• No results found

Automatic air conditioning system

N/A
N/A
Protected

Academic year: 2021

Share "Automatic air conditioning system"

Copied!
8
0
0

Loading.... (view fulltext now)

Full text

(1)

Airflow and outlets are automatically adjusted according to the tempera-ture setting.

With navigation system

Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”.

Without navigation system

Automatic mode

Driver’s side temperature setting display

Changes the air outlets used

Off

Fan speed Airflow display

Fan speed display

Passenger’s side temperature setting display Driver's side temperature control Air conditioning ON/OFF switch Outside air or recirculated air mode Windshield defogger

Passenger’s side temperature control

(2)

3

Interior fe

ature

s

Press “∧” to increase the temperature and “∨” to decrease the

temperature on the

switch.

The temperature for the driver and passenger seats can be set sepa-rately.

Adjusting the settings

Adjusting the temperature setting

Press “∧” to increase the temperature and “∨” to decrease the

temper-ature on the

switch.

Press

“∧” (increase) or “∨” (decrease) on the

switch to separately adjust the temperature for the passenger and driver sides (dual mode). Press to return the driver and passenger side temperatures to the same setting (simultaneous mode).

The air conditioning system switches between individual and simultaneous modes each time is pressed.

Adjusting the fan speed

Press “∧” (increase) or “∨” (decrease) on

.

Press to turn the fan off.

(3)

Changing the air outlets

Press “∧” or “∨” on the

switch.

The air outlets switch each time the switch is pressed.

Air flows to the upper body.

Air flows to the upper body and

feet.

Air flows to the feet.

(4)

3

Interior fe

ature

s

Defogging the windshield

Defogging

The air conditioning system oper-ates automatically.

Recirculated air mode will auto-matically switch to outside air mode. It is not possible to return to recirculated air mode when the switch is on.

Adjusting the sensitivity of the air intake control in automatic mode

Press

for 2 or more

sec-onds.

Press “∧” (increase) or “∨”

(decrease) on the

switch.

From —3 (low) to 3 (high) can be set.

STEP 1

(5)

Adjusting the position of and opening and closing the air outlets

Center outlets

Direct air flow to the left or right,

up or down

Front outlets (right and left side)

Direct air flow to the left or right,

up or down

Turn the knob right to open the

vent and left to close the vent

Rear outlets

Direct air flow to the left or right,

up or down

(6)

3

Interior fe

ature

s

■Using the automatic mode

Fan speed is adjusted automatically in accordance with the temperature setting and ambient conditions. As a result, the following may occur.

●Immediately after the switch is pressed, the fan may stop for a while until warm or cool air is ready to flow.

●Cool air may flow to the area around the upper body when the heater is on.

■Using the system in recirculated air mode

The windows will fog up more easily if the recirculated air mode is used for an extended period.

■Switching between outside air and recirculated air modes

Recirculated air mode or outside air mode may be automatically switched to in accordance with the temperature setting and the inside temperature.

■Window defogger feature

Recirculated air mode may automatically switch to (outside air) mode in sit-uations where the windows need to be defogged.

■Outside air temperature approaches 32°F (0°C).

The air conditioning system may not operate even when is pressed.

■When the indicator light on flashes

Press and turn off the air conditioning system before turning it on once more. There may be a problem in the air conditioning system if the indicator light continues to flash. Turn the air conditioning system off and have it inspected by your Lexus dealer.

■Automatic mode for air intake control

(7)

■Air conditioning odors

●During use, various odors from inside and outside the vehicle may enter into and accumulate in the air conditioning system. This may then cause odor to be emit-ted from the vents.

●To reduce potential odors from occurring:

• It is recommended that the air conditioning system be set to outside air mode prior to turning the vehicle off

• The start timing of the blower may be delayed for a short period of time imme-diately after the air conditioning system is started in automatic mode.

CAUTION

■To prevent the windshield from fogging up

Do not use during cool air operation in extremely humid weather. The dif-ference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, blocking your vision.

NOTICE

■To prevent battery discharge

(8)

3

Interior fe

ature

s

CAUTION

■When the outside rear view mirror defoggers are on

Do not touch the outside surface of the rear view mirror, as it can become very hot and burn you.

These features are used to defog the rear window, and to remove rain-drops, dew and frost from the outside rear view mirrors.

Without navigation system

ON/OFF

The defoggers will automatically turn off after 15 to 60 minutes. The operation time changes according to the ambient tem-perature and vehicle speed.

With navigation system

ON/OFF

References

Related documents

Your Bryant air conditioning system, backed by the world’s best name in comfort and supported with expert installation, maintenance and service by your local Bryant dealer

Pressure too low a t high pressure side Probable cause Refrigerant flow obstructed by moisture or dirt in refrigerant freezing or adhering to expansion valve orifice

AC AMBIENT TEMPERATURE SENSOR COMPRESSOR AND MAGNETIC CLUTCH CONDENSER - MG CLT RELAY - HEATER RELAY INTEGRATION CONTROL AND PANEL PRESSURE SWITCH.. ENGINE ROOM

Check the wiring harness between rear window defogger relay connector C-205 (terminal 3) and A/C-ECU connector C-15 (terminal 8). If junction block connector C-215 is damaged,

26: Identifying Room Temperature Sensor Resistance Graph Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.. Measure the resistance of

Windshield defogger button Air outlet selector button Outside/ recircu- lated air mode but- ton Passenger's side temperature control buttons “OFF” button Automatic mode button Fan

The mode switches between (recycles air inside the vehicle) and (introduces air from outside the vehicle) modes each time..

Water temperature sensor attached to the heater core inlet tube detects the coolant temperature in the heater core and sends the signal to the controller. The signal becomes data