• No results found

Effects of early hemodynamic resuscitation on left ventricular performance and microcirculatory function during endotoxic shock

N/A
N/A
Protected

Academic year: 2020

Share "Effects of early hemodynamic resuscitation on left ventricular performance and microcirculatory function during endotoxic shock"

Copied!
14
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1 LV function parameters. LPS group (white bars), ERP group (gray bars), and Sham group (blackbars)
Table 1 Systemic hemodynamics and metabolic data
Table 2 Sublingual microcirculatory parameters
Figure 2 Correlation between MAP and MFI. The calculated inflection point of the biphasic relationshipfor MAP was 71 ± 6 mm Hg (R2 = 0.63).

References

Related documents

The ICNIRP assessment is grossly biased by selectively choosing studies, consistently misrepresenting the results, the significance of results, the implications of the results of

It is possible to have a parallel manipulator having more than one mobile platform, then these mobile platforms are connected to each other by means of serial kinematic chains

This implies that the effect of the predictor variable (loan financing) explains 73.9% of the variations in real estate sector performance in Kisumu City.. Licensed

HRMEC monolayers pretreated with netrin-1 (3 nM) and exposed to VEGF (2 nM) showed significantly less barrier function compro- mise than did those pretreated with the VI-V

When activated by a deficit in nutrient status, AMPK stimulates glucose uptake and lipid oxidation to produce energy, while turning off energy-consuming processes including

The solar emergency lamp described here has 51 white LEDs.It is powered either by solar power or AC mains or 12V SMF battery, under normal operation the lamp is powered by

Speaker Verification for various speakers has been done and the output for feature extraction like pitch extraction, formant extraction and generation of code

Several materials that are used under abrasive wear condition mainly require different desired property like flexibility, resistance to corrosion and good process ability [3,