• No results found

IOT based Biometric Finger Print Electronic Voting System for Rigging Free Governance

N/A
N/A
Protected

Academic year: 2020

Share "IOT based Biometric Finger Print Electronic Voting System for Rigging Free Governance"

Copied!
6
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig 1: Functional block diagram
Fig 2:  Hardware implementation of Biometric finger print based electronic voting system for rigging free governance using IOT
Fig 5: LCD display of voting results
Fig 7: voting results on thingspeak IOT server

References

Related documents

will start at the side of the pipeline or midway between parallel lines. Manual slit trench shall be done along the length of identified underground services at appropriate

Our modern democratic constitutional state is based much more on the outcome of that struggle than the concept of democracy from classical, Greek times.. This outcome also

Soji Solanke: Okay, well, the 600 billion figure, you know, that – you know, that, I think the Central Bank Segun Oloketuyi: Look at the red loans to state, not the bond.. The

In another 4-OTA with only single grounded capacitor for both positive and negative inductor low pass filter, the positive floating inductor shows an exact matching of

GaAs NWs are grown by Ga-assisted chemical beam epitaxy on oxidized Si(111) substrates using triethylgallium and tertiarybutylarsine precursors by a two-steps based

In this regard, the Ministry of Reconstruction’s publication on the occasion of the 50^^ anniversary of the Republic, presented Ankara as a unique Turkish city that had an

Continuous outcomes are compared in Table 8, which documents the number of trials and patients for which the consistently reported outcomes were available, together with the

Regarding to the indigenous trees parts used by local peoples in Ohangwena and Oshikoto regions; roots and leaves where the most frequently used for the treatment of diseases