tool 1/2" .500 x 26.75" OAL Coolant Fed Deep Hole Gun Drill Carbide Tipped $60.00 1911.168a* Hyper Tool .2756" (7mm) x 18" OAL Coolant Fed Deep Hole Gun Drill Carbide Tipped $60.00 1911.169b* Hyper Tool 1/2" .500 x 28.75" OAL Coolant Fed Deep Hole Gun Drill Carbide Tipped $75.00 1911.170b* Hyper Tool 11/32" .3437 x 22" OAL Coolant Fed Deep Hole Gun Drill Carbide Tipped $50.00 1911.171a* Hyper Tool 1/4" .2500" x 25" OAL Coolant Fed Deep Hole Gun Drill: Carbide Tipped $50.00 1911.172b* Star 1/2" x 25.75" OAL Carbide Tipped Coolant Fed Gun Drill: No Internal Thread $50.00 1911.173a* Star 1/2" x 26.75" OAL Carbide Tipped Coolant Fed Gun Drill: No Internal Thread $50.00 1911.175b* Hyper Tool 3/8" .3750" x 22" OAL Coolant Fed Deep Hole Gun Drill: Carbide Tipped $47.00 1911.177b* Hyper Tool 11/32" .3437 x 28" OAL Coolant Fed Deep Hole Gun Drill Carbide Tipped $65.00 1911.178c* Hyper Tool 5/16" .3125 x 25" OAL Coolant Fed Deep Hole Gun Drill: Carbide Tipped $50.00 1911.179* Sterling BBFIGC0043752200KUAG 7/16" x 22" OAL Carbide Tipped Coolant Gun Drill $50.00 1811.030 3/4" Thread Tap Tapping Collet: Modern Magic #3 Chuck, 1-11/16" OD $10.00 1811.124 TG-100 Collet Chuck: 90mm, Projection, BT-40 Taper Shank, Used in Good Condition $25.00 1811.132a Dixi 733-J-430 Double Taper Collet Chuck w Collet AG-60 AG-75 Swiss Quick Change $45.00 1811.133a Dixi T-230 Collet Chuck with 1 Collet: AG-60, AG-75, Jig Mill Swiss Quick Change $45.00 1811.134a Dixi 733-J-430 Double Taper Collet Chuck: AG-60, AG-75, Swiss Quick Change Shank $25.00 1812.013a TSD Acura-Grip 90501 Collet Nut, Used in Good Condition $10.00 1812.024b TSD 3/8" Acura-Flex 9400002 Collet Retention Nut, Used in Good Condition $10.00

(3)

1812.025 TSD 1/2" Acura-Flex 9400020 Collet Retention Nut, Used in Good Condition $10.00 1812.027b Erickson Double Angle 180-DA-NP Non-Pullout Collet: 3/4" 180DA-NP0750 $13.00 1812.028 Erickson Double Angle 180-DA-NP Non-Pullout Collet: 1/2" 180DA-NP0500 $10.00 1812.037 TSD Acura-Mill 1" Non-Pullout Collet: 9300012, Used in Good Condition $32.00 1812.038 TSD Acura-Mill 3/4" Collet: 901000, Used in Good Condition $20.00 1812.095 Command C6C5-1000 TG-100 Comflex Collet Chuck: 5" Extension, CAT-50 Taper Shank $25.00 1901.118 10 Piece Lot of Hardinge 5C E1 & E2 Emergency Collets, Used in Good Condition $65.00 1901.136 DA-180 Collet Chuck Dixi 60/75 Swill Quick Change Taper Shank DE-84973 $47.00 1901.188a Command DE-84973 DA-180 Collet Chuck: Dixi 60/75 Swiss Quick Change Taper Shank $35.00 1902.076a Universal Engineering 80351 1" Capacity Kwik-Switch 300 Acura-Grip Collet Chuck $20.00 1902.077a Universal Engineering 80319 1/2" Kwik-Switch 300 Double Taper Y Collet Chuck $20.00 1902.228 Brown & Sharpe 22C Collet Chuck Nut Nose: 3-7/8" OD 3-3/8" 8 TPI $20.00 1903.029^ Kennametal KV45TG100325 TG-100 Collet Chuck 3-1/4 Projection Hitachi Seiki Shank $30.00 1903.101^ Allied Machine AMEC J Series 8" Spade Drill Insert Bit: 102J2-0800 $95.00 1903.149 Allied Machine AMEC102J2-0800 J Series Spade Drill Insert: 7.967" Diameter $95.00 1904.031a Balas S12-6"-C6-1 Flexi-Grip C6 Collet Chuck: 1-1/2" Straight Shank 7" Long $20.00 1904.032 Balas S16-6"-C8 Flexi-Grip C8 Collet Chuck: 2" Straight Shank, 6" Long $32.00 1904.060 Erickson 409-#30MMS, DA-400 (63/64" cap) Collet Chuck: NMTB-30 Taper Shank $32.00 1904.063a Allied Machine AMEC 10204-0102, AA Series 1-1/16" 1.0625 Spade Drill Insert: HSS $10.00 1904.064a SBS 1-3/16" 1.188" Spade Drill Insert: AMEC AA Series 10204-0106, HSS $10.00 1904.066 Allied Machine AMEC 1-25/32" 1.7812" C-Series Special (3" long) Spade Insert HSS $20.00 1904.067 1-7/8" (1.875") AMEC, C-Series, Spade Drill Insert: HSS, Used in Good Condition $10.00 1904.068 Waukesha 1025-0209F 2-9/64" 2.1406 Spade Drill Insert: AMEC, Series D, HSS $10.00 1904.069 Waukesha 1005-0216F 2-1/4" 2.25" Spade Drill Insert: AMEC Series D HSS $15.00 1904.070b Waukesha 1025-0228F 2-7/16" 2.4375 Spade Drill Insert: AMEC, D Series, HSS $15.00 1904.187 George Whalley 2-76-034-111 AMEC Series A Spade Drill 11-1/4" Long 1" Shank $25.00 1904.203^ MST Mizoguchi DETa-1 Collet Chuck: CAT-50 Taper Shank, Used in Good Condition $50.00 1904.221 Erickson Tool TG-100 Collet Chuck: CAT-45 Taper Shank, 3-05-300-100 $32.00 1905.066 Balas C8 Flexi-Grip Collet Chuck NMTB-50 Taper Shank with 3/8" Collet $32.00 1905.207 Erickson TG-200 Collet Chuck CAT-50 Taper Shank 200-BTG-50V, Used Good Condition $32.00 1907.079 Kennametal CV50TCF500 Tension Compression Tap Collet Chuck: CAT-50 Taper Shank $55.00 1907.121 5 Piece Lot of Erickson TG-100 Collets: 11/16", 23/32", 7/8", 29/32" 1" USA $25.00 1907.140 Kennametal SS075DA204712 DA-200 Double Angle Collet Chuck: 3/4" Shank, 7" Long $30.00 1907.143 Turret Lathe DA-180 Double Angle Reamer Collet Chuck: 1-1/2" Straight Shank $45.00 1907.144 TG-100 Collet Chuck: 9" Long, 1-1/2" Straight Shank, Used in Good Condition $32.00

(4)

1907.145a DA-100 Low Profile Double Angle Collet Chuck: 1" Shank w/ 1/2" -20 Female Thread $25.00 1907.146 Kennametal 062DA208469 DA-200 Double Angle Collet Chuck: 5/8" Shank, 3-1/4" Long $25.00 1907.184 Kennametal CV50TCG562 Type G Tap Tapping Collet Chuck: CAT-50 Taper Shank $35.00 1907.189 Universal Engineering 91957 TG-100 Collet Chuck CAT-50 V-Flange Taper Shank $35.00 1909.066 2 Piece Lot of XZ Double Taper Collets: 13/16" & 1-1/16" Round Smooth $13.00 1909.174 George Whalley 3-1/8" 3.125" Flat Spade Drill Insert: fits AMEC F Series Holders $45.00 1909.177 Allied Machine AMEC 4-1/16" 4.0625" Spade Drill Insert for G Series: 10274-0402 $55.00 1910.040 Allied AMEC 3-3/4" 3.75" Series F HSS Spade Drill Insert: 10264-0324, USA $55.00 1910.042 Waukesha 2-1/2" 2.5" HSS Spade Drill Insert for AMEC Series E Holders: USA $45.00 1910.166 DA-100 Double Angle Collet Chuck: 1" Straight Extension Shank, 4.8" OAL $20.00 1910.167 DA-300 Double Angle Collet Chuck: 5/8" Straight Shank 3" OAL Used Good Condition $20.00 1910.191 Parlec C5-10SC4 100-PG Single Angle Collet Chuck 3-1/2" Proj TG-100 CAT-50 Shank $40.00 1910.193a Kennametal Erickson TG-100 Single Angle Collet Chuck Hex Collet Nut Locknut $20.00 1911.035b Erickson TG-100 Collet Chuck: 2-1/4" Projection, NMTB-40 Quick Change Shank $45.00 1911.180 DME Tool .1968" (5mm) x 16" OAL Coolant Fed Deep Hole Gun Drill: Carbide Tipped $25.00 1911.181 Botek 5.5mm x 16" OAL Coolant Fed Deep Hole Gun Drill: Carbide Tipped $25.00 1911.183b Burdon 1/4" .2500 x 20" OAL Coolant Fed Deep Hole Gun Drill: Carbide Tipped $26.00 1911.188a Hyper Tool .3149" 8mm x 22" OAL Coolant Fed Deep Hole Gun Drill: Carbide Tipped $20.00 1911.189a DME Tool .3390 "R" x 16" OAL Coolant Fed Deep Hole Gun Drill Carbide Tipped $25.00 1911.190a Hyper Tool .3390" "R" x 22" OAL Coolant Fed Deep Hole Gun Drill: Carbide Tipped $26.00 1911.191 Hyper Tool .3390" "R" x 28" OAL Coolant Fed Deep Hole Gun Drill: Carbide Tipped $32.00 1911.193b Hyper Tool .7283" 18.5mm x 18" OAL Coolant Fed Deep Hole Gun Drill: Carbide Tip $32.00 1911.194 Command Comflex C4C4-1000 TG-100 Collet Chuck: CAT-40 V-Flange Taper Shank $40.00 1911.198a Scully-Jones 19106 Magic Chuck Master Collet Holder: 1-1/4" Bore, 2MT Shank $26.00 1911.215a Cleveland 13/16" .8125 Twin Jet Coolant Thru Carbide Tipped Gun Drill Bit 8" OAL $47.00 1911.224 Universal Engineering Series ZZ Double Taper Collet: 11/16" Round Smooth $15.00 1911.225a Universal Engineering Series ZZ Double Taper Collet: 3/4" Round Smooth $15.00 1911.226 Universal Engineering Series ZZ Double Taper Collet: 7/8" Round Smooth $15.00 1911.228 Universal Engineering Series ZZ Double Taper Collet: 1/2" Round Smooth $15.00 1911.235 Kennametal CV40TG075275 TG-75 Collet Chuck: 2-3/4" Projection CAT-40 Taper Shank $40.00 1911.236 Erickson Safe Drive Tap Holder Tapping Chuck Fs Collets, CAT-40 Taper Shank, USA $80.00 1912.014 Kennametal CV40SDF731 Tension Compression Tap Tapping Chuck CAT40 Shank F Collet $60.00 1912.017^ Command B2C4-1000 TG-100 Collet Chuck: 4" Extension BT-30 Taper Shank $26.00 1912.025 Hyper Tool .3937" 10mm x 29" OAL Coolant Fed Deep Hole Gun Drill: Carbide Tipped $47.00 1912.038^ Scully Jones 19114 #4 Magic Collet Chuck 2-3/8" Bore Morse Taper 4 Shank MT4 $80.00

(5)

4MT 1912.039 McCrosky Wizard B-3 Quick Change Master Collet Chuck: Morse Taper #3 Shank (3MT) $40.00 1912.044 Parlec C40-10SC5 TG-100 Collet Chuck: 5" Extension, CAT-40 V-Flange Taper Shank $32.00 1912.048 Techniks SYIC-16110 BT30xER25-60 ER-25 Collet Chuck: BT-30 Taper Shank $32.00 1912.054 AMEC 31/32" Indexable Carbide Spade Drill 1-1/4" 90 Degree Countersink 3/4 Shank $65.00 1912.067 Techniks SYIC CAT50xER20M-6" ER-20 Collet Chuck: 6" Extension CAT-50 Taper Shank $47.00 1912.078 Microcentric Hainbuch CB 42-D Dead Length Collet Lathe Chuck 6-1/2" OD $280.00 1912.090 Kennametal CV50TG100750 TG-100 Collet Chuck 7-1/2" Projection CAT-50 Taper Shank $40.00 1912.097 Valenite VE1000 DA-100 Double Angle Extension Collet Chuck: 1" Shank 7" OAL $32.00 1912.100 Alps Tool Front Face ER-40 Collet Chuck Live Tool Holder Okuma Clutch Drive $810.00 2001.068 Rego-Fix Swiss ER-32 Collet Chuck 3-7/8" Projection CAT-50 Taper Shank $40.00 2001.083 Erickson CV40TG100400 TG-100 Collet Chuck: 4" Projection CAT-40 Taper Shank $40.00 2001.122 Spade Drill Insert Tool Holder: AMEC Series B, 3/4" Straight Shank, 7" OAL $35.00 2001.141 Command B2C4-0020 Micro Precision ER-20 Collet Chuck BT-30 Taper Shank $40.00 2001.166 ER-40 Coolant Thru Collet Chuck Live Tool Holder: Okuma Clutch Drive $725.00 2001.169 DA200 Collet Chuck Drill Press Spindle: 1-5/8" Column Dia 26" OAL $60.00 2001.170 GS CAT50 TG100-5.50" TG-100 Collet Chuck: 5-1/2" Projection, CAT-50 Taper Shank $40.00 2001.184 Hyper Tool 3/6" .1875" x 14" OAL Carbide Tipped Deep Hole Drilling Gun Drill $20.00 2001.203 George Whalley 2-7/8" 2.875" Spade Drill Insert: AMEC E Series $47.00 2001.204 2-1/2" (2.5") Spade Drill Insert: AMEC D Series, Used in Good Condition $40.00 2001.217a 180-DA-NP Non-Pullout Double Angle Collet: 3/8" Round Smooth Used Good Condition $15.00 2001.218 180-DA-NP Non-Pullout Double Angle Collet: 5/8" Round Smooth Used Good Condition $15.00 2001.226 Hardinge 2-J Collet: 2J, 7/8" Round Smooth, Used in Good Condition $20.00 2001.227 Erickson G-Series Tap Collet: 340774200, 1.370" Bore 8737CE4 Used Good Condition $15.00 2001.229 4 Pc Lot Collis Morse Taper #2 Collets 19/64", 3/8", 5/16" Tap, 3/8" Tap MT2 2MT $32.00 2001.231 Erickson NTC075P 3/4" N Series Tap Collet: .906" Bore, Used in Good Condition $15.00 2001.234 4 Piece Lot Morse Taper #2 Tap Collets 1/4", 1/2", 9/16", 1/8" Pipe MT2 2MT $40.00 2001.236 6 Pc Lot Morse Taper #2 Drill Collets 3/16" 5/16" 3/8" 23/64" 27/64 1/2" MT2 2MT $47.00 BV1901.109 DA-400 Double Angle Collet Chuck: 3-7/8" Projection NMTB-30 Taper Shank $21.00 BV1905.045 MicroCentric 65-BZI 33.984mm Smooth Round Collet Hainbuch 65 USA $85.00 BV1905.049 MicroCentric Collet Chuck: Hainbuch 65 6-1/2" OD Plain Back, Used Good Condition $320.00 SCT150420-08b Cone Conomatic 1" Collet Draw Bar & Pusher Bar for 1" New Britain Collets $10.00 SCT150429-07b Balas 1140 Master Collet 1NB New Britain for Martin Collet Pads, 60-1" Conomatic $10.00

(6)

SCT151207-14^ Collis #4 5MT C1 Magic Collet Chuck: 2-3/8" Bore, Morse Taper #5 Shank MT5 $10.00 SCT160108-16 53" Deep Hole Boring Spade Insert Drill Holder Morse Taper #6 Shank MT6 6MT $70.00 SCT160412-11 AMEC 5" Counterbore or Bottoming Slotting Spade Drill Insert H-Series 11/16" Thk $10.00 SCT160606-04a Brown & Sharpe #22 Collet Chuck Sleeve 2-3/4" Nose OD 4.255" Long 2-3/8" Tail OD $10.00 SCT160606-07b Brown & Sharpe #22 (#3) Collet Chuck Sleeve 3.7" Lg OD 4.255" Long 2.913 Tail OD $10.00 SCT160606-08b Brown & Sharpe #22 Collet Chuck Sleeve 2-1/2" Nose OD 4.255" Long 2-1/8" Tail OD $10.00 SCT160606-10a Brown & Sharpe 22C (#3) Collet Chuck Sleeve 3.70" Lg OD 4.255" Long 2.93 Tail OD $10.00 SCT160606-12b Balas B&S 22C Collet Chuck Sleeve 2.5" Lg OD 4.255" Long 2-1/8" Sm OD 42-7896-1 $10.00 SCT160606-13a Brown & Sharpe 22C Collet Chuck Sleeve 2-3/4" Lg OD 2-3/8" Sm OD 42-11689-99 $10.00 SCT160607-03b Brown & Sharpe 23A Collet Chuck Nut Nose 4-3/4" OD 4-1/4" -10TPI Thread 42-21237 $10.00 SCT160607-06b Brown & Sharpe #11 11Y Collet Chuck Sleeve 1-7/8" Lg OD 1-1/2" Sm OD 42-13606-99 $10.00 SCT160607-07 Brown & Sharpe #10 Collet Chuck Sleeve 1/2" Cap 1.312" Lg OD 1.187" Sm OD $10.00 SCT160607-13 8 Pieces Brown & Sharpe #11 11Y 11SC Collets Hardinge Branded Round Square Hex $10.00 SCT160818-07 16 Pc Lot Grotz EVB Multi-Spindle Drill & Tap Collets: 5/8" Base OD, 1-3/8" Long $30.00 SCT160818-08 6 Piece Lot of Grotz EVB-82E Collet Nuts EVB82253, Used in Good Condition $10.00 SCT160818-11 4 Piece Lot of Grotz EVB-132E Collet Nuts EVB132253, Used in Good Condition $10.00 SCT160920-02 4-1/8" Adjustable Spade Drill Insert ACME G Series? NOS New Old Stock $10.00 SCT170213-05 41/64" Coolant Thru Carbide Tipped Slotting Drill: 1" Straight Gun Drill Shank $10.00 SCT170718-03a~ PCM 1004 Precision Swiss Made ER-25 CNC Collet Chuck 1" Straight Shank $20.00 SCT171016-14 Universal Engineering Y Series Double Taper Turret Lathe Collet Chuck 3/4" Shank $10.00 SCT171219-09d Hardinge S26 Collet Pad Set: 2-5/32" (2.155") Round, Used in Good Condition $10.00 SCT171219-10d Hardinge S26 Collet Pad Set 1-7/8" Undersized Round 1.862" Used Good Condition $10.00 SCT180202-03 Modern Magic #3 Collet 4MT Tool Holder, Morse Taper #4 Bore, 1-11/16" OD Shank $10.00 SCT180328-19 High Quality Tools DA-180 Double Angle Collet Chuck: CAT-50 Taper Shank $15.00 SCT180406-01 Command C6C4-1500 TG-150 Collet Chuck CAT-50 V-Flange Taper Shank $17.00

(7)

SCT180406-02 Ex-Cell-O Tool CV-49-16715 TG-150 Collet Chuck CAT-50 V-Flange Taper Shank $17.00 SCT180410-10 Scully Jones CC-55-M DA-180 Double Angle Collet Chuck CAT-50 Taper Shank $13.00 SCT180411-09a~ Nikken CAT50U-MMC8-110A VMK-8 Collet Chuck CAT-50 V-Flange Taper Shank $47.00 SCT180411-12 Davis 374-02113-00 180-DA Double Angle Collet Chuck 7-1/4" Extension CAT-50 $32.00 SCT180412-08 Lyndex C5037-0020 ER-20 Collet Chuck: 8" Projection CAT-50 Taper Shank $40.00 SCT180425-11 3 Pieces of Snow Grotz Hypneumat Drill Collets #2? Used in Good Condition $10.00 SCT180426-10 Brown & Sharpe #11 Collet Chuck Sleeve 1-7/8" Lg OD 1-1/2" Sm OD 42-13606-99 $10.00 SCT180426-11a Brown & Sharpe #11 Collet Chuck Sleeve: 1-3/4" Large OD, 3.31" Long, 42-4379-99 $10.00 SCT180430-14 Sterling BBEI 1945-9192 .580" Carbide Tipped Gun Drill 9" Flute Length, 1" Shank $21.00 SCT180501-05 Ex-Cell-O Tool, CV-49-16713, TG-150 Collet Chuck: 4-3/4" Projection CAT-50 Shank $17.00 SCT180510-15 MariTool BT40 ER16-70 ER-16 Collet Chuck: 70mm Projection BT-40 Taper Shank $17.00 SCT180523-01 Maritool, BT40-ER16-100, ER-16 Collet Chuck: 100mm Projection, BT-40 Taper Shank $17.00 SCT180531-03 APT Multi-Tool Spade Drill: 13/16" Straight Shank with 1-1/8" Blade Insert $13.00 SCT180713-04 Jones & Lamson J&L Modern 1-1/4" Magic Collet Chuck Morse Taper #3 Shank MT3 3MT $20.00 SCT180718-03 Showa CV50-CTH20-165 C20 Collet Chuck: 6-1/2" Projection CAT-50 Taper Shank $10.00 SCT180720-04 2 Pieces Allied Machine AMEC 2-7/16" E Series Spade Inserts: Used Good Condition $10.00 SCT180720-06 4 Piece Lot of 7/8" Hex Head Collets: Procunier (?) Used in Good Condition $15.00 SCT180821-14 Bendix #3 Magic Collet Tap Chuck: 1-3/4" Bore Morse Taper #5 Shank MT5 5MT $21.00 SCT180821-15 Magic Collet Tap Chuck: 1-1/2" Bore, Morse Taper #5 Shank MT5 5MT $10.00 SCT180822-06^ Kennametal, CV50TG075450, TG-75 Collet Chuck: CAT-50 Taper Shank $17.00 SCT180920-02a Sandvik C8 Flexi-Grip Collet Chuck: 70mm Projection BT-40 Taper Shank $21.00 SCT180920-05 Carboloy BT40-TH3.63-0100 Tap Tapping Chuck for Bilz WE-1 Collets: BT-40 Shank $40.00 2002.007a 5/8" Tap Adapter Quick Change Collet: BILZ WE-2 Shank, Used in Good Condition $21.00 SCT150508-06b 22 Pc Assortment Martin M10 Collet Pads for 1" Cone NB Master Collets 3/8 to 1" $10.00 2002.008 Command XTC1-0562 9/16" Tap Adapter Quick Change Collet: Bilz WE-1 Shank $17.00 2002.017 Command XTC1-0312 5/16" Tap Adapter Quick Change Collet: Bilz WE-1 Shank $17.00

(8)

2002.030 Autoblok 12013122 12" CNC Power Lathe Chuck: 2-1/2" Thru Hole, Plain Back $765.00 2002.031 8-1/4" OD CNC Power-Hold Lathe Chuck 1-3/8" Dead Stop Center A2-8 Taper Hub $255.00 2002.032 Hardinge Sure-Grip HM-310-8 10" CNC Power Lathe Chuck 2-1/2" Thru Hole A2-8 Back $1,275.00 2002.033 Rohm 16MNCR5 8" CNC Power Lathe Chuck: 1-1/2" Thru Hole, A2-6 Back $300.00 2002.034 10" CNC Power Lathe Chuck: Standard Tongue & Groove Top Jaws A2-8 Back $255.00 2002.064 Command C6C4-1000 TG-100 Collet Chuck Tool Holder: CAT-50 V-Flange Taper Shank $35.00 2002.065a Beaver CV-49-16630 TG-100 Collet Chuck 4" Projection CAT-50 V-Flange Taper Shank $35.00 2002.106 Logan 210mm (8") 3-Jaw CNC Power Lathe Chuck: A2-6 Short Taper Hub USA $385.00 2002.156 Wescott 13-1/2" Combination Independent & Universal Scroll Lathe Chuck 4-Jaw $595.00 2003.030 10" OD Lathe Backing Plate: 5-1/2" Thru Hole, D1-8" Camlock Spindle Hub $75.00 2003.059 180-DA Collet Chuck: 1" Straight Shank DA180, Used in Good Condition $50.00 2003.060 Bardons & Oliver 316 Releasing Tap Chuck: 1-1/2" Straight Shank $45.00 2003.079 Super-Flex C-Series Collet: 5/8" Round, Cincinnati Monoset 3-CH $40.00 2003.082 Super-Flex A-Series Collet: 3/16" Round, Cincinnati Monoset 1-CH $21.00 2003.083 5 Pcs Universal Engineering Acura-Tap Tapping Collets: 7/8" Cap Series $45.00 2003.084 11 Pcs Universal Engineering Acura-Tap Tapping Collets 7/8" Cap Series $95.00 2003.088a Ziegler 3LX-906C Square Drive Tap Collet 3/4" Pipe FL Tool 3-TC-906 TA3-906C LX3 $30.00 2003.089a Ziegler 3LX-687C Square Drive Tap Collet 1/2" Pipe FL Tool 3-TC-687 TA3-687C LX3 $30.00 2003.090 Ziegler 3LX-700C Square Drive Tap Collet 3/8" Pipe FL Tool 3-TC-700 TA3-700C LX3 $30.00 2003.091a Ziegler 3LX-562C Square Drive Tap Collet 1/4" Pipe FL Tool 3-TC-562 TA3-562C LX3 $30.00 2003.092a Ziegler 3LX-437C Square Drive Tap Collet 1/8" Pipe FL Tool 3-TC-437 TA3-437C LX3 $30.00 2003.093a Ziegler 3LX-652C Square Drive Tap Collet 1/2" BSPP FL Tool 3-TC-652 TA3-652C LX3 $30.00 2003.094 Ziegler 3LX-255C Square Drive Tap Collet: 1/4" -N FL Tool 3-TC-255 TA3-255C LX3 $30.00 2003.095a Ziegler 3LX-318C Square Drive Tap Collet: 5/16" -N FL Tool 3-TC-318 TA3-318C LX3 $30.00 2003.096a Ziegler 3LX-381C Square Drive Tap Collet: 3/8" -N FL Tool 3-TC-381 TA3-381C LX3 $30.00 2003.097a Ziegler 3LX-323C Square Drive Tap Collet: 7/16" -N FL Tool 3-TC-323 TA3-323C LX3 $30.00 2003.098a Ziegler 3LX-367C Square Drive Tap Collet: 1/2" -N FL Tool 3-TC-367 TA3-367C LX3 $30.00 2003.099a Ziegler 3LX-429C Square Drive Tap Collet: 9/16" -N FL Tool 3-TC-429 TA3-429C LX3 $30.00 2003.100a Ziegler 3LX-480C Square Drive Tap Collet: 5/8" -N FL Tool 3-TC-480 TA3-480C LX3 $30.00 2003.101a Ziegler 3LX-590C Square Drive Tap Collet: 3/4" -N FL Tool 3-TC-590 TA3-590C LX3 $30.00 2003.102a Ziegler 3LX-697C Square Drive Tap Collet: 7/8" -N FL Tool 3-TC-697 TA3-697C LX3 $30.00 2003.103 Ziegler 3LX-759C Square Drive Tap Collet 15/16" -N FL Tool 3-TC-759 TA3-759C LX3 $30.00 2003.104a Ziegler 3LX-800C Square Drive Tap Collet: 1" -N FL Tool 3-TC-800 TA3-800C LX3 $30.00 2003.105 Ziegler 3LX-896C Square Drive Tap Collet: 1-1/8" FL Tool 3-TC-896 TA3-896C LX3 $30.00 2003.106a Ziegler 2LX-562C Square Drive Tap Collet 1/4" Pipe FL Tool 2-TC-562 TA2-562C LX2 $21.00 2003.107 Ziegler 2LX-437C Square Drive Tap Collet 1/8" Pipe FL Tool 2-TC-437 TA2-437C LX2 $21.00 2003.108a Ziegler 3LX-312C Square Drive Tap Collet: 1/8" ssP FL Tool 3-TC-312 TA3-312C LX2 $21.00

(9)

2003.109a Ziegler 2LX-367C Square Drive Tap Collet: 1/2" -N FL Tool 2-TC-367 TA2-367C LX2 $21.00 2003.110a Ziegler 2LX-429C Square Drive Tap Collet: 9/16" -N FL Tool 2-TC-429 TA2-429C LX2 $21.00 2003.111a Ziegler 2LX-480C Square Drive Tap Collet: 5/8" -N FL Tool 2-TC-480 TA2-480C LX2 $21.00 2003.112a Ziegler 2LX-590C Square Drive Tap Collet: 3/4" -N FL Tool 2-TC-590 TA2-590C LX2 $21.00 2003.113 Ziegler 2LX-500R Square Drive Reamer Collet: 1/2" Smooth Bore, 2-TC-500R $21.00 2003.114a Ziegler 3LX-1000C Square Drive Tap Collet: 1" x .764" Square FL Tool LX3 $30.00 2003.128 Buck 10" 3-Jaw Lathe Chuck: Synchronous Scroll 2-1/4" Thru Hole, Plain Back, USA $215.00 2003.129 10" 3-Jaw Synchronous Scroll Lathe Chuck: 2-1/8" Thru Hole Plain Back $170.00 2003.133 Chin-Yu 18" 4-Jaw Independent Lathe Chuck: 4" Thru Hole, D1-11 Camlock Spindle $640.00 2003.187 Brown & Sharpe #22 Collet Chuck Sleeve: 2-1/4" Large OD, 1-7/8" Sm OD 42-4464-99 $30.00 2003.188 25 Piece Lot of Assorted TG-100 (100-TG) Round Smooth Spring Collets $85.00 2003.190 7 Piece Lot of Hardinge Collets: #10 & 10Y Brown & Sharpe Automatic Lathe $60.00 2003.191a Command XCNA-1000 Collet Chuck Retention Nut: TG-100 (100-TG) Spanner Type $17.00 2003.228a~ Parlec C40-10SC3 TG-100 Collet Chuck: 3" Projection, CAT-40 Taper Shank $45.00 1910.044^ TSD Universal Acura-Flex 1/2" Capacity Collet Chuck: Kwik-Switch 100 Shank $40.00

(10)
(11)

Items will be released only when payment is received. All items are sold AS-IS, where-is, and with all faults. Seller assumes no responsibility for the use or misuse of any products sold, and liability shall be limited to the final sale value of an item. By signing up for this auction you agree to these terms and conditions. Lorain County, Ohio sales tax will be assessed on all items (6.75%). Buyer assumes responsibility for proving tax exempt status.

(12)

Payments will be made through the Aucto Payment Gateway. Paying via credit cards will only be available for orders under $5000.

(13)

Pickup is free and by appointment only. Call Mark at 440-258-3196 to make arrangements. Shipping, including freight, is also available. We ship UPS and USPS daily. All items available for sale can be shipped. Please contact us for options.

(14)

Payments will be made through the Aucto Payment Gateway. Paying via credit cards will only be available for orders under $5000.

References

Related documents

Payments by iforex com complaints or experience about forex trading platform from your personally identifiable information depth information share your date of india!. Results but if

Pre-operative lateral cephalogram Post-operative lateral cephalogram D IAGNOSIS : Class III malocclusion (underbite), maxillary anterior-posterior hypoplasia,.

No paid reviews Get concrete on Denny's real problems Customer service an support information File a complaint at ComplaintsBoardcom.. If you're 55 or church save some success

Try Scribd FREE for 30 days to access over 125 million titles without ads or interruptions. Start

80 TOP SELENIUM webdriver interview Questions for 5 years experience

To graph the PPF you can choose a production plan for Good 1 and find the amount of Good 2 that you can produce using the quantity of labor not used in the production of Good

Tomorrow will be partly sunny, with a high of about 60, but increasing clouds Tuesday night will bring rain and colder weather later in the week.. The chance of rain is 60 percent

Want to select aaa com insurance really covers can access your home insurance more reasons to select coverages, insurance coverage and are a treasure.. Milestone that go www