Training: NDT Access Conditions

(1)

2016

Training: NDT – Access Conditions

Level 1 : MT, VT, PT Direct access to the course shall be granted if the candidate has passed both mathematics and science at Grade 10 (Proof of Grade 10 – or equivalent such as N1; certificate is required).

Level 1 : UT, RT, ECT

Please note that RT Safety is mandatory for access to an RT 1 course and no RT 1 certificate shall be issued unless a RT Safety certificate in accordance with DOH and issued by Nelson Mandela

Metropiltan University Certificate can be shown.

Direct access to the course shall be granted if the candidate has passed both mathematics and science at Grade 12 (Proof of Grade 12 – or equivalent such as N3 certificate is required).

Alternatively, the candidate shall be required to pass a Proficiency Exam for surface methods, prior to being eligible to sit the applicable NDT course.

Please note that the Proficiency test is free of charge and only assesses the basic skills relating to mathematics, science, comprehension and communication capabilities required within

the applicable NDT method. The pass mark for the Proficiency test is 70%. Please contact Harold Jansen ([email protected]) to ascertain availability and to make a booking.

Proficiency tests are performed on Thursdays between 8:00 and 11:00. In the case of candidates not being able to attend the Proficiency test due to transport problems, arrangements can

be made to have the test e-mailed to a suitable invigilator and returned via email once completed.

Level 2 - All Methods

Candidate shall be qualified i.e. have received training in accordance with ISO9712: 2012 requirements and have passed the Level 1 qualification examinations (certified is preferred) as a

Level 1 NDT Technician in the applicable method and sector.

Direct Access to Level 2:

Candidate shall have passed both mathematics and science at Grade 12 level (Equivalent to N3 - Proof of Grade 12 certificate is required) and have applicable tertiary qualification(s) and / or

relevant NDT experience. Combination of Level 1 and Level 2 Training hours in accordance with an approved syllabus and training programme as per SAQCC - NDT requirements and based on

Certification body approval. The Level 1 qualification examinations shall also have been successfully passed.

Level 3 - All Methods

Candidate shall be qualified i.e. received training in accordance with ISO9712: 2012 requirements and have passed the Level 2 qualification examinations (certified is preferred) as a Level 2

NDT Technician in the applicable method and sector, appropriate tertiary qualifications (relevant to the NDT method - chemistry, mathematics or physics; and / or to the product or industry

sector - chemistry, metallurgy, engineering etc.) are advantageous.

All candidates for Level 3 Certification in any NDT method shall have successfully completed the Level 2 Practical exam. (If not certified as Level 2, the practical examination shall have been

passed within 1 year from date of writing the Level 3 main method examination)

Valid Level 2 Certificate in the applicable method and sector is mandatory when equipment operation or accepting tested components are required

Direct Access to Level 3:

Combination of Level 1, 2 and 3 Training hours in accordance with an approved syllabus and training program as per ISO 9712 : 2012 and SAQCC NDT requirements and based on Certification

body verification. The Level 2 qualification examinations shall also have been successfully passed. No reduction in requirements for industrial experience. Suitable tertiary qualifications

(relevant to the NDT method - chemistry, mathematics or physics; and / or to the product or industry sector - chemistry, metallurgy, engineering etc.) are mandatory.

Please contact the following for further information:

General: [email protected] – 011 298 2106 or SAIW Examination Administration: [email protected] – 011 298 2128 or SAIW Certification Administrator: [email protected] or 011 298 2108.

(2)

2016

Training: Non Destructive Testing (NDT)

Please contact the following for further information:

General: [email protected] – 011 298 2106 or SAIW Examination Administration: [email protected] – 011 298 2128 or SAIW Certification Administrator: [email protected] or 011 298 2108.

Please note that the training schedule is revised and updated monthly - please refer to the SAIW website for the latest version. Please Contact the NDT Training Manager - Mark Digby (Email: [email protected])

should you have sufficient student numbers to accommodate an additional course based on your company’s time schedule. (Subject to the availability of resources)

The following courses can currently be presented at a suitable venue supplied by the booking company viz. UTWT, RT Inter and Appreciation of NDT for Engineers.

2016 Industrial

Sector

Product

Sector /

Category

(Single sector available on

request)

Duration

(hrs.)

Prices (inclusive of VAT):

Course dates

TRAINING &

EXAMINATION (Non- Members)

TRAINING &

EXAMINATION (Corporate Members)

CERTIFICATION (Initial)

Magnetic Testing (MT)

SURFACE METHODS : ISO 9712

Magnetic Testing (MT):

Level 1 Gr 10 with Maths

& Science OR Proficiency Test > 70% - Mandatory

MT 1.A Pre - & In - Service Testing

MT 1.1 Forgings;

MT 1.2 Castings;

MT 1.3 Welds

Training 32 hours Examination

8 hours

R 12 130.00 R 11 160.00 R 2 170.00

Group 1: 11 - 14 Jan (DBN 1)

Exam: 15 Jan Group 2: 18 - 21 Jan

Exam: 22 Jan Group 3: 22 - 25 Feb

Exam: 26 Feb Group 4: 04 - 07 Apr (DBN 2)

Exam: 8 Apr Group 5: 09 - 12 May

Exam: 13 May

Group 6: 16 - 19 May

Exam: 29 May Group 7: 30 May - 02 Jun

Exam: 03 Jun Group 8: 04 - 07 Jul

Exam: 08 Jul Group 9: 25 - 28 Jul

Exam: 29 Jul Group 10: 22 - 25 Aug (DBN 3)

Exam: 26 Aug

Group 11: 29 Aug - 01 Sep

Exam: 02 Sep Group 12: 12 - 15 Sep

Exam: 16 Sep Group 13: 03 - 06 Oct (DBN 4)

Exam: 07 Oct Group 14: 07 - 10 Nov (DBN 5)

Exam: 11 Nov Group 16: 14 - 17 Nov

Exam: 18 Nov

Magnetic Testing (MT):

Level 2 MT 1 A training

& Qualification Examination

MT 2.1 Forgings;

MT 2.2 Castings;

MT 2.3 Welds

8 hours

R 12 130.00 R 11 160.00 R 2 170.00

Group 1: 25 - 28 Jan

Exam: 29 Jan Group 2: 07 - 10 Mar

Exam: 11 Mar Group 3: 11 - 14 Apr

Exam: 15 Apr Group 4: 23 - 26 May (DBN 1)

Exam: 27 May Group 5: 06 - 09 Jun

Exam: 10 Jun Group 6: 20 - 23 Jun

Exam: 24 Jun Group 7: 01 - 04 Aug (DBN 2)

Exam: 05 Aug Group 8: 15 - 18 Aug

Exam: 19 Aug Group 9: 05 - 08 Sep

Exam: 09 Sep Group 10: 10 - 13 Oct

Exam: 14 Oct Group 11: 24 - 27 Oct

Exam: 28 Oct Group 12: 28 Nov - 01 Dec (DBN 3)

Exam: 02 Dec Group 13: 05 - 08 Dec

Exam: 09 Dec

Magnetic Testing (MT) Level 3:

NDT Level 3 Basic + MT 2.A Training

16 hours

R 15 750.00 R 15 000.00 R 2 170.00

Group 1: 31 Oct - 04 Nov Exam: 06 Dec & 12 - 15 Dec

(3)

2016

Training: Non Destructive Testing (NDT)

2016 Industrial

Sector

Product

Sector /

Category

(Single sector available on request)

Duration

(hrs.)

Prices (inclusive of VAT):

Course dates

TRAINING &

Penetrant Testing (PT)

Penetrant Testing (PT):

Level 1 Gr 10 with Maths

& Science OR Proficiency Test > 70% - Mandatory

PT 1.A Pre - & In - Service Testing

PT 1.1 Forgings;

PT 1.2 Castings;

PT 1.3 Welds

8 hours

R 12 130.00 R 11 160.00 R 2 170.00

Group 1: 11 - 14 Jan

Exam: 15 Jan Group 2: 18 - 21 Jan (DBN 1)

Exam: 22 Jan Group 3: 29 Feb - 03 Mar

Exam: 04 Mar Group 4: 14 - 17 Mar

Exam: 18 Mar Group 5: 09 - 12 May

Exam: 13 May

Group 6: 16 - 19 May (DBN 2)

Exam: 20 May Group 7: 06 - 09 Jun

Exam: 10 Jun Group 8: 11 - 14 Jul

Exam: 15 Jul Group 9: 25 - 28 Jul (DBN 3)

Exam: 29 Jul Group 10: 22 - 25 Aug

Exam: 26 Aug

Group 11: 19 - 22 Sep

Exam: 21 Oct Group 13: 21 - 24 Nov (DBN 4)

Exam: 25 Nov Group 14: 28 Nov - 01 Dec

Exam: 02 Dec

Level 2 PT 2.A Training

PT 2.1 Forgings;

PT 2.2 Castings;

PT 2.3 Welds

8 hours

R 12 130.00 R 11 160.00 R 2 170.00

Group 1: 25 - 28 Jan (DBN 1)

Exam: 29 Jan Group 2: 01 - 04 Feb

Exam: 05 Feb Group 3: 04 - 07 Apr

Exam: 08 Apr Group 4: 11 - 14 Apr (DBN 2)

Exam: 15 Apr Group 5: 23 - 26 May

Exam: 27 May Group 6: 30 May - 02 Jun (DBN 3)

Exam: 03 Jun Group 7: 27 - 30 Jun

Exam: 01 Jul Group 8: 01 - 04 Aug

Exam: 05 Aug Group 9: 15 - 18 Aug

Exam: 19 Aug Group 10: 10 - 13 Oct (DBN 4)

Exam: 14 Oct Group 11: 07 - 10 Nov

Exam: 11 Nov Group 12: 14 - 17 Nov (DBN 5)

Exam: 18 Nov Group 13: 05 - 08 Dec

Exam: 09 Dec

Level 3 NDT Level 3 + PT 2.A Training & Qualification Examination

16 hours

R 15 750.00 R 15 000.00 R 2 170.00

Group 1: 24 - 28 Oct Exam: 05 Dec & 12 - 15 Dec

(4)

2016

Training: Non Destructive Testing (NDT)

2016 Industrial

Sector

Product Sector

/ Category

(Single sector available on request)

Duration

(hrs.)

Prices (inclusive of VAT):

Course dates

TRAINING &

Visual Testing (VT)

Visual Testing (VT): Level 1 Gr 10 with Maths & Science OR Proficiency Test > 70% - Mandatory

VT 1.A Pre - & In - Service Testing

VT 1.1 Forgings;

VT 1.2 Castings;

VT 1.3 Welds

8 hours

R 11 500.00 R 10 500.00 R 2 170.00

Group 1: 08 - 11 Feb

Exam: 12 Feb Group 2: 07 - 10 Mar

Exam: 11 Mar Group 3: 18 - 21 Apr (DBN 1)

Exam: 22 Apr Group 4: 27 - 30 Jun

Exam: 01 Jul Group 5: 25 - 28 Jul Exam: 29 Jul

Visual Testing (VT): Level 2 VT 2.A Training & Qualification Examination

VT 2.1 Forgings;

VT 2.2 Castings;

VT 2.3 Welds

8 hours

R 11 500.00 R 10 500.00 R 2 170.00

Visual Testing (VT): Level 3 NDT Level 3 Basic + VT 2.A Training

& Qualification Examination

16 hours

R 15 750.00 R 15 000.00 R 2 170.00 Group 1: 07 - 11 Nov

Exam: 07 Dec & 12 - 15 Dec

Eddy Currrent Testing (ECT)

Eddy Current Testing (ECT): Level 1 Gr 12 with Maths & Science OR Proficiency Test > 70% - Mandatory

ECT 1.A Pre - & In - Service Testing

ECT 1.1 Surface;

ECT 1.2 Tubes & Bars

40 hours

R 19 900.00 R 18 300.00 R 2 170.00 Group 1: 09 - 20 May

Exam: 23 - 27 May Group 2: 04 - 15 Jul Exam: 18 - 22 Jul

Eddy Current Testing (ECT): Level 2 ECT 1.A Training & Qualification Examination

ECT 2.1 Surface;

ECT 2.2 Tubes & Bars ECT 2.3 Complex Shapes

40 hours

R 19 900.00 R 18 300.00 R 2 170.00 Group 1: 05 - 16 Sep

Exam: 19 - 23 Sep

Advanced Option

Eddy Current Testing (ECT): Level 2

(ECT 2.A Certification) ECT 2.5 Digital Applications &

Signal Analysis

24 hours

R 26 250.00 R 25 000.00 R 2 170.00 Available on request and subject to minimum of 6 students per class Group 6: 01 - 04 Aug (DBN 2)

Exam: 04 Aug Group 7: 29 Aug - 01 Sep

Exam: 02 Sep Group 8: 28 Nov - 01 Dec

Exam: 02 Dec Group 9: 19 - 22 Sep (CPT 1)

Exam: 23 Sep Group 10: 09 - 12 May (CPT 2) Exam: 13 May

Group 1: 11 - 14 Apr

Exam: 15 Apr Group 2: 06 - 09 Jun

Exam: 10 Jun Group 3: 15 - 18 Aug

Exam: 19 Aug Group 4: 10 - 16 Oct

Exam: 14 Oct Group 5: 05 - 08 Dec

Exam: 09 Dec Group 6: 03 - 06 Oct (CPT 1) Exam: 07 Oct

(5)

2016

Training: Non Destructive Testing (NDT)

2016 Industrial

Sector

Product Sector

/ Category

(Single sector available on request)

Duration

(hrs.)

Prices (inclusive of VAT):

Course dates

TRAINING &

Eddy Currrent Testing (ECT)

continued Eddy Current Testing

(ECT): Level 3 NDT Level 3 Basic + ECT 2.A Training &

Qualification Examination

16 hours

R 15 750.00 R 15 000.00 R 2 170.00 Group 1: 14 - 19 Nov

Exam: 08 Dec & 12 - 15 Dec

Radiographic Testing (RT)

Radiographic Testing (RT):

Level 1 Gr 12 with Maths &

Science OR Proficiency Test > 70% - Mandatory

RT 1.A Pre - & In - Service Testing*

DOH RT Safety RT 1.5 X-Ray RT 1.6 Gamma Ray

40 hours

R 28 900.00 R 26 600.00 R 2 170.00

Group 1: 11 - 29 Jan

Exam: 01 - 05 Feb Group 2: 04 - 22 Apr

Exam: 25 - 29 Apr Group 3: 20 Jun - 08 Jul

Exam: 11 - 15 Jul Group 4: 12 - 30 Sep Exam: 03 - 07 Oct

Limited Option:

Level 2 RT 1.A Training &

RT 2.INT Pre - & In - Service Testing Welds & Dense Alloys

Film Interpretation of Welds in Dense Alloys only (No operational RT)

8 hours

R 21 000.00 R 20 000.00 R 2 170.00

Group 1: 01 - 11 Feb (DBN 1)

Exam: 12 Feb Group 2: 15 - 25 Feb

Exam: 26 Feb Group 3: 09 - 19 May

Exam: 20 May Group 4: 23 May - 02 Jun

Exam: 03 Jun Group 5: 30 May - 09 Jun (DBN 2) Exam: 10 Jun

Group 6: 25 Jul - 04 Aug

Exam: 05 Aug Group 7: 12 - 22 Sep (DBN 3)

Exam: 14 Oct Group 9: 20 - 30 Jun (CPT) Exam: 01 Jul

Level 2 RT 1.A Training &

RT 2.A Pre - & In - Service Testing*

RT 2.5 X-Ray RT 2.6 Gamma Ray

40 hours

R 21 000.00 R 20 000.00 R 2 170.00 Group 1: 29 Feb - 11 Mar

Exam: 14 - 18 Mar Group 2: 15 - 26 Aug

Exam: 29 Aug - 02 Sep

Advanced Option:

Level 2 RT 2.A Certification

RT 2.9 Digital Radiography

40 hours

R 26 250.00 R 25 000.00 R 2 170.00 Available on request and subject to minimum of

6 studentsper class

Level 3

NDT Level 3 Basic + RT 2.A Training & Qualification Examination

RT 3.A Pre - & In - Service Testing

16 hours

R 15 750.00 R 15 000.00 R 2 170.00 Group 1: 21 - 25 Nov

Exam: 10 Dec (Sat) & 12 - 15 Dec

*Light Alloys and/or Castings & Forgings are available on request and subject to a minimum of 6 students per class.

(6)

2016

Training: Non Destructive Testing (NDT)

2016 Industrial

Sector

Product

Sector /

Category

Duration

(hrs.)

Prices (inclusive of VAT):

Course dates

TRAINING &

Ultrasonic Testing (UT)

Limited option Ultrasonic Testing (UT):

Level 1 Gr 12 with Maths &

Science OR Proficiency Test > 70% - Mandatory

UT 1.WT Pre - & In - Service Testing

Limited to wall thickness measurement using compression probe only (A-scan

& D-metre)

8 hours

R 10 500.00 R 10 000.00 R 2 170.00

Group 1: 29 Feb - 03 Mar

Exam: 04 - Mar Group 2: 14 - 17 Mar (DBN 1)

Exam: 18 Mar Group 3: 8 - 21 Apr

Exam: 22 Apr Group 4: 03 - 06 May (DBN 2)

Exam: 07 May (Sat) Group 5: 06 - 09 Jun Exam: 10 Jun

Group 6: 11 - 14 Jul

Exam: 15 Jul Group 7: 25 - 28 Jul

Exam: 29 Jul Group 8: 24 - 27 Oct (DBN 3)

Exam: 28 Oct Group 9: 14 - 17 Nov

Exam: 18 Nov Group 10: 05 - 08 Dec (DBN 4)

Exam: 09 Dec

Ultrasonic Testing (UT):

Level 1 Gr 12 with Maths &

Science OR Proficiency Test > 70% - Mandatory

UT 1.A Pre - & In - Service Testing

UT 1.1 Wrought Products UT 1.2 Forgings UT 1.3 Butt Weld in Plate UT 1.4 Butt Weld in Pipe

40 hours

R 26 250.00 R 25 000.00 R 2 170.00

Group 1: 11 - 29 Jan

Exam: 01 - 05 Feb Group 2: 15 Feb - 03 Mar (DBN 1)

Exam: 07 - 11 Mar Group 3: 09 - 27 May

Exam: 30 May - 03 Jun Group 4: 20 Jun - 08 Jul

Exam: 11 - 15 Jul Group 5: 15 Aug - 02 Sep (DBN 2) Exam: 05 - 09 Sep

Group 6: 12 - 30 Sep

Exam: 03 - 07 Oct Group 7: 03 - 20 Oct (DBN 3) Exam: 24 - 28 Oct

Ultrasonic Testing (UT):

Level 2 UT 2.A Certification

2.A Pre - & In - Service Testing

UT 2.1 Wrought Products UT 2.2 Forgings UT 2.3 Butt Weld in Plate UT 2.4 Butt Weld in Pipe UT 2.5 T-joints and other UT 2.6 Nozzles UT 2.7 Nodes

40 hours

R 26 250.00 R 25 000.00 R 2 170.00

Group 1: 08 - 26 Feb

Exam: 29 Feb - 04 Mar Group 2: 04 - 22 Apr

Exam: 25 - 29 Apr Group 3: 20 Jun - 08 Jul (DBN 1)

Exam: 11 - 15 Jul Group 4: 15 Aug - 02 Sep

Exam: 05 - 09 Sep Group 5: 31 Oct - 18 Nov Exam: 21 - 25 Nov

Group 6: 21 Nov - 09 Dec (DBN 2) Exam: 12 - 15 Dec

Advanced option Ultrasonic Testing (UT) Level 2 UT 2.A Certification

UT 2.8 Critical Flaw Sizing

40 hours

R 26 250.00 R 25 000.00 R 2 170.00 Available on request and subject to minimum of 6 students per class

(7)

Training: Non Destructive Testing (NDT)

2016 Industrial

Sector

Product

Sector /

Category

Duration

(hrs.)

Prices (inclusive of VAT):

Course dates

TRAINING &

Ultrasonic Testing (UT)

continued

Advanced option Ultrasonic Testing (UT) Level 2

UT 2.A Certification UT 2.9 Austenitic Stainless

Steel

40 hours

R 26 250.00 R 24 150.00 R 2 170.00 Available on request and subject to minimum of 6 students per class

UT 2.A Certification UT 2.10 UT Phased Array

40 hours

UT 2.A Certification UT 2.11 Time of Flight

Diffraction

40 hours

Ultrasonic Testing (UT) Level 3 NDT Level 3 Basic + UT 2.A Training &

Qualification

UT 3.A Pre - & In - Service Testing

19 hours

R 26 250.00 R 25 000.00 R 2 170.00 Group 1: 28 Nov - 02 Dec Exam: 09 Dec (Sat) & 12 - 15 Dec

NDT Level 3: Basic

NDT Level 3 Basic Gr 12 with Maths & Science Tertiary Qualification Advantageous

& Level 2 Qualification in at least 2 Surface & 1 Volumetric Methods

NDT 3.A Pre - &

In - Service Testing

Part A Materials &

Processes Part B Qual & Cert Schemes Part C NDT Level 2

16 hours

R 15 750.00 R 15 000.00 N/A Group 1: 17 - 21 Oct

Exam: 22 & 23 Oct

Appreciation Courses

Appreciation of NDT for Engineers Pre - & In - Service Testing

N/A

R 10 500.00 R 10 000.00 R 2 170.00 Group 1: 22 - 26 Feb

Exam: N/A Group 2: 18 - 22 Apr (DBN)

Exam: N/A Group 3: 20 May - 03 Jun (CPT)

Exam: N/A Group 4: 26 - 30 Sep

Exam: N/A Group 5: 05 - 08 Dec

Exam: N/A