CONTROL DESK SOLUTIONS

(1)

157

CONTROL DESK

SOLUTIONS

CONTROL DESKS SOLUTIONS

Three types of solutions:

- enclosures with control desk based on Areta system, with door, panel or front shelf

- modular desks with 400 and 500 mm depth - monobloc desks.

(2)

158 ARETA AL DESK CABINETS

ARETA AL

DESK CABINETS

ARETA AL

The control desk series AL is based on the same vertical modularity concept successfully tested with the PC enclosure:

the basic enclosure with Areta structure is completed

with a front frame that can be fitted with a closing panel or a shelf. Available in 4 widths, 2 depths and one height within 1400mm, the range of control desks can be completed with Areta accessories, to enrich a unique product in its category.

CHARACTERISTICS/DELIVERY

- ARETA structure with rear door or panel (assembled or in kit) - ATAL front frame complete with upper and lower door

(see specifications on page 160)

The front structure must be completed with shelf ATME…AL or front panel ATPN…AL.

PAINT FINISH

ETA standard epoxy polyester powder coating. - structure: colour RAL 7035 smooth finish - roof and bottom: colour RAL 7025 textured finish

- AL front, rear door or panel: colour RAL 7035 textured finish.

PROTECTION RATINGS

IP 55. ATPA front inserted mounting plate

(see page 162)

MAIN ACCESSORIES

ATFI side panels (see page 44)

ATZE modular plinth (see page 163)

(3)

(4)

160 ARETA AL DESK CABINETS

ASSEMBLED ARETA AL CABINET DELIVERY

- Areta structure already assembled with rear door or rear panel - ATAL structure (to be ordered separately the shelf or the front panel

and the mounting plate – check on page 161-162)

AL CABINET H=1400 WITH REAR DOOR

ATAL CODE CABINET DIMENSIONS 600 800 WIDTH DEPTH ATAL061404FP ATAL081404FP 400 400 1200 ATAL121404FP 400 1600 ATAL161404FP 400 600 ATAL061405FP 500 800 ATAL081405FP 500 1200 ATAL121405FP 500 1600 ATAL161405FP 500

AL CABINET H=1400 WITH REAR PANEL

ATAL CODE CABINET DIMENSIONS 600 800 WIDTH DEPTH ATAL061404FR ATAL081404FR 400 400 1200 ATAL121404FR 400 1600 ATAL161404FR 400 600 ATAL061405FR 500 800 ATAL081405FR 500 1200 ATAL121405FR 500 1600 ATAL161405FR 500

FLAT-PACK ARETA AL CABINET DELIVERY

- Areta structure supplied flat-pack with rear door or rear panel - ATAL structure (to be ordered separately the shelf

or the front panel and the mounting plate – check on page 161-162)

ATAL FRONT FRAME

CHARACTERISTICS/DELIVERY

Frame manufactured from 20/10 sheet steel. Roof extension manufactured from 20/10 sheet steel. Upper door manufactured from 15/10 sheet with sendzimir profiles and mechanical stop avoiding accidental closing, and Ø 3mm double bar locking system. Lower door manufactured from 15/10 sheet steel

with stiffening profile and Ø 3mm double bar latch closing system. - adhesive gasket and mounting accessories

- a pair of structural uprights.

(*) AL front structure, rear door, rear panel are supplied together with a pair of uprights.

FLAT-PACK ARETA AL CABINET

DIMENSIONS TOP + BOTTOM CODE 1400 400 1400 ATTF060040 ATTF060050 600 600 500 AL FRONT STRUCTURE* + STRUCT. UPRIGHT ATAL060140 ATPO060140 ATPO060140 ATAL060140 REAR DOOR* + STRUCT. UPRIGHT REAR PANEL* + STRUCT. UPRIGHT ATRE060140 ATRE060140 1400 ATTF080040

800 400 ATAL080140 ATPO080140 ATRE080140

1400 ATTF080050

800 500 ATAL080140 ATPO080140 ATRE080140

1400 ATTF120040

1200 400 ATAL120140 ATPO120140 ATRE120140

1400 ATTF120050

1200 500 ATAL120140 ATPO120140 ATRE120140

1400 ATTF160040

1600 400 ATAL160140 ATPO160140 ATRE160140

1400 ATTF160050

1600 500 ATAL160140 ATPO160140 ATRE160140

HEIGHT DEPTH WIDTH

(5)

161

ARETA AL

COMPLEMENTARY

ACCESSORIES

ARETA AL COMPLEMENTARY ACCESSORIES SHELF ATME CHARACTERISTICS

Structure manufactured from 15/10 sheet steel. Upper panel manufactured from 15/10 sheet steel

with sendzimir rails and gas springs avoiding accidental closing.

PAINT FINISH

ETA standard epoxy polyester powder coating. Colour: RAL 7035 textured finish.

DELIVERY

Supply includes: - one shelf

- upper panel complete with Ø 3mm double bar locking system - sealing gasket - mounting accessories.

SHELF

ATME CODE CABINET WIDTH 600 800 ATME000600AL ATME000800AL 1200 ATME001200AL 1600 ATME001600AL PANEL ATPN CHARACTERISTICS

Manufactured from 15/10 sheet steel.

PAINT FINISH

Colour: RAL 7035 textured finish.

DELIVERY

Supply includes nr. 1 piece with mounting accessories.

PANEL

ATPN CODE CABINET WIDTH 600 800 ATPN000600AL ATPN000800AL 1200 ATPN001200AL 1600 ATPN001600AL

(6)

For L > 1400

Mounting plate manufactured with two parts with horizontal union and stiffening omega.

For the correct use and handling of the mounting plates, it is suggested to wear proper gloves

(complying with the art. 41-42-43 of the decree 626/94).

For the correct use and handling of the mounting plates, it is suggested to wear proper gloves

(complying with the art. 41-42-43 of the decree 626/94).

To be ordered separately:

- mounting accessories (see page 36). To be ordered separately:

- mounting accessories WTSF - 001CP. To be ordered separately:

- lateral rails (see below) and mounting accessories (see page 54).

162 ARETA AL

COMPLEMENTARY ACCESSORIES

MOUNTING PLATE H=800 ATPR

Manufactured from 25/10 sendzimir sheet steel.

MOUNTING PLATE H=800

ATPR CODE CABINET WIDTH 600 800 ATPR-060080 ATPR-080080 1200 ATPR-120080 1600 ATPR-160080 RAILS WTPR

Supply includes: nr. 2 pieces.

RAILS

WTPR CODE CABINET DEPTH 400 500 WTPR-050040CP WTPR-050050CP 600 WTPR-050060CP 800 WTPR-050080CP

MOUNTING PLATE H=1300 ATPA

MOUNTING PLATE H=1300

ATPA CODE CABINET WIDTH 600 800 ATPA-060140 ATPA-080140 1200 ATPA-120140 1600 ATPA-160140

(7)

163 ARETA AL

MODULAR PLINTH ATZE CHARACTERISTICS

Corner pieces manufactured from 25/10 sheet steel, with PVC front covers caps.

Front and side crosspieces manufactured from 20/10 press bent sheet steel.

PAINT FINISH

ETA standard epoxy polyester powder coating. Colour: RAL 7025 textured finish

DELIVERY

The modular plinth is made up of:

- corner pieces: supply includes 4 pieces complete with front covers and mounting hardware

- front crosspieces: supply includes 2 pieces - side crosspieces: supply includes 2 pieces.

Supply includes 2 pieces.

To order the front crosspieces H=200, add the suffix “D” to the code. I.E.: ATZE-T0600D. Supply includes 4 pieces with mounting accessories.

UNIVERSAL FRONT CROSSPIECES

ATZE CODE

DESCRIPTION CROSS. LENGTH (mm) FRONT CROSS. FOR PLINTH W=600 444 FRONT CROSS. FOR PLINTH W=800

ATZE-T0600

ATZE-T0800 644

FRONT CROSS. FOR PLINTH W=1200

ATZE-T1200 1044

ATZE-T1600 1444

To order the side crosspieces H=200,

add the suffix “D” to the code. I.E.: ATZE-T0400TD.

SIDE CROSSPIECES FOR DESK CABINET

ATZE CODE

DESCRIPTION CROSS. LENGTH (mm) SIDE CROSS. FOR PLINTH D=400 369

469 SIDE CROSS. FOR PLINTH D=500

ATZE-T0400T ATZE-T0500T

Note: for more information, assembly drawings and dimensional features, please check on page 217.

UNIVERSAL CORNER PIECES

ATZE CODE

DESCRIPTION

CORNER PIECES FOR PLINTH H=100 ATZE-A100

(8)

164 MODULAR CONTROL DESKS

MODULAR CONTROL DESKS

BOX AE

CHARACTERISTICS

Structure manufactured from 15/10 press bent sheet steel. Mounting plate manufactured from 25/10 sendzimir sheet steel. Door manufactured from 15/10 sheet steel with lateral stiffening cover.

DELIVERY

- box

- door complete with Ø 3mm double bar closing system - mounting plate

- adjustable cable entry.

PAINT FINISH

ETA standard epoxy polyester powder coating.

Enclosure, door and panel: colour RAL 7035 textured finish.

CONFORMITY AND APPROVAL

- IP 55

- NEMA 12 complying with UL508A; UL50.

BOX AE

600 AE601 800 B A 770 770 400 400 P C 489 689 303 303 D E 490 690 260 530 260 730 F L H I (MAX) 358 358 M 445 684 645 684 AE802 1200 770 400 1089 303 510 (x2) 260 445 1130 684 358 AE123 1600 770 400 1489 303 710 (x2) 260 645 1530 684 358 AE164 AE CODE

DIMENSIONS FIXING FLOOR CABLE ENTRY DOOR SPACE INNER PLATE

400MM DEPTH W=600/800 W=1200/1600 available space available space available space

(9)

UPPER PART PE CHARACTERISTICS

Structure manufactured from 15/10 press bent sheet steel. Mounting plate manufactured from 25/10 sendzimir sheet steel with zincpassivated 20/10 rails for mounting plate adjustment. Overturning front panel manufactured from 20/10 sheet steel complete with sendzimir vertical rails and mechanical stop.

DELIVERY

- upper part

- overturning front cover with Ø 3mm double bar closing system - mounting plate

- sealing gasket - mounting accessories.

PAINT FINISH

- IP 55.

SHELF LE

CHARACTERISTICS

Structure manufactured from 15/10 press bent sheet steel. Upper panel manufactured from 20/10 sheet steel with sendzimir rails and gas springs to support lid and avoiding accidental closing.

DELIVERY

- shelf

- lid complete with Ø 3mm double bar closing system - rails to mount supplementary mounting plate - sealing gasket

- mounting accessories.

PAINT FINISH

PROTECTION RATINGS - IP 55.

SHELF LE

LE CODE B NR. OF LOCKS 600 2 2 800 LE601 LE802 2 1200 LE123 3 1600 LE164

UPPER PART PE

PE CODE

B MOUNTING PLATE DIM.

600 510 250 L H I (MAX) 710 250 800 PE601 PE802 1110 250 1200 PE123 1510 250 1600 370 370 370 370 PE164 innner plate available

(10)

Typical composition: AE box + LE shelf + PE upper part

SHELF ME

CHARACTERISTICS

Structure manufactured from 15/10 press bent sheet steel. Upper panel manufactured from 20/10 sheet steel with sendzimir rails and gas springs to support lid and avoiding accidental closing.

DELIVERY

- shelf

- lid complete with Ø 3mm double bar closing system - sealing gasket

PAINT FINISH

- IP 55

- NEMA 12 complying with UL508A, UL50

SHELF ME

ME CODE B NR. OF LOCKS 600 2 2 800 ME601 ME802 2 1200 ME123 3 1600 ME164 available

(11)

BOX AE

CHARACTERISTICS

Structure manufactured from 15/10 press bent sheet steel. Mounting plate manufactured from 25/10 sendzimir sheet steel. Front and rear doors manufactured from 15/10 sheet steel with lateral stiffening cover.

DELIVERY

- box

- doors complete with Ø 3mm double bar closing system - mounting plate

- adjustable cable entry.

PAINT FINISH

ETA standard epoxy polyester powder coating. Box and doors: colour RAL 7035 textured finish.

- IP 55

- NEMA 12 complying with UL508A; UL50.

BOX AE

800 AE8025 1200 B A 770 770 500 500 P C 689 1089 373 373 D E 690 510 (X2) 330 730 330 1130 F L H I (MAX) 425 425 M 645 684 445 684 AE1235 1600 770 500 1489 373 710 (X2) 330 645 1530 684 425 AE1645 AE CODE

DIMENSIONS FLOOR FIXING CABLE ENTRY DOOR SPACE INNER PLATE

500MM DEPTH W=800 W=1200/1600 available space available space available space

(12)

SHELF LE

CHARACTERISTICS

DELIVERY

- shelf

- lid complete with Ø 3mm double bar closing system - rails to mount supplementary mounting plate - sealing gasket

PAINT FINISH

SHELF LE

LE CODE B NR. CLOSING SYSTEM 800 2 2 1200 LE8025 LE1235 3 1600 LE1645 UPPER PART PE CHARACTERISTICS

Structure manufactured from 15/10 press bent sheet steel. Mounting plate manufactured from 25/10 sendzimir sheet steel with 20/10 zincpassivated rails for mounting plate adjustment. Overturning front and rear panel manufactured from 20/10 sheet steel complete with sendzimir vertical rails and mechanical stop.

DELIVERY

- upper part

- overturning front cover with Ø 3mm double bar closing system - mounting plate

- sealing gasket - mounting accessories.

PAINT FINISH

UPPER PART PE

PE CODE B PLATE DIMENSIONS 800 710 335 L H I (MAX) 1110 335 1200 PE8025 PE1235 1510 335 1600 PE1645 370 370 370 available

front panel rear panel

(13)

Typical composition: AE box + LE shelf + PE upper part

SHELF ME

CHARACTERISTICS

DELIVERY

- shelf

- lid complete with Ø 3mm double bar closing system - sealing gasket

PAINT FINISH

- IP 55

- NEMA 12 complying with UL508A, UL50.

SHELF ME

ME CODE B NR. OF LOCKS 800 2 2 1200 ME8025 ME1235 3 1600 ME1645 available

(14)

PAINT FINISH

DELIVERY

- front crosspieces: supply includes 2 pieces - side crosspieces: supply includes 2 pieces

UNIVERSAL CORNER PIECES

ATZE CODE

DESCRIPTION

UNIVERSAL FRONT CR0SSPIECES

ATZE CODE

DESCRIPTION CROSS. LENGTH (mm) FRONT. CROSS. FOR PLINTH W=600 444 FRONT. CROSS. FOR PLINTH W=800

ATZE-T0600

ATZE-T0800 644

FRONT. CROSS. FOR PLINTH W=1200

ATZE-T1200 1044

FRONT. CROSS. FOR PLINTH W=1600

ATZE-T1600 1444

add the suffix “D” to the code. I.E.: ATZE-T0400AD.

SIDE CROSSP. FOR MODULAR CONTROL DESKS

ATZE CODE

DESCRIPTION CROSS. LENGTH (mm) SIDE CROSS. PLINTH D=400 236

306 SIDE CROSS. PLINTH D=500

ATZE-T0400A ATZE-T0500B

(15)

171

MONOBLOC

CONTROL DESKS

MONOBLOC CONTROL DESKS

SBA

CHARACTERISTICS

Structure manufactured from 15/10 press bent sheet steel. Mounting plate manufactured from 25/10 sendzimir sheet steel. Front and rear doors manufactured from 15/10 sheet steel with lateral stiffening cover.

Upper panel manufactured from 15/10 sheet steel complete with sendzimir rails and gas springs to support lid

and avoiding accidental closing.

PAINT FINISH

Structure, doors, upper panel: colour RAL 7035 textured finish.

DELIVERY

- control desk

- upper panel complete with closing system - adjustable cable entry.

- IP 55

W=600/800 W=1000/1200

available

internal mounting plate

(16)

172 MONOBLOC CONTROL DESKS

PAINT FINISH

DELIVERY

UNIVERSAL FRONT CROSSPIECES

ATZE CODE

ATZE-T0600

ATZE-T0800 644

ATZE-T1000 844

ATZE-T1200 1044

add the suffix “D” to the code. I.E.: ATZE-T0400BD.

SIDE CROSSPIECES FOR SBA CONTROL DESKS

ATZE CODE

DESCRIPTION CROSS. LENGTH (mm) SIDE CROSSPIECES FOR PLINTH D=400 206 ATZE-T0400B

UNIVERSAL CORNER PIECES

ATZE CODE

DESCRIPTION

CONTROL DESK SBA

600 SBA601 800 B A 1000 1000 400 400 P C 489 689 273 273 D E 490 690 230 230 F M 445 645 530 730 L I (MAX) 334 334 H 830 830 SBA801 1000 1000 400 889 273 410 (X2) 230 345 930 830 334 SBA001 1200 1000 400 1089 273 510 (X2) 230 445 1130 830 334 SBA201 SBA CODE

(17)

ZBA

CHARACTERISTICS

Structure manufactured from 15/10 press bent sheet steel. Mounting plate manufactured from 25/10 sendzimir sheet steel mounted on the rear cover.

Upper cover manufactured from 15/10 sheet steel complete with sendzimir profiles and mechanical stop.

Adjustable cable entry.

PAINT FINISH

Structure, doors, upper panel: colour RAL 7035 textured finish.

DELIVERY

- control desk

- upper cover complete with locking system - adjustable cable entry.

- IP 55

CONTROL DESK ZBA

FLOOR FIXING DIMENSIONS

ZBA CODE

DOOR SPACE

CABLE ENTRY INNER PLATE 400 400 600 ZBA601 ZBA801 800 D P B A C E F M L H 1000 1000 489 689 303 303 490 690 260 260 445 645 520 720 918 918 400 ZBA001 1000 1000 889 303 410 (X2) 260 345 920 918 400 ZBA201 1200 1000 1089 303 510 (X2) 260 445 1120 918 W=600/800 W=1000/1200 available inner plate available

(18)

PAINT FINISH

DELIVERY

UNIVERSAL CORNER PIECES

ATZE CODE

DESCRIPTION

UNIVERSAL FRONT CROSSPIECES

ATZE CODE

ATZE-T0600

ATZE-T0800 644

ATZE-T1000 844

ATZE-T1200 1044

add the suffix “D” to the code. I.E.: ATZE-T0400AD.

SIDE CROSSPIECES FOR ZBA CONTROL DESKS

ATZE CODE

DESCRIPTION CROSS. LENGTH (mm) SIDE CROSS. FOR PLINTH D=400 236 ATZE-T0400A

(19)

MOUNTING PLATE FOR LE

DELIVERY

Supply includes nr. 1 piece complete with mounting accessories.

MOUNTING PLATE FOR LE

PA4-LE CODE LE WIDTH 600 800 PA4-LE015 PA4-LE025 1200 PA4-LE235 1600 PA4-LE645 175

CONTROL DESKS

COMPLEMENTARY

ACCESSORIES

CONTROL DESKS COMPLEMENTARY ACCESSORIES CASING FOR PE

To be mounted on the 500mm deep PE instead of the rear panel when a greater depth is required.

CHARACTERISTICS

PAINT FINISH

DELIVERY

Supply includes nr. 1 casing with closing system, sealing gasket and mounting accessories.

CASING PE

PECF CODE PE WIDTH 800 1200 PECF8025 PECF1235 1600 PECF1645

MOUNTING PLATE FOR AE

DELIVERY

MOUNTING PLATE FOR AE

PA4-AE CODE AE WIDTH 800 1200 PA4-AE825 PA4-AE235 1600 PA4-AE645 equipment footprint

(20)

176 CONTROL DESKS

COVER TL FOR LE SHELF

PAINT FINISH

Colour: RAL 7035 textured finish.

DELIVERY

Supply includes nr. 1 piece complete with sealing gasket and mounting accessories.

TL FOR LE D=400

TL CODE DIMENSIONS 600 B P 800 TL601 TL802 1200 TL123 1600 398 398 398 398 TL164

HANDLE FOR CONTROL DESK

Manufactured from aluminium alloy.

HANDLE

WA CODE WIDTH 600 800 WA-400 WA-410 1000 WA-430 1200 WA-440 1600 WA-450

TL FOR LE D=500

TL CODE DIMENSIONS 800 B P 1200 TL8025 TL1235 1600 TL1645 498 498 498

SPA UPPER PART

SPA CODE DIMENSIONS 594 B E 794 SPA601 SPA801 994 SPA001 1194 470 670 870 1070 SPA201

(21)

177 CONTROL DESKS COMPLEMENTARY ACCESSORIES

LOCKING SYSTEMS

WE CODE REF. DESCRIPTION LOCK WE251 1

WE255 2 ETA INSERT

WE160 3 ETA KEY

WE260 4 INSERT 6 WE263 5 KEY 6 WE265 6 INSERT 7 WE268 7 KEY 7 WE270 8 INSERT 6,5 WE273 9 KEY 6,5 WE275 10 INSERT 8 WE278 11 KEY 8 WE209 12 FIAT LOCK WE210 13 FIAT KEY

LOCKING SYSTEMS

WE CODE REF. DESCRIPTION ROD SYSTEM WE010 1

WE080 2 FIAT INSERT

WE210 3 FIAT KEY

WE027 4 COVER FOR FIAT INSERT WE030 5 ETA INSERT Ø 3 WE160 6 ETA KEY Ø 3 WE040 7 ETA INSERT Ø 5 WE170 8 ETA KEY Ø 5 WE050 9 INSERT 7 WE180 10 KEY 7 WE060 11 INSERT 8 WE190 12 KEY 8 WE070 13 INSERT 7 WE200 14 KEY 7 WE020 15 ETA LOCK COVER