AutoCAD Drawing Standards

(1)

AutoCAD Layering Conventions

AUTOCAD LAYERING ٍٍSTANDARDS

Version 1.0

(2)

Acknowledgement

This Standard represents the extensive effort and support of many individuals within Public Works Authority. Technical Services Department expresses appreciation of the valuable assistance given by the Directors, Managers and Head of departments. Without the co-operation, the extensive work involved in compiling background information and preparing the standards would not be possible.

We would also like to place on record our appreciation of the assistance rendered to us by the coordinators and our respective staffs. Who also rendered valuable advice and guidance in bringing these standards to completion and in editing the text for publication.

Special thanks to

Director of Building Affairs Director of Drainage Affairs

(3)

Document Control

Version Date Modified by Agency Purpose

Version 1.0 March 5, 2007 Ashghal

Additions/Revisions

This standard is intended to be neither static nor all-inclusive and thus will be updated and enhanced as appropriate. Suggestions for improvements are strongly encouraged so that subsequent updates will reflect the input and needs the current format will undergo versioning or changes when new technologies become available. Addendum to these standards will be issued when such changes are made.

In general, changes to this standard shall occur because of three primary factors: 1) additional users and functionality; 2) discovery of, and subsequent fixing of latent errors and omissions; 3) changes to utilize advantage of more current technology and software versions. Therefore, it is reasonable to expect updates to this document. Users are cautioned to inquire about changes within. In order to ensure the reader is using the latest version, a revision date will be shown in the document control.

(4)

AutoCAD layering ٍٍSTANDARDS: Control and Authorization

The Standards are under Technical Services Department Management

Document Title : AutoCAD layering ٍٍStandards. Date : March 5th₂₀₀₇

Document Owner : ASHGHAL

Document Coordinator : Ibraiz Mohamed Khan

AutoCAD layering ٍٍSTANDARDS: Distribution

The Master or Original Version of the AutoCAD Layering ٍٍStandards is held electronically in ASHGALS Technical Services Department. The copy of these AutoCAD Layering ٍٍStandards will be available on our website (www.Ashghal.gov.qa or www.Ashghal.com) PWA department directorates, and Contracts Engineering and Business Affairs

AutoCAD Layering ٍٍSTANDARDS: Authorization and Change

These ٍٍstandards will undergo continuous reviews and updates, subject to change, by the Management of ASHGHAL. Any changes or updations that occur will be announced on our website (www.Ashghal.gov.qa or www.Ashghal.com).

(5)

Coordinators from the respective departments

Nasser Rashid Essa Al-kuwari Technical Services Department Ibraiz Mohamed Khan Technical Services Department Chandrakant Pawar Technical Services Department Abdul Khaliq Technical Services Department Hassan Al Sadig Technical Services Department Abdulla Ahin Roads Affairs

Mario Domingo Roads Affairs Yasser Noor Drainage Affairs Mustafa Mughrabi Drainage Affairs Sameh Mousa Town Beautification Fouad Frangieh Town Beautification Wael Mohd Abdul Salam Building Affairs

(6)

Ashghal Technical Services Department aims to service all the departments within Ashghal, outside government organizations and public organizations. It has recognized that all work flow have some common characteristics, enabling them potentially to achieve a level of interoperability through the use of common standards for various functions. Ashghal - EIS have initiated to identify these functional areas and develop appropriate specifications for implementation of AutoCAD layering ٍٍSTANDARDS. It is intended that such standards and specifications will enable interoperability between heterogeneous workflow and improved integration of workflow, thereby improving the opportunities for the effective use of workflow process within Ashghal and the outside domains.

Ashghal is committed however to enforcing the standards of information delivery that insures predictability and the ability to easily reuse information. As a result these AutoCAD layering ٍٍSTANDARDS will be included as part of the contractual requirement for delivery of digital information to Ashghal

These standards describe AutoCAD layering ٍٍSTANDARDS to be adopted on projects from design to construction.

1.1 Objective

The purpose these standards are to promote compatibility and interchange of digital spatial data between Ashghal and the clients. This will facilitate seamless integration between AutoCAD and Geographic Information System and, to assist those responsible for incorporating this disparate data into GIS to ensure easier data translation, common language, ease of data storage, common medium of information exchange, drawings and data can be transferred and integrated with other applications, drawings and data created for one particular project or project discipline are compatible with those for others.

(8)

1.2 Scope

The scope of this document is to provide guidelines and procedures for adopting AutoCAD layering standards in preparing design and As-built drawings, where these drawings will be automated to GIS. These standards address layer assignments, standard symbology, layers, layer names, attributes to each feature, templates, color usage associated with line widths for all mechanical, electrical, structural, architectural drawings associated with buildings, roads, drainage and city beautification drawings.

1.3 Users

The intended users of this Auto CAD layering ٍٍStandards are anyone who is going to be involved in design or construction projects for Ashghal, including the Ashghal staff, consultants, contractors, Sub Contractors, Construction companies, Project engineers, Discipline engineers and draftsperson

2 Definitions and Acronyms

ABD Abandon

AR Architectural

As-BUILT Measured and revised drawings documenting the Full extent of completed works.

AutoCAD AutoCAD 2006 or later

B Building

BA Building Affairs C Construction

CAD Computer Aided Drafting CON Continuous

CTRL Control

D Drainage

DA Drainage Affairs

DE Design

DWG Default AutoCAD drawing file format E Electrical

EIS Engineering Information System Ex Existing

(9)

G Gas

GIS Geographic Information System

HID Hidden

Layout Defined drawing space in AutoCAD for placing Title sheets etc.

Me Mechanical

Model Space Defined drawing space in AutoCAD.

O Oil

PPLN Policy Plan Pr Proposed

PWA Public Works Authority QNG Qatar National Grid RA Road Affairs RD Roads SEW Sewer ST Structural T Telephone TB Town Beautification

TBi Town Beautification Irrigation TBL Town Beautification Landscaping TSD Technical Services Department U Presentation and Plans

W Water

XREF An external drawing file that is referenced into the main drawing

Z Core layers .

3 Guidelines

These AutoCAD layering ٍٍstandards (see Appendixes) are to be applied for all the projects concerning “design” and “As-built” projects.

Through out this document the use of the name AutoCAD implies “AutoCAD release 2006” unless otherwise specified.

“As-Built” drawings include design & detail changes that may have taken place after the initial issue of construction documents, as well as changes made to the actual facility during construction

(10)

The drawings will be electronic using the AutoCAD version 2006. All CAD drawings are to be drawn using an AutoCAD program capable of reading and writing drawing files in AutoCAD “DWG” format without conversion.

Ashghal will provide consultants and contractors an AutoCAD template (see fig 2.0 as an example) on a CD- ROM with project boundaries containing policy plan and topographic features as base map (site Plan) which are geo referenced as per QNG (Qatar National Grid). All the features of the projects must be drawn onto that template only.

It is the responsibility of the client to organize drawing information coherently as mentioned in the standard and maintain reasonable file size

4 General Requirements

4.1 Conditions of Compliance

All Consultants and contractors are required to meet the specifications of the AutoCAD layering ٍٍStandards set by Ashghal, as part of their conditions of engagement.

In the AutoCAD template provided the user shall use the specific layering ٍٍSTANDARDS by selecting which ever layer is applicable for the feature / entity by switching “on” the necessary layers.

• The Cad files provided will be in AutoCAD 2006 file format.

• Fonts and line types are to be followed as provided in this manual. • Plot style table Is to be maintained as provided in this manual • No external reference to be used.

(11)

• Files shall be purged.

• Drawing features / entities should be in model space. • The color and linetype of each entity is drawn BYLAYER..

• All fonts used in the AutoCAD files shall be SHX type font. True type fonts will not be accepted. If text is used to represent an object then the insertion point must be “middle center” justified. In the standards all the text is mentioned as continuous.

• All polygons shall be closed polylines.

• File name should accurately be named to identify it is a design or As-built project

• Do not place entities on layer 0.

• File size should be within reasonable limits. 4.2 Standards for Attribute data

1. All attribute information features must be provided as Extended Entity Data (EED / XDATA) or OBJECT DATA for polyline features.

2. The Required Feature Attribute Table Fields associated with the corresponding layer are mentioned in the appendices. For example,

FEATURE NAME LAYER NAME DESCRIPTION FEATURE TYPE REFERENCE ATTRIBUTE Flush Kerb RD_EX_KBFL Existing Road

Feature: Flush Kerb

Polyline 4

3. The Template provided by Ashghal does not contain the fields for the layer, so the contractor must add ALL the fields as mentioned in the attribute table for the particular layer.

4. All the relevant information associated to the feature must be completely filled as per the lookup table provided herein. For example

(12)

Attributes 4: (Kerb)

FIELD NAME DESCRIPTION FIELD

TYPE WIDTH FIELD VALUE Proj-Num Project Number C 6

Zone # Zone Number N 3

Code Feature Code C 6 KERB Kerb Concrete edging

between pavement and carriageway C 2 SK = Standing Kerb RK = Raised Kerb DK = Drop Kerb FK = Flush Kerb

4.3 Plans Submittal requirements and procedures 1. Site plan or Floor plan

The Floor Plan or Site Plan must include: A. Building outline with dimensions. B. Interior partitions(s) with dimensions.

1. Label all rooms and spaces as to use.

2. Label all rated walls and partitions - exterior and interior. C. Show all openings in interior and exterior walls.

D. Show opening in floor/ceiling assemblies with dimensions. 2. Elevation drawings

A. Elevation drawings are required on all construction and include alterations or additions to the exterior of building or structures. B. The elevation drawings are orthographic drawings (a single view of

an object done with perpendicular lines or right angles) of the

exterior of a building, road, drainage or structure. Show the design, materials, dimensions and final appearance of the exterior of a building or structure. Including doors, windows, roof style, overhang, dimension height and width, and grade line.

(13)

3. Sectional Drawings

Sectional drawings are required on all internal construction of a building, or structure and also where ever applicable for drainage and roads features.

A. Structures will require a drawing prepared for the entire structure (full section).

B. All projects will require drawings for specific parts of the building, roads or drainage (detail sections).

C. Sections should expose the size and shape of building materials and components not revealed on floor plans.

D. Detail sections should include

1 Vertical wall section exterior – show the material and

dimensions of material used to construct the wall. Including exterior wall covering.

2 Vertical wall section interior – show the material and dimensions of material used to construct the wall.

3 Footing section – show the width and length of the footing, the type material used and the position of the foundation wall on the footing and dimension of foundation wall. Detail any change in elevation (i.e. step-downs).

4 Sill section – show how the foundation supports and intersects with floor system and the outside wall. Anchor bolts should be addressed in sill section.

5 Beam details – show how the floor system is supported by beam and how columns or foundation walls support the beam. 6 Cornice section – show the relationship between the outside

(14)

7 Stairway section – show the dimensions of treads and risers and includes handrail detail.

NOTE: Site Plan or Floor Plan and Elevation Plans are to be geo referenced.

5 Available Information

Ashghal provides base map (Site Plan) with Policy Plan, Roads networks and Coastline in model space with project location and project boundaries. (See Figure.1.0).

Example of an AutoCAD template

(15)

• Project boundaries are drawn as polylines. All area polylines shall be closed (Note: project limits are roughly drawn and must not be used for final calculations of quantities or alignments).

• Information which can be used as reference data in carrying out project. The following entities are included in the table below.

Feature Layer Name Attribute Data 1 Control Points GIS_CTRL Full details

(e.g., station name, E,N, height, accuracy ratings, Etc)

2 Policy Plan GIS_PPLN None

3 Zone GIS_ZONE None

4 Streets GIS_RD00-03 None 5 Coastline GIS_CSTL None

• All elements are in two coordinates(X, Y,) except for control point which is in (X, Y, Z). Where ever applicable benchmarks/control points are shown, the coordinates and mapped points of these control points must be submitted with the final work. The control points are placed in stable areas where there is a little chance of them being destroyed.

• Standards to be used or adhered in the preparation of design and as-built project drawings:

o Drawing layout – dimension, title box details, etc. o Standard symbols, line types and annotations/labels

o Layering ٍٍStandards (see detailed layering ٍٍStandards In Appendix 8.0 )

(16)

5.1 Layer Manager

Layering ٍٍstandards are classified in the layer manager as layers (see figure 2.0 as an example) The users shall select the layers for the appropriate feature / entity which has layer name, linetype, color, line weight. All possible attribute data for each feature / entity is also provided. (See appendixes)

(17)

5.1.1 Layer Name Layout

The methodology in defining Layer name is mentioned below

Field 1 = Department designator Field 2 = Status / Section Designator Field 3 = Feature / Entity Designator

Department designator is the primary field which identifies the department. The status or section field differentiates proposed or existing stage of the project. The Feature designator signifies the features name.

For Example see below tables. Layer Name Line

Type

Line Wt Acad Color Usage D_Ex_SEW _ABD A 0 0.18 30 Abandon sewer

line D = Department

Ex_SEW = Section / status ABD = Feature

Layer Description Color Line Type

B_AR_ACCESS Main Gate RED Continuous B = Department

AR = Section ACCESS = Feature

Layer Description Color Line Type Thickness Symbol TB_L_ Trees Tress large & small Black

TB = Department L = Section Trees = Feature

Layer Description Color Line Type RD_De_KBDR Design road Feature: Dropper Kerb Green Hidden RD = Department

De = Status KBDR = Feature

(18)

5.2 Location Map, Direction and Scale

All the necessary project details are provided on the paper space template with Location Map, arrow showing the North direction and Scale. (See Figure 3.0)

(19)

5.3 Legends

Lists of legends are listed in the template which is available (see figure 4.0)

(20)

5.4 Details content Title Block (see figure 5.0)

• PWA Block. • Consultant Block • Contractor Block, • Project title • Project Code • Sheet Contents, • Scale • Date, • Project Coordinator, • Drawing number

• Project concerned department

(21)

6 Coordinate Systems

Coordinates used are in meters based on the Qatar National Grid (QNG), which is a Transverse Mercator Projection (See table below):

Central Meridian 51° 13' 00" E Scale Factor at the Central

Meridian 0.99999

Location of the Origin 51° 13' 00" E 24° 27' 00" N False Easting of the Origin 200,000 m

False Northing of the Origin 300,000 m

Reference Spheroid International (Hayford)

The vertical datum is the Qatar National Datum, which is defined by mean sea level in Doha

7 Precision

Coordinates are stored in double precision (15 significant digits). Given the coordinate system defined above, all Easting and Northing will carry 6 digits before the decimal. Thus, the coordinate resolution (precision) for vector data is 9 significant digits after the decimal1.

(22)

8 Data Submission Standards

These guidelines are to be observed and followed by all the users who submit the AutoCAD files to Public Works Authority ‘Ashghal’ for Design, and As-built drawings. They are intended to support and maintain uniformity.

Note: All drawing files must conform to the AutoCAD layering standards set forth in this document.

Clients will submit to Ashghal a complete set of the project in Electronic form. These must include all the supporting files and must be delivered as follows. File may be submitted to Ashghal digitally using one of the following methods. • On CD – RW disks.

Disk media should be packed into a container for ease of handling and storage and protected against damage during handling.

• Disk media Both the CD-ROM case and the CD-ROM itself shall be labeled with.

The project name and number

Short description of the media content i.e. As-Built, detail drawings, shop drawings etc

The name, address, and phone number of the Consultant etc The name of the project Manager

The date of issue of the disk Date of submittal

Virus Scanned (date & software used) Media Number: x of xx

• An index file (in Microsoft Word format) describing the contents of the submission shall be provided. The index – file should include:

The project name and number

The name, address and phone number of the consultant.

The name of the Ashghal project manager for that particular project The date of issue of the submission

The project code (alphanumeric as above)

• The index shall be comprised of a table with one row for each AutoCAD file in the submission.

The column should represent: The name of the AutoCAD file.

The name of the compressed file in which the file is contained (if applicable).

(23)

The disk on which the AutoCAD (or compressed) files can be found (if applicable).

The project code as assigned to the consultant or contractor by Ashghal.

The title of the drawing as it appears in the title block The date of issue of the drawing.

• If the submission comprises more than one disk, the same index file should accompany each disk. A printed version of the index should accompany the transmittal.

• Each AutoCAD file must be in AutoCAD “DWG” format. DXF format is not acceptable.

Clients shall submit in the disk media all the files in a directory structure as follows

Folder: As-built drawing (GIS AutoCAD template) Folder: Details drawings

Folder: Documents

As-built: The Final As-Built drawings will reside

Detail Drawings: All other detailed drawings related to that particular project will reside

Documents: Project related Word or PDF documents will reside

As-Built Detail Drawings Documents Project Number

(24)

9 Contact :

Clients shall direct their comments, queries or any additional training needs regarding these AutoCAD layering standards to

Public Works Authority - Ashghal

Technical Services Department Engineering Information System Nasser Rashid Essa Al-kuwari Tel No : 4950500

Ibraiz Mohamed Khan Tel No: 4950174

(25)

10 Appendix 1.0 - Layering ٍٍStandards - Building Mechanical

Building

Layer Name Line _type _weightLine Color Symbol Description B_HVAC_AHU CON Default 140 NA Air Handling Unit B_HVAC_CH CON Default 140 NA Chiller Unit B_HVAC_C_P CENTER Default 138 Chiller Pipe

B_HVAC_CHP CON Default 137 NA Chilled Water Pumps

B_HVAC_CiP CON Default 137 NA Circulating Pumps B_HVAC_Cond HIDDEN Default 132 NA Cond drain pipe

B_HVAC_DAC CON Default 137 NA Standard Air Conditioning

Details

B_HVAC_DDC CON Default 138 NA Direct Digital Control of Building System

B_HVAC_DG CON Default 138 NA Door Grill

B_HVAC_DIM CON Default 132 NA HVAC Dimension B_HVAC_Duct CON Default 139 NA Main Duct

B_HVAC_EF CON Default 138 NA Extract Fan B_HVAC_Edu CON Default 132 NA Exhaust Duct B_HVAC_ExD HIDDEN Default 133 NA Existing Duct B_HVAC_FD CON Default 132 NA Floor Drain

B_HVAC_Fs CON Default 132 NA Air Conditioning Fittings

B_HVAC_FlD CON Default 132 NA Flexible Duct

B_HVAC_nAC CON Default 137 NA Standard Note Air Conditioning

B_HVAC_OP CON Default 139 NA Access Opening B_HVAC_RD CON Default 137 NA Return Diffuser B_HVAC_ReP HIDDEN Default 139 NA Refrigerant Pipes B_HVAC_RG CON Default 137 NA Return Grille B_HVAC_SD CON Default 137 NA Supply Diffuser B_HVAC_SG CON Default 137 NA Supply Grille

(26)

Building

Layer Name Line type

Line

weight Color Symbol Description Conditioning

B_HVAC_Dm CON Default 137 NA Dummy Diffuser B_HVAC_VAV CON Default 137 NA Variable Air Volume B_HVAC_BMS CON Default 137 NA Building

Management System

B_HVAC_DDC CON Default 137 NA Direct Digital Control of Building

System B_HVAC_FCU CON Default 137 NA Fan Coil Unit B_HVAC_ILF CON Default 137 NA Inline Fan B_HVAC_VCD HIDDEN

2 Default 132 NA Volume Damper Control B_HVAC_TXT CON Default 137 NA Air Conditioning

Text

B_HVAC_WAC CON Default 140 NA Window Air Conditioning

B_HVAC_ED CON Default 138 NA Extract Diffuser B_MeD_CP CON Default 138 NA Catch Pit

B_MeD_Det CON Default 132 NA Standard Drainage details

B_MeD_DIM CON Default 131 NA Standard Drainage dimensions

B_MeD_eDRL HIDDEN Default 134 NA Existing Drainage layout internal

B_MeD_eHT HIDDEN Default 135 NA Existing holding tank

B_MeD_eST HIDDEN Default 135 NA Existing Septic Tank

B_MeD_ESVC CON Default 139 NA External drainage piping

B_MeD_FD CON Default 138 NA Floor Drain B_MeD_FG CON Default 138 NA Floor Gully B_MeD_HT CON Default 139 NA Holding Tank

B_MeD_MH CON Default 140 NA Manhole internal within the perimeter of the building

(27)

Building

Line

weight Color Symbol Description drawings

B_MeD_pDRL HIDDEN Default 134 NA Existing drainage layout internal

B_MeD_pMH HIDDEN Default 134 NA Proposed manhole internal

B_MeD_pST HIDDEN Default 134 NA Proposed Septic tank

B_MeD_RSA CON Default 139 NA Rain water soakaway

B_MeD_SAAC CON Default 137 NA Air-Conditioning soakaway B_MeD_SP CON Default 137 NA Sump pumps

B_MeD_SSA CON Default 139 NA Septic tank soakaway

B_MeD_ST CON Default 139 NA Septic tank

B_MeD_TXT CON Default 137 NA Standard drainage text

B_MeD_UPVC CON Default 138 NA Internal drainage piping

B_MeP_CWS CON Default 138 NA Cold Water Supply

B_MeP_EWH CON Default 140 NA Electric Water Heater

B_MeP_EWT CON Default 140 NA Elevated Water Tank

B_MeP_eEWT HIDDEN Default 135 NA Existing Elevated Water Tank

B_MeP_eFP CON Default 135 NA Existing Fire Pumps

B_MeP_eGWT HIDDEN Default 135 NA Existing Ground Water Tank

B_MeP_eIWS CON Default 135 NA Existing Internal Water Supply

B_MeP_eMWS DIVIDE Default 135 NA Existing Main Water Supply

B_MeP_eRWT HIDDEN Default 135 NA Existing Roof Water Tank

B_MeP_eWME HIDDEN Default 137 NA Exiting Water Meter Enclosure

B_MeP_eWP CON Default 135 NA Existing Water Pumps

(28)

Building

Line

weight Color Symbol Description B_MeP_FF CON Default 132 NA Fire Fittings B_MeP_GWT CON Default 140 NA Ground Water Tank B_MeP_DIM CON Default 132 NA Plumbing

Dimension B_MeP_HWR DASHDO

T Default 138 NA Hot Water Return B_MeP_HWS HIDDEN Default 138 NA Hot Water Supply B_MeP_PF CON Default 132 NA Plumbing Fittings B_MeP_RWT CON Default 140 NA Roof Water Tanks B_MeP_SN CON Default 131 NA Sprinkler Nozzle B_MeP_SBL CON Default 138 NA Sprinkler Branch

Pipe

B_MeP_SMPL Center Default 140 NA Sprinkler Main Pipe Line

B_MeP_TXT CON Default 137 NA Standard Plumbing Text

B_MeP_VC CON Default 138 NA Valve Chamber B_MeP_WME CON Default 140 NA Water Meter

Enclosure

(29)

11 Appendix 2.0 - Layering ٍٍStandards – Building Structural

Building

Layer Name Line _type _weightLine Color Symb_ol Description B_ST-Grids Center2 Default 8 NA Grid Line B_ST-Grids

Text CON Default Green NA Grids Text

B_ST-Circle CON Default Red NA Slab Thickness Circle

B_ST-Columns CON Default Green NA Columns

B_ST-Column SC

CON Default Green NA Stub Column

B_ST-Column PC

CON Default Green NA Planted Column

B_ST-Footings

CON Default White NA Footings

B_ST-Blinding

CON Default Magenta NA Blinding B_ST-Bitu Hidden2 Default Green NA Bitumen

B_ST-Polythene

CON Default Red NA Polythene Sheet B_ST-Plan CON Default Magenta NA Plan

B_ST-Beams CON Default Magenta NA Beams B_ST-Steps CON Default Magenta NA Stairs B_ST-Reinf 1 CON Default Blue NA Reinf B_ST-Reinf 2 CON Default Green NA Reinf B_ST-Reinf C CON Default Magenta NA Cross Reinf B_ST-Bott

Reinf

CON Default Green NA Bottom Reinf B_ST-Top

Reinf

Hidden2 Default Green NA Top Reinf B_ST-Section

1 CON Default Magenta NA Sections B_ST-Section

2 CON Default Magenta NA Sections B_ST-Steel

Col

CON Default Magenta NA Steel Columns B_ST-Steel CON Default Magenta NA Steel Beams

(30)

Building

Layer Name Line type Line weight Color Symb ol Description Beam

B_ST-Rafter CON Default Magenta NA Rafter B_ST-Plates CON Default Magenta NA Plates B_ST-Angels CON Default Magenta NA Angels B_ST-Welds CON Default Magenta NA Welds B_ST-Purlins CON Default Magenta NA Purlins

B_ST-Sheeting

CON Default Yellow NA Sheeting B_ST-Ribs Hidden2 Default 8 NA Ribs B_ST-Mesh CON Default Green NA Mesh Reinf B_ST-Bolts CON Default Red NA Bolts

B_ST-Hatch

1 CON Default Red NA Hatch B_ST-Hatch

2 CON Default Cyan NA Hatch

B_ST-Col-H CON Default 9 NA Column Hatch B_ST-Solid CON Default 253 NA Solid

B_ST-Text 1 CON Default White NA Text B_ST-Text 2 CON Default Green NA Text B_ST-Beam

Text

CON Default White NA Beam Text B_ST-Slab

Text

CON Default White NA Slab Text B_ST-Col

Text CON Default Green NA Columns Text B_ST-Foot

Text CON Default Green NA Footings Text B_ST-Dim CON Default Red NA Dimensions B_ST-Dim L CON Default Red NA Dim Leader B_ST-Dim C CON Default Red NA Dim Columns B_ST-Dim F CON Default Red NA Dim Footings B_ST-Dim

Slab

CON Default Red NA Dim Slabs B_ST-Dim

Beam

CON Default Red NA Dim Beams B_ST-Dim

Sect CON Default Red NA Dim Sections B_ST-Level 1 CON Default Magenta NA Level in plan

(31)

Building

Line

weight Color

Symb

ol Description B_ST-Level 2 CON Default Magenta NA Level in Sections

B_ST-Boulders

CON Default Red NA Boulders

B_ST-Concrete

CON Default Red NA Concrete B_ST-Sand CON Default Red NA Sand B_ST-Block

Work

CON Default Red NA Block Work B_ST-Earth CON Default 8 NA Earth B_ST-Sect

Mark CON Default Magenta NA Section Mark in Plan B_ST-Hidden Hidden2 Default Red NA Misc Hidden Line B_ST-Grid

Circle

CON Default Yellow NA Grid Circle B_ST-Notes CON Default Magenta NA Notes B_ST-Wall CON Default Magenta NA Walls

(32)

12 Appendix 3.0 - Layering ٍٍStandards – Building Electrical

Building

Layer Name Line _type _weightLine Color Symbol Description B_E-LF CON Default White NA Light Fittings B_E-SL CON Default White NA Light Fittings &

E.FAN switches

B_E-LFCL CON Default Yellow NA Light Fittings control line

B_E-CL dashed Default Yellow NA Elect. Circuit line B_E-POWER CON Default White NA All low power+ AC

outlets, isolators

B_E-FCO CON Default Magenta NA Flexible cable outlets

B_E-WH CON Default Magenta NA Elect. Water heaters

B_E-CCU CON Default Magenta NA Elect. Cooker control unit

B_E-EXF-CF CON Default Magenta NA Elect .Extract fans, ceiling fans

B_E-CBPB CON Default Cyan NA Elect. Call bell & push button

B_E-MSCR center Default Green NA Main & sub-main câbles routes

B_E-LEGEND

CON Default White NA Electrical symbols B_E-GNT CON Default Yellow NA Electrical general

notes/text

B_E-LFSMR CON Default Yellow NA Light fittings schedule/Model

reference

B_E-MSB-DB CON Default White NA Electrical main switch or distribution board

B_E-DBB CON Default Red NA Electrical

Distribution Board Block

B_E-DBD CON Default Yellow NA Electrical

Distribution Board Details

(33)

Building

Line

weight Color Symbol Description B_E-SLD CON Default White NA Electrical single line

diagram

B_E_SPST dashed Default White NA Small power skirting, trunking

B_E-CTR dashed Default Blue NA Electrical cables tray route

B_E-CTGR center Default Blue NA Electrical cables trunking route

B_E-CPANEL CON Default Cyan NA Electrical cubical panel

B_E-BBR CON Default Magenta NA Electrical bus bar riser

B_E-CD center Default White NA Cable ducts

B_E-MH CON Default Cyan NA Electrical manhole B_E-CP CON Default Blue NA Electrical control

panels

B_E-CJB CON Default Yellow NA Electrical cables junction box

B_F-HSD CON Default White NA Fire heat & smoke detectors

B_F-ETS CON Default Green NA Fire extinguishers B_F-AB-CP CON Default Red NA Fire Alarm bell &

call point

B_F-AMP CON Default Green NA Fire Alarm Main panel

B_F-HR CON Default White NA Fire Hose reel B_F-MDS dashed Default White NA Fire Main dry riser B_F-SPLER CON Default Cyan NA Fire Sprinklers B_F-ES CON Default Magenta NA Fire Exit sign

B_F-RSCD CON Default Red NA Fire resisting self closing

doors

B_F-EM-L CON Default Green NA Fire Emergency lights

B_F-BK CON Default White NA Fire Blanket

B_F-EL CON Default Magenta NA Fire Escape ladder

B_F-GNT CON Default Yellow NA Fire General notes/text

(34)

Building

Line

weight Color Symbol Description B_F-CJB CON Default Blue NA Fire Cables junction

box B_PA-SPK CON Default white NA Speakers B_PA-APF CON Default Green NA Amplifier B_PA-MIC CON Default Magenta NA Microphone B_PA-MIX CON Default Green NA Amplifier Mixer B_PA-CPR CON Default Cyan NA Cassette

player/Radio

B_PA-GNT CON Default Yellow NA P.A System General notes/text

B_PA-VC CON Default Red NA P.A System Volume control

B_PA-SC dashed Default White NA P.A System cables B_PA-CJB CON Default Blue NA P.A System cables

junction box

B_L-LIEP CON Default White NA Lightning inspection earth pit

B_L-LCTR dashed Default Green NA Lightning conductor B_L-LPETP CON Default Red NA Lightning protection

Earth test point B_L-LER CON Default Yellow NA Lightning earth rod B_L-LGNT CON Default Yellow NA Lightning General

notes/text B_CCTV-CA CON Default White NA CCTV Camera

B_CCTV-OC CON Default Green NA CCTV Object Censor

B_CCTV-M CON Default Magenta NA CCTV Monitor B_CCTV-R CON Default Green NA CCTV Recorder

B_CCTV-VR CON Default Cyan NA CCTV Video Display & Recorder

B_CCTV-MP CON Default Yellow NA CCTV Main control panel

B_CCTV-GNT

CON Default Yellow NA CCTV General notes/text

B_CCTV-SC center Default White NA CCTV

System cables B_CCTV-CJB CON Default Blue NA CCTV Cables

junction box

(35)

Building

Line

weight Color Symbol Description

MDD detector devices

B_CCTV-SAC

CON Default Magenta NA CCTV

Security Access control panel

B_CCTV-PGB CON Default White NA CCTV Car parking gate barrier B_TV-CCO CON Default White NA TV Coaxial cable

outlet

B_TV-CDA CON Default Green NA TV/Cable/Dish Antenna

B_TV_GNT CON Default Magenta NA TV General Notes / Text

B_TV-SP CON Default Magenta NA TV splitter

B_TV-CJB CON Default Blue NA TV cables junction box

B_TV-SC Dashed Default White NA TV system cables

B_TV-SDB CON Default Green NA TV system Distribution Board

B_TV-CR CON Default White NA TV cables Riser

B_TEL-CT DASH Default Yellow NA Telephone cable trays

B_TEL-O CON Default White NA Telephone outlets B_TEL-MJB CON Default Green NA Telephone main

junction box

B_TEL-BWL Center Default Yellow NA Telephone block wiring line

B_TEL-R CON Default Magenta NA Telephone Riser

B_TEL-ADTS CON Default Cyan NA Access to Development for

tel. service B_TEL-BL CON Default Green NA Building layout B_TEL-BLP CON Default Yellow NA Boundary layout of

the plot

B_TEL-PSD CON Default Red NA Plot’s GIS sheet data

B_TEL-MID Center Default Magenta NA Q.tel main incoming Duct

B_TEL-PABX CON Default Blue NA Q.tel main PABX B_TEL-GNT CON Default Yellow NA Q.tel

(36)

Building

Line

weight Color Symbol Description General notes/text B_TEL-MHJB CON Default White NA Telephone

manhole/joint box B_COMP-CT HIDDE

N

Default Yellow NA Computer Cable trays

B_COMP-PI CON Default White NA Computer point individual

B_COMP-POB CON Default Green NA Computer+Tel+power outlet box

B_COMP-PUF Dashed Default Magenta NA Computer+Tel+powe under. floor trunking

B_COMP-MS CON Default Green NA Computer main server

B_COMP-GNT

CON Default Yellow NA Computer general notes/text

B_COMP-CJB

CON Default White NA Computer junction box

B_COMP-SCR

Center Default White NA Computer system cables route

(37)

13 Appendix 4.0 - Layering ٍٍStandards - Building Architectural Features

Building

Layer Name Line _type _weightLine Color Symbol Description B_AR_ACESS CON Default Red NA Main Gates

B_AR_ACESR CON Default Red NA door stopper, roll holder, coat hooks, soap tray etc.

B-AR_BEXST CON Default 31 NA Existing Buildings B_AR_BPROP CON Default Green NA Proposed Building B_AR_BFUTR Hidde

n2

Default Yellow NA Future Building

B_AR_BWALL CON Default Yellow NA Boundary wall or Fence

B_AR_CARS CON Default Cyan NA Car blocks in Plans or Elevations

B_AR_COL CON Default Yellow NA Column Positions in Architectural Plans B_AR_C-SHD CON Default 253 NA Column Hatch B_AR_DTLS CON Default Green NA Architectural

Details

B_AR_DIM CON Default Cyan NA Dimension for Plan, Elevation, Section &Detail

B_AR_DOORS CON Default Red NA Door Blocks

B_AR_DTAGS CON Default Yellow NA References for Door Elevations, Detail & Schedules B_AR_ELEV1 CON Default White NA Nearest Elevation

View

B_AR_ELEV2 CON Default Magenta NA Second Elevation View

B_AR_ELEV3 CON Default Yellow NA Third Elevation View

B_AR_ELEV4 CON Default Red NA Fourth Elevation View

B_AR_ELEV5 CON Default Cyan NA Fifth Elevation View B_AR_F-SAN CON Default Red NA Sanitary fittings for

Toilet Blocks, Baths & Kitchens

(38)

Building

Line

weight Color Symbol Description

B_AR_F- LTS CON Default Red NA Showing light Positions in Architectural Plan

B_AR_FURN CON Default Cyan NA Furniture Layout

B_AR_FRFIN CON Default Yellow NA Floor Finishing Schedule & Descriptions

B_AR_GRIDS Cente r2

Default Cyan NA Grid Lines B_AR_GDNOS CON Default Yellow NA Grid References

B_AR_HATCH CON Default Red NA Different Hatch Patterns

B-AR_H-SLD CON Default 253 NA Solid Hatch Pattern B_AR_HIDN Hidde

n2

Default Red NA Show all dotted lines

B_AR_ILOCK CON Default 14 NA Paving tiles (Interlock)

B_AR_K-STN CON Default Red NA Kerb Stone Layout B_AR_L-GRN CON Default 96 NA Green Area (Grass

etc.) B-AR_L-SRB CON Default 96 NA Shrubs B_AR_L-TRS CON Default 96 NA Trees

B_AR_LGNDS CON Default Yellow NA Legends, Symbols References etc.. B_AR_PRCL Cente

r2

Default Green NA Policy Plan B_AR_PARKG CON Default Cyan NA Parking Area

B_AR_PEL CON Default Cyan NA People Blocks in Plans or Elevations B_AR_PLAN CON Default White NA Floor Plans

B_AR_STAIR CON Default Yellow NA Stair Case & Steps in Plan

B_AR_CEILG CON Default Cyan NA Reflecting Ceiling Plan

B_AR_IMAGE CON Default Cyan NA Place For Images B_AR_ROOF1 CON Default Magenta NA Highest Level For

Roofing

B_AR_ROOF2 CON Default Yellow NA Second Level For Roofing

(39)

Building

Line

weight Color Symbol Description Roofing

B_AR_ROOF4 CON Default Cyan NA Fourth Level For Roofing

B_AR_SECT CON Default White NA Architectural Sections & Details B_AR_S-EL1 CON Default Yellow NA Nearest Elevation

in Sections

B_AR_S-EL2 CON Default Red NA Far Elevation in Sections

B_AR_TEXT1 CON Default Magenta NA Title, References Text etc..

B_AR_TEXT2 CON Default Yellow NA Labeling Text B_AR_T-NTS CON Default Yellow NA General Notes B_AR_T-CRD CON Default Yellow NA Coordinates Text B_AR_T-LVL CON Default Yellow NA Floor, Elevation or

Section Levels B_AR_TILES CON Default 8 NA Floor Tiles B_AR_URBAN CON Default Cyan NA GIS Data B_AR_WNDO

W

CON Default Red NA Window Blocks

B_AR_WTAGS CON Default Yellow NA References for Window Elevations,

Details & Schedules

(40)

14 Appendix 5.0 - Buildings Attributes

Buildings – Mechanical, Electrical, Structural, Architectural Feature

Name

Layer Name Description Feature Type

Reference Attribute Buildings B-AR_BEXST Existing Buildings Polyline 1 Buildings B_AR_BPROP Proposed

Buildings

Polyline 1 Buildings B_AR_BFUTR Future Buildings Polyline 1 Elevation B_AR_ELEV Elevations Polyline 2

Roofing B_AR_ROOF Roofing Polyline 3 Sections B_AR_SECT Sections Polyline 4 Accessories B_AR_ACESR Accessories like

door stopper etc

Polyline 5 Doors B_AR_DOORS Doors fixtures Polyline 6 Sanitary B_AR_F-SAN Sanitary fittings Polyline 7 Lighting B_AR_F-LTS Light Fittings Polyline 8 Furniture B_AR_FURN Furniture Polyline 9

Parking B_AR_PARKING Vehicle Parking Polyline 10 Windows B_AR_WINDOWS Windows Polyline 11

Walls B_AR_WALL Walls Polyline 12 Columns B_AR_C-SHD Columns Polyline 13

Steps B_AR_STEPS Stair case and

Ramps Polyline 14 Tiles B_AR_TILES Floor Tiles Polyline 15 Columns B_ST-COLUMNS Columns Polyline 13

Circle B_ST-CRICLE Slab thickness Polyline 16 Steps B_ST-STEPS Stair case and

ramps

Polyline 14 Blinding B_ST-BLINDING Blinding Polyline 13

Angles B_ST-ANGLES Angles Polyline 18 Columns B_ST-Column_ST Stub column Polyline 13 Columns B_ST-Column_PC Planted Column Polyline 13 Footings B_ST-Footings Footings Polyline 13

Rafter B_ST-Rafter Beams Polyline 13 Purling B_ST-Purlins Bolts Polyline 13

Levels B_AR_T-LVL Level of Floors Polyline 21 Block Work

B_ST-BLOCKWORK

Block Works Polyline 22

Wall B_ST-WALL Walls Polyline 12 Lighting B_E_LF Light Fittings Polyline 8

(41)

Feature

Name Layer Name Description Feature Type ReferenceAttribute Power B_E-POWER Low Power

outlets, Ac outlets, isolators

Polyline 24

Fans B_E_EXF-CF Exhaust fans, Ceiling Fans

Polyline 43 Switch Board B_E_MSB-DB Main Switch Board

or Distribution Board Polyline 25 Distribution Board B_E_DBB Electrical Distribution Board Block Polyline 26

Cable ducts B_E_CD Cable ducts Polyline 27

Manhole B_E_MH Manhole Polyline Ref Roads Detectors B_F-HSD Fire Heat and

Smoke detectors

Polyline 28 Extinguishers B_F-ETS Fire Extinguishers Polyline 29

Bell B_F-AB-CP Alarm bell and call

Point Polyline 30 Alarm B_F-AMP Fire Alarm Main

Panel

Polyline 31 Sprinkler B_F-SPLER Fire Sprinklers Polyline 32

Lighting B_F-EM-L Fire Emergency Light

Polyline 33 Air Handling

Unit B_HVAC_AHU Air Handling unit Polyline 39

Chiller B_HVAC_CH Chiller Unit Polyline 40 Floor Plan B_AR_PLAN Floor plan Polyline 40.1

Pipe B_HVAC_ChP Chilled Pipe Polyline 41 pump B_HVAC_CHP Chilled water

pump

Polyline 42 Pump B_HVAC_CiP Circulating Pumps Polyline 42

Fan B_HVAC_EF Exhaust fan Polyline 43 Duct B_HVAC_ED Exhaust Duct Polyline 44 Duct B_HVAC_ExD Existing Duct Polyline 44 Air Condition B_HVAC_Fs Air Conditioning

Fittings

Polyline 45 Duct B_HVAC_FID flexible Duct Polyline 44 Diffuser B_HVAC_RD Return Diffuser Polyline 46 Diffuser B_HVAC_SD Supply Diffuser Polyline 46 Diffuser B_HVAC_ED Extract Diffuser Polyline 46 Diffuser B_HVAC_Dm Dummy Diffuser Polyline 46 Grille B_HVAC_RG Return Grille Polyline 46

(42)

Feature

Name Layer Name Description Feature Type ReferenceAttribute Grille B_HVAC_SG Supply Grille Polyline 46 Air Condition B_HVAC_WAC Window Air

Conditioning

Polyline 47 Air condition B_HVAC_SAC Split Air

Conditioning

Polyline 48 Fan B_HVAC_FCU Fan coil unit Polyline 49

Heater B_MeP_WH Electric Water

Heater Polyline 50 Tank B_MeP_EWT Elevated water

tank

Polyline 51 Tank B_MeP_eEWT Existing Elevated

water tank

Polyline 51 Tank B_MeP_eGWT Existing ground

water tank

Polyline 51 Tank B_MeP_eRWT Exixting Roof

water tank

Polyline 51 Tank B_MeP_GWT Ground water tank Polyline 51

Sprinkler B_MeP_SN Sprinklers Nozzle Polyline 52 Sprinkler B_MeP_SMPL Sprinkler main

pipe line

Polyline 53 Chamber B_MeP_VC Valve chamber Polyline Ref

Drainage Attributes 1; Existing, Proposed, Future Buildings

Field Name Description Field

Type Field width Reference Table Owner Type of building C 50 1 Name Name of the Building C 50

Type_Code Sub Type of Building C 10 1.1 Area Area in Metre x Metre N 10

Length Length in Metre N 10 Width Width in Metre N 10 Height Height of the building N 10 No_Of_Floors No of floors of the

building

N 5 Proj_No Project number N 5 Table 1

Value Description

(43)

G Governmental Table 1.1

Type Type Code Description

Schools SCEB Elementary Boys School SCEG Elementary Girls School SCPB Primary Boys School SCPG Primary Girls School SCSB Secondary Boys School SCSG Secondary Girls School SCDG Deaf Girls School SCNM New Model School

SCHS Handicapped School

SCPB Preparatory Boys School SCPG Preparatory Girls School

SCIS Industrial School

SCMS Model Schools

SCNS Nursing School

SCKG Kindergarten

SCGT Gifted and Talented

School

Mosques MODF Daily Friday

MODA Daily

MOIH Imam House

MOEP Eid Praying Area MOMP Men’s Praying Area MOLP Ladies Praying Area Medical Services MEPH Primary Health Centres

MEDC Dental Clinics

MEVC Veterinary Clinic

MEHO Hospital

MEDM Dermatology Clinic

MEEM Emergency Medical

Services

MECH Children Hospital

MEPY Psychiatric hospital MEOP Out Patient clinic

Central market CMFS Fisheries

CMPM Poultry and Mutton

CMVG Vegetable

CMSH Slaughter House

CMLS Live Stock

(44)

Type Type Code Description

Ports & Harbours PHCT Container Terminal

PHIY Inspection yard

PHST Staff Accommodation

PHFH Fishing Harbour

PHYH Yatch Hanger

PHSD Sheds

PHCH Cargo Handling

Museums MUWM Weapons Museum

MUQI Qatar Islamic Arts

Museum

MUCT Traditional Costumes & Textiles Museum

MUQN Qatar National Museum Parks & Playgrounds PPLF Ladies and Family

PPGP General Public

PPPG Playgrounds

Laboratories LASD Seeds

LAFC Food Control

LAMT Material

LAPT Plant Tissue Culture

LAGE Genetic Engineering

LADL Drainage Laboratory

LACM Chemical Materials

LAAW Agriculture & Water Research

LARC Rodent Control

LAMC Measurement &

(45)

Attribute 2 : Elevations

Field Name Description Field Type Field width Reference Table Type Type of elevation C 50 2.1 Height Height of elevation N 10 Dimension Dimensions N 10

Material Material used C 50 Material table Proj_No Project

number

N 50

Table 2.1

Value Description

Elev 1 Nearest Elevation Elev 2 Second Elevation Elev 3 Third Elevation Elev 4 Fourth Elevation Elev 5 Fifth Elevation Attribute 3 : Roofing

Field Name Description Field Type Field width Reference Table Type Type of roofing C 50 3.1 Height Height of roofing N 10 Dimension Dimensions N 10

Material Material used C 50 Material Table Proj_No Project

number N 15

Table 3.1

Value Description

Roof 1 Highest Level for Roofing Roof 2 Second Level For Roofing Roof 3 Third Level For Roofing Roof 4 Fourth Level For Roofing

(46)

Attributes 4; Sections

Field Name Description Field Type Field width Reference Table Type Type of Section C 50 4.1 Dimension Dimensions N 10 Num_Sec Number of sections N 10

Material Material Used C 50 Material Table Proj_No Project

number

N 50

Table 4.1

Value Description

SN Nearest Elevation in Sections SF Far Elevation in Sections

VS Vertical Section

FS Footing Section

SS Sill section

Attributes 5: Accessories

Field Name Description Field Type Field width Value

Type Type of

accessories

Polyline 50

Material Material used Polyline 50 See Material table Quantity Number of accessories Polyline 15 Proj_No Project number N 50

(47)

Attributes 6; Doors

Field Name Description Field Type Field width value Type Type of door C 30

Material Material used C 30 See Material table

Thickness Thickness of the door

N 10 Height Height of the

door

N 10 Quantity Total number

of doors

N 10 Location Location of

doors

C 30 Open_ Dim Opening

dimension N 10 Frame_Dim Frame dimension N 10 Proj_No Project number N 50

Attributes 7: Sanitary fittings

Field Name Description Field Type Field width value Manftr Manufacturer C 50

Sealing Sealing used C 25 Con_to Connected to C 15 Proj_No Project

number N 50

Attributes 8; Light Fittings

Field Name Description Field Type Field width value

Type Type of

lighting

C 50 Position Position of the

lighting C 20

Power Power in voltage

N 10 Name Name of the

lighting C 20

Location Location fitted C 15 Proj_No Project

number

(48)

Attributes 9: Furniture

Type Type of

furniture

C 50 Location Location C 25

Name Name of the furniture N 15 Proj_No Project number N 50 Attributes 10: Parking

Field Name Description Field Type Field width value Area Parking Area

m/s N 10 Capacity Capacity of vehicles N 10 Location Location C 15 Proj_No Project number N 50 Attributes 11: Windows

Type Type of

window

C 10 Material Material N 10 See Material

table Size Size of the

window

C 25 Quantity Total number

of windows N 10

Location Location of the window

C 50 Opening_ Dim Opening

dimension N 10

Frame_ Dim Frame dimension

N 10 Proj_No Project

(49)

Attributes 12: Walls

Field Name Description Field Type Field width value Type Type of wall C 50

Material Material C 10 See Material table Height Height N 10 Thickness Thickness N 25 Proj_No Project number N 50

Attributes 13: Column, Beams, Footings, Blinding, Rafter, purling

Field Name Description Field Type Field width Reference Table

Type Type C 50 13.1

Material Material C 10 See Material table

Height Height of the

column N 10

Subtype Sub type of columns

C 5 Code Code used to

identify N 10

Proj_No Project number

N 50

Table 13.1

Type Sub Type Code

Columns Planted Column Pc

Columns Stub Column Sc

Columns Steel Column Stc

Columns Reinforced Column Rc

Beams Concrete Beam Cb

Beams Steel Beam Sb

Purling Pu

Rafter Raf

Blinding Bl

(50)

Attributes 14: Steps, ramps

Type Type C 10

Height Height of each

step N 10

No Steps Number of steps

N 25 Material Material C 50 See Material

table Width Width N 10 Proj_No Project number N 50 Attributes 15: Tiles

Type Type C 10

Dim Dimension N 10

N 50

Attributes 16: Circle

Type Type C 50

Material Material C 10 See Material table Dia Dimension in diameter N 10 Proj_No Project number N 50

(51)

Attributes 18: Angles

Type Type C 50

Material Material C 10 See Material table Angle Angle N 10 Length Length N 10 Proj_No Project number N 25 Attributes 20: Bolts

Field Name Description Field Type Field width Reference Table Type Type of bolts C 10

length Length N 10

Total_No Total number

of bolts N 10

N 25

Attributes 21: Levels

Field Name Description Field Type Field width Reference Table Height Height of each

floor

N 10 Tot_Floor Total number

of floors N 10 Floor_sec Number of sections per floor N 10 Proj_No Project number N 25

(52)

Attributes 22: Block Work

Field Name Description Field Type Field width Reference Table Type Type C 10 Brand Brand C 10 Position location C 10 Proj_No Project number N 25

Attributes 23: Light Fittings & Fan Switches

Field Name Description Field Type Field width Reference Table Type Type C 10 Brand Brand or manufacturer C 10 Position Position or location C 10 Proj_No Project number N 25 Attributes 24: Power

Field Name Description Field Type Field width Reference Table Power Voltage C Brand Name C 10 Position Location or position C 10 Proj_No Project number N 25

(53)

Attributes 25; Main Switch or Distribution Board

Type Type C 10

Capacity Capacity in

volts N 10

Brand Brand C 10

Length Point to Point N 10

N 25

Attributes 26: Electrical Distribution Board

Field Name Description Field Type Field width Reference Table Type Type C 50 Capacity Capacity in volts N 50 Brand Brand C 50

Material Material C See Material

table

Location Location C 50

N 25

Attributes 27: Cable Ducts

Field Name Description Field Type Field width Reference Table Type Type C 50 Capacity Capacity N 50 Brand Brand C 50 Location Location C 50 No_ETS Number N 10 Proj_No Project number N 25

(54)

Attributes 28: Fire heat and smoke detectors

Field Name Description Field Type Field width Reference Table Type Type C 25 Capacity Capacity C 25 Manufacturer Manufacturer C 25 Temp Temperature N 10 Location location C 50 Smoke_Det Smoke detector C 25 Heat_Det Heat detector C 25

No_Det Number of detectors

N 10 Proj_No Project

number N 25

Attributes 29; Fire Extinguishers

Location Location C 50

Type Type C 25

Name Name Character 25 Proj_No Project

number N 25

Attributes 30 : Alarm Bell Call Point

Field Name Description Field Type Field width Reference Table location Location C 50 Name Name N 15 Proj_No Project number N 25

(55)

Attributes 31: Fire Alarm main panel

Field Name Description Field Type Field width Reference Table Type Type C 50 Dim Dimension N 15 Area Location C 50 Proj_No Project number N 25

Attributes 32: Fire Sprinkler

Field Name Description Field Type Field width Reference Table Type Type C 50 Temp_rate Temperature rate N 15 Proj_No Project number N 25

Attributes 33: Emergency lighting

Type Type C 50

Area Location N 15

Proj_No Project

(56)

Attribute 39: Air Handling Unit

Field Name Description Field Type Field width Reference Table AHU_Ref Air handling

unit reference number

N 10

Type C 50

Area Area Served N 15

Supply_Air Supply Air

CFM9each0 N 50

Fresh_Air Fresh Air CFM(each)

N 50 Air_on_coil Air on coil N 15

Air_off_coil Air off Coil N 15 Coolin_Cap Cooling coil

capacity TR

N 15 Water_Flow Water Flow in

sgpm

N 15 External External St.

Pr in (Wg)

N 15 Ent_Temp Entering water

temperature

N 15 Leav_Temp Leaving water

Temperature

N 15 Fan_Volt Fan motor

voltage supply N 15 Location Location installed C 50 Proj_No Project number N 15

(57)

Attribute 40: Chiller Unit

Field Name Description Field Type Field width Reference Table Manufacturer Manufacturer

and model N 10 Type Type of air

chillier C 50 Num_unit Number of units N 10 On_Coil On Coil condition N 15 Off_Coil Off Coil

condition

N 50 Capacity Capacity in

TR

N 50 Cooler_Flow Cooler Flow

USGM

N 15 Chill_In Chilled water

in temperature

N 15 Chill_out Chilled water

out

temperature

N 15

Scale_Fact Scale factor N 15 Press_Drop Permissible pressure drop across cooler (in ft) N 15 Air_Cond Air on Condenser N 15 Number Number of Compressors N 15 Drive_Type Type of drive C 25

Motor_Type Type of Motor C 25 Location Location installed C 25 Motor_Comp F L A of each compressor motor C 25 Proj_No Project number N 15

(58)

Attribute 41; Chilled Pipe

Type Type C 50 Ref Table

10.1

Name Name C 50

Length Length of the pipe C 50 Capacity Capacity of the pipe N 50 Dimension Dimension C 50 Proj_No Project number N 50

Attribute 42: Chilled water pumps, Circulating Pump Field Name Description Field

Type Field width Reference Table Type Type of Water

Pump

C 50 Manufacturer Manufacturer and

model N 10

Capacity Capacity of the water pump USGPM

N

Head Pump working

head N 15

Flow_Rate Flow rate N 25 In_Pres Pump inlet

pressure

N 10 Out_Pre Pump Outlet

pressure

N 10 Motor_Pow Motor power N 25 Location Location installed C 25 Num_Pump Number of Pumps N 25 Proj_No Project number N 15

(59)

Attribute 43: Exhaust Fan

Field Name Description Field Type

Field width Reference Table Manufacturer Manufacturer and

model N 10

Type Type of Exhaust fan C 50

Area Area served N 15

Mot_Man Motor manufacturer N 15 Tot_Out Total Number of

Outlets CFM N 15

Tot_Stat Total Static pressure external

N 15 In_Pres Inlet Pressure N 15 Dis_Pres Discharge pressure N 15

Fan_Rpm Fan rpm N 15

Amp Amperes N 15

Volt Voltage N 15

Motor Motor Rpm N 15

Cap Capacitor N 15

Mot_Grov Motor sheaves & No

of Grooves N 15

Fan_Grov Fan sheaves & No of Grooves

N 15 Num_Tot Total Number of

exhaust fans N 25 Proj_No Project number N 15

(60)

Attribute 44: Exhaust Duct, Existing duct, Flexible duct Field Name Description Field

Type

model N 25

Type Type of Water Pump

C 50 Des_Vol Design volume

m3/s

N 10 Size Duct Size mm N 10

Area Duct Area mxm N 10

Velocity Velocity m/s N 10 Pressure Static pressure N 10

Location Number of units N 10 Cor_Fact Correction Factor N 10 Num_units Total Number of

exhaust fans

N 25 Proj_No Project number N 15

Attribute 45: Air Conditioning Fittings

model

N 10 Type Type of Exhaust fan C 50

Area Area served N 15

Num_Tot Total Number of

exhaust fans N 25 Proj_No Project number N 15

(61)

Attribute 46 : Return diffuser, Dummy diffuser, Supply Diffuser, Return grille, Supply Grille, Extract diffuser

model

N 25 Type Type of Water Pump C 50

Design Design N 10 46 1

Measured Measured 46.1.1

Location Number of units N 10 Cor_Fact Correction Factor N 10 Num_Ter Terminal Number N 25

Proj_No Project number N 15 Table GD 1

Value Description

Free_Area Free Area in meter square Volume Volume in meter cube / s Table GD1.1

Value Description

Velocity Velocity in meter square Volume Volume in meter cube / s Attribute 47: Window air conditioning

Field Name Description Field Type Field width Reference Table Manufacturer Manufacturer

and model

N 10

Type Duty of the Air Conditioner

N 50

Area Area served C 15

Num_Tot Total Number of Window Air conditioner N 25 Proj_No Project number N 15

(62)

Attribute 48: Split air conditioning

model N 10

Type Duty of the Air Conditioner

N 50

Capacity Nominal capacity N 10 Power Electrical supply

power

Split Air conditioner

N 10 Proj_No Project number N 15 Attribute 49: Fan coil Unit

Field Name Description Field Type Field width Reference Table Manufacturer Manufacturer and

model

N 10

Type Duty of the Air

Conditioner N 50

Air_Cap Air Quantity CFM N 10 Air_Coil Air on Coil DB /

WB N 10

Cool_Coil Cooling coil capacity TR (BTU/HR)

N 10

Water_flow Water Flow N 10 Pressure External static

Pressure

Split Air conditioner

N 10

AutoCAD Drawing Standards

AUTOCAD LAYERING ٍٍSTANDARDS

Version 1.0

Acknowledgement

Special thanks to

AutoCAD layering ٍٍSTANDARDS: Control and Authorization

AutoCAD layering ٍٍSTANDARDS: Distribution

AutoCAD Layering ٍٍSTANDARDS: Authorization and Change

Coordinators from the respective departments

Table of Contents