• No results found

Preparation of novel ink jet inks with uv absorbers, for digital printing of synthetic fibres

N/A
N/A
Protected

Academic year: 2020

Share "Preparation of novel ink jet inks with uv absorbers, for digital printing of synthetic fibres"

Copied!
6
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 1. Ink formulations prepared with and without active agent
Table 2. Wash and light fastness values of the printed samples with/without active agent
Table 3. Color coordinates L*, a*, b*, C*, H* and colour strength K/S values of the printings with/without active agent

References

Related documents

The remaining will be awarded to L1 (i.e. NLC manufacturer/ supplier not meeting prescribed LC criteria). In order to boost the domestic manufacturing, it is

A test on the supplementary road trial site in Denmark will result in a test report serving as documentation of the performances obtained in relation to the number of wheel

Try disabling instruments you're not using (click the instrument picture within the active patch), or disable mic positions. You might also use the 16-bit samples instead

You can configure individual fixture settings such as the MAC III Profile’s DMX address, read out data, execute service and view the event log using the fixture’s backlit

Порушення розумового розвитку дитини: причини та можливості попередження УДК 616.83008.5053.2085.207036.86 Порушення розумового розвитку, або

Penwell asked for clarification for what would be needed for Arbor to do the project versus the requests for the costs that the Town has discussed.. Arbor’s engineer continued

The significant changes were a decrease in body oxygen consumption and carbon dioxide excretion, a decrease in the mixed venous oxygen content, a significant widening of