HIRE - SALES - SERVICE
01420 472692
HOURS OF BUSINESS
Monday - Friday 7.30 AM - 5.00 PM
Saturday - 8.00 AM - 12.00 PM
www.altis.co.uk
No1
For
Hir
e!
Contents
Hire Guide ...3
Contact Us ...4
Access Equipment ...6
Air Equipment...7
Car Equipment...8
Cleaning Equipment ...9
Concrete Breakers ...10
Concrete Mixers ...10
Contractors Equipment ...11
Cordless Equipment ...13
Cutting & Grinding ...13
Decorating & Maintenance ...14
Drilling Equipment ...15
Fixing Equipment ...17
Gardening & Landscaping ...18
Gas Equipment...20
Hammer Drilling ...21
Heating & Drying ...22
Leisure ...23
Lifting ...24
Lighting ...24
Measuring Equipment...25
Plumbing & Electrical ...26
Portable Power Equipment ...28
Pressure Washers...29
Pumps ...30
Sanding ...31
Sawing & Trimming...32
Tiling ...34
Threading...35
Welding ...35
HIRE GUIDE
Hire Guide
•
To hire equipment, we will require some form of positive identification – i.e. Driving Licence, Bankers Card, or if a
Company, a firm’s official order.
•
A deposit – either cash or credit card.
•
IT IS THE RESPONSIBILTY OF THE HIRER TO INSURE THE HIRE EQUIPMENT!
•
Hire periods are quoted in the booklet.
•
All transport charges are quoted on an ‘each way’ basis.
•
Half day hire rates will only be applicable with hire equipment that is collected. If Altis deliver equipment, the
minimum hire is one day.
•
It is essential for someone to be on site that is authorised to sign for the equipment delivered and to pay the
deposit.
•
Hired equipment will continue to be charged for, until the agreement is cancelled. This can be achieved by a
phone call to our office when an OFF HIRE NUMBER should be requested to record the date and time of
conversation or when the equipment is returned to Altis.
•
Fuel is not supplied. There is no guarantee that there will be a large quantity of fuel in the equipment. It is the
hirer’s responsibility to find out the type of fuel required for the equipment before using the equipment.
•
It is advisable to book equipment required at least one week before it is needed.
•
Any defect in hired equipment should be reported immediately, and it must not to be used again until the
customer has spoken to a member of staff at Altis.
•
A cleaning charge will be made on any machine returned in an unreasonable condition. Minimum Cleaning
Charge £15.00.
•
Conditions of hire are printed on the reverse of the hire agreement and should be read
.
•
Safety equipment and instructions will be issued in accordance with our hire contract.
•
All accessories, (Steels, Blades, Abrasives etc. and re-sharpening charges) will be charged extra to the hire cost
on a sale or return basis.
•
Long term hire rates are available on some items – prices on application.
•
Modes of Operation:
Where not obvious the following modes of operation are indicated within the description of the item in the
booklet:
o
Stand
: the equipment is free standing typically on the floor
o
Hand held or Hand Operated
: the equipment is typically held in the hand to operate it.
o
Bench or Bench Type
: the equipment needs a bench or support to operate it (not provided).
•
All hire equipment marked with one star * in the Hire Price List will be supplied with consumables items on a sale
or return basis.
•
All hire equipment marked with two stars ** in the Hire Price List will be subject to a blade/point re-sharpening
charge.
•
All hire equipment marked with three stars *** in the Hire Price List will be supplied with consumable items on sale
only basis.
ALL PRICES IN THIS BOOKLET ARE QUOTED EXCLUSIVE OF VAT
Altis Industries reserve the right to amend, alter or increase the charges shown in this price list, as well as add and
withdraw, or supply alternative specifications of equipment to that shown, at their sole discretion and without prior notice.
Altis Industries Ltd, Liphook Road, Lindford, Bordon, Hants GU35 0PP
Hire and Sales –
01420 472692
Fax: 01420 477363
Contact Us
Contact Us
Main : 01420
472692
Repairs : 01420
476262
Accounts : 01420
487048
Fax
: 01420
477363
Email :
enquiries@altis.co.uk
Website :
www.altis.co.uk
Sat Nav
:
GU35 0PP
Altis
36 Liphook Road
Lindford, Bordon
Hampshire
GU35 0PP
We are constantly adding to our range of products
& hire equipment, please call us if you cannot find
Delivery and Collection
Service
Altis offer a delivery and collection service which is calculated on
the destination of the delivery.
PLEASE NOTE:
•
Whilst every effort will be made to fulfil customers’ requirements, delivery
of certain items cannot be guaranteed before 10.00am.
•
Customers requiring items before this time are advised to obtain them the
previous day.
•
Half day hire rates will only be applicable with hire equipment that is
collected.
•
If Altis deliver and/or collect the equipment, the minimum hire period is
Access Equipment
Access Platforms
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
19 Access Platform (Cherry Picker) – max height 10.3 metres 151.80 94.90 126.50 177.10 215.05 253.00 15 Personnel Lift UL25 – max height 7.6 metres 99.00 61.89 82.50 115.50 140.25 165.00
Bandstands & Boards
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
6 Planks / Scaffold Boards – 8’ long (each) 1.50 1.50 1.50 1.50 1.50 1.50 61 Planks / Scaffold Boards – 13’ long (each) 1.50 1.50 1.50 1.50 1.50 1.50 7 Running Boards / Duct boards – various lengths (each) 15.84 9.90 13.20 18.48 22.44 26.40 9 Steel Tressels / Bandstands (each) Size No 1 – 1’ 7” to 2’ 11” 3.30 3.30 3.30 3.30 3.30 3.30 991 Steel Tressels / Bandstands (each) Size No 2 – 2’ 6” to 4’ 3.30 3.30 3.30 3.30 3.30 3.30 992 Steel Tressels / Bandstands (each) Size No 3 – 3’ 6” to 6’ 3.30 3.30 3.30 3.30 3.30 3.30 11 Tressels / A–frames – Aluminium – Various heights (each) 6.60 4.13 5.50 7.70 9.35 11.00
Ladders
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
16 3 way Combination Ladder 15.84 9.90 13.20 18.48 22.44 26.40 14 Conservatory Ladder 34.32 21.46 28.60 40.04 48.62 57.20 4 Extension Ladder 2 & 3 Section Various Heights – Push Operate 17.16 10.73 14.30 20.02 24.31 28.60 2 Ladder Stays (Stand offs) 3.30 2.75 2.75 3.85 4.68 5.50 3 Roof Ladder – Standard or Extending – Push Operated 17.16 10.73 14.30 20.02 24.31 28.60
Step Ladders
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
17 Groundsman / Hedge Cutting Steps 17.16 14.30 14.30 20.02 24.31 28.60 10 Step Ladders various sizes 1.3 metres to 2.3 metres high 13.20 11.00 11.00 15.40 18.70 22.00 212 Steps Podium 1.2 metres high 13.20 11.00 11.00 15.40 18.70 22.00
Access Equipment continued
Towers
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
1222 Tower Aluminium 7' 10" – 40’ height (base 2’7 x 9’ narrow) 1223 Tower Aluminium 7' 10" – 40’ height (base 2’7 x 6’ narrow) 1224 Tower Aluminium 7' 10" – 40’ height (base 4’7 x 6’ standard) 1225 Tower Aluminium 7' 10" – 40’ height (base 4’7 x 9’ standard)
13 Room Tower – Platform height 410mm – 1660mm 13.20 11.00 11.00 15.40 18.70 22.00 8 Stairwell Tower – 700mm wide from 2.0 metres to 5.0 metres
£4.00 per foot per week
£4.00 per foot per week
£4.00 per foot per week
£15 per metre per week
£4.00 per foot per week
FOR SAFETY SAKE WE RECOMMEND
THE USE OF A SUITABLE SAFETY
HARNESS WHEN USING ACCESS
EQUIPMENT
Air Equipment
Air Compressors
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
27 Compressor – 10 cubic feet / min air delivered – Petrol 39.60 24.76 33.00 46.20 56.10 66.00 28 Compressor – 10 cubic feet / min air delivered – Electric 24.00 15.00 20.00 28.00 34.00 40.00 32 Compressor – 5 cubic feet / min air delivered – Electric 19.80 12.38 16.50 23.10 28.05 33.00
Air Nailers
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
33 Coil Nailer Hitachi NV90AB 45 to 90mm – Hand Held – Air 17.16 10.73 14.30 20.02 24.31 28.60 24 Stapler / Nailer 15 to 32mm – Hand Held – Air 13.20 8.25 11.00 15.40 18.70 22.00
Air Tools
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
23 Blow Gun – Hand Held – Air 6.60 5.50 5.50 7.70 9.35 11.00 31 Grinder 4’’ – Hand Held – Air 13.20 11.00 11.00 15.40 18.70 22.00 22 Hose Air Reel 8 metres 3.30 3.30 3.30 3.30 3.30 3.30 25 Needle Descaling Gun – Hand Held – Air 17.16 10.73 14.30 20.02 24.31 28.60
All prices
exclude VAT
Car Equipment
Car Maintenance Tools
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
40 Pullers and Specialised Garage Tools (each) 10.56 8.80 8.80 12.32 14.96 17.60 42 Punch Number and Letter Set 6.60 5.50 5.50 7.70 9.35 11.00 41 Socket Set – Large – ¾” Drive 14.52 12.10 12.10 16.94 20.57 24.20 36 Torque Wrench – ½" Drive – 40 to 210 newton metres – Hand Held 13.20 11.00 11.00 15.40 18.70 22.00
Cleaning Equipment
Carpet Cleaners
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day * 47 Carpet Cleaner Extraction type 9 Litre Capacity – small – Electric 19.80 12.38 16.50 23.10 28.05 33.00
* 48 Carpet Cleaner Extraction type 15 Litre Capacity – large – Electric 22.44 14.03 18.70 26.18 31.79 37.40
* 481 Carpet Cleaner 45 Litre Capacity – Hot – Electric 52.80 33.01 44.00 61.60 74.80 88.00
* 53 Carpet Doctor (Scrub and Extraction type) – Electric 23.76 14.85 19.80 27.72 33.66 39.60
Floor Polishers & Scrubbers
Code
Description
W/end 1/2 day
1 day
2 day
3 day
7 day
*
52
Floor Polisher – Electric
17.16
10.73
14.30
20.02
24.31
28.60
*
49
Floor Polisher / Scrubber with Liquid Tank – Electric
26.40
16.50
22.00
30.80
37.40
44.00
***
1
Floor Scrubber Drier Karcher BR40/10C - 230v
29.04
18.15
24.20
33.88
41.14
48.40
483
Floor Scrubber Pedestrian Large Karcher – Electric
52.80
33.01
44.00
61.60
74.80
88.00
Vacuum Cleaners
Code
Description
W/end 1/2 day
1 day
2 day
3 day
7 day
*
50
Vacuum Cleaner Dry Industrial – Electric
19.80
12.38
16.50
23.10
28.05
33.00
*
51
Vacuum Cleaner Wet Industrial – Electric
21.12
13.20
17.60
24.64
29.92
35.20
Cleaning Miscellaneous
Code
Description
W/end 1/2 day
1 day
2 day
3 day
7 day
*
55
Steam Cleaner Karcher DE4002 – Electric
25.08
15.68
20.90
29.26
35.53
41.80
*
PLUS CONSUMABLE ITEMS - SALE OR RETURN
**
PLUS BLADE / POINT RE-SHARPENING CHARGE
*** PLUS CONSUMABLE ITEMS - SALE ONLY
Concrete Breakers
Concrete Breakers
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day ** 66 Hydraulic Breaker – Hand Operated – Petrol 39.60 24.76 33.00 46.20 56.10 66.00
** 67 Big Road Breaker Hammer (H90 / 70) – Hand Operated – Electric 29.04 18.15 24.20 33.88 41.14 48.40
** 72 Large Breaker (H65) – Hand Operated – Electric 25.08 15.68 20.90 29.26 35.53 41.80
** 69 Large Breaker (H55) – Hand Operated – Electric 22.44 14.03 18.70 26.18 31.79 37.40
** 256 Medium Breaker / Rotary Hammer Electric (38Y) – Hand Operated – 19.80 12.38 16.50 23.10 28.05 33.00
** 257 Medium Chipping Hammer / Rotary Hammer (DH28) – Hand
Operated – Electric 18.48 11.55 15.40 21.56 26.18 30.80
** 71 Small Chipping Hammer – Hand Operated – Electric 17.16 10.73 14.30 20.02 24.31 28.60
Concrete Mixers
Concrete Mixers
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
56 Concrete mixer – Belle mini mixer complete with stand –
120/90 litres – Electric 16.20 10.13 13.50 18.90 22.95 27.00 57 Concrete mixer – Belle mini mixer complete with stand –
Petrol 120/90 litres 17.40 10.88 14.50 20.30 24.65 29.00 58 Concrete mixer – Belle maxi mixer 120/90 litres – Petrol or
Electric 18.60 11.63 15.50 21.70 26.35 31.00 59 Concrete mixer – 150/100 litres – Diesel or Electric 21.60 13.50 18.00 25.20 30.60 36.00
Please note the mixers above have two measurements input un–mixed / output mixed eg 120 / 90 litre
HIRE – SALES – SERVICE
FOR ALL YOUR PROFESSIONAL / DIY NEEDS
Building, Electrical, Plumbing, Ironmongery, Painting, Decorating, Wood Finishing, Gardening,
Hardware,Hand Tools, Power Tools, Abrasives, Polishing, Safety Footwear, Nuts & Bolts, Key
Cutting, Maglites Victorinox Knies, Mixed Aggregates, Router Cutters, Saw Blades, Jigsaw Blades,
Safety Clothing, Outside Water Fittings, Hammerite, Sadolin, Metpost, Numatic Vacuums,
Silicones, Padlocks, Chains, Submersible Pumps, Generators, Mowers, Ladders, Steps, Felt,
Hoses, Air Fittings, Bullfinch Products, Rain Suits etc, etc
PS - Don't forget TROPHIES/ENGRAVING & BESPOKE
SIGNS
Contractors Equipment
Acros
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
18 Acro Cantilever Support Attachment – Strong boy 3.30 2.75 2.75 3.85 4.68 5.50 1002 Acro Props – Size No 0 size 3' 5" to 6' 2.75 2.75 2.75 2.75 2.75 2.75 1003 Acro Props – Size No 1 size 5' 9" to 10' 3" 2.75 2.75 2.75 2.75 2.75 2.75 1004 Acro Props – Size No 2 size 6' 6" to 11" 2.75 2.75 2.75 2.75 2.75 2.75
Barriers, Cones & Lamps
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
* 82 Line marker for use with aerosol spray cans (various colours) 7.92 6.60 6.60 9.24 11.22 13.20 86 Retractable Barrier Head 6.60 5.50 5.50 7.70 9.35 11.00
* 143 Crowd Barrier (8ft long x 3ft high) – each 8.80 8.80 8.80 8.80 8.80 8.80 1061 Road Barrier 2 metre planks complete with road cone & converte 1.65 1.65 1.65 1.65 1.65 1.65 87 Road cones (18’’ and 30”) – each 1.38 1.38 1.38 1.38 1.38 1.38 88 Road pins 1,300mm long with hook – each 1.00 1.00 1.00 1.00 1.00 1.00 89 Road signs – various signs each 3.85 3.85 3.85 3.85 3.85 3.85
* 106 Site fencing per metre complete with fittings 0.55 0.55 0.55 0.55 0.55 0.55
Block Splitters
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
79 Block pavior splitter – Hand Operated 18.48 11.55 15.40 21.56 26.18 30.80
Diggers & Excavators
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
198 Auger attachment 6" & 9" for 1.5 ton and 3 ton Kubota Diggers 90.00 56.27 75.00 105.00 127.50 150.00
** 197 Breaker (Pecker) attachment for 3 ton Kubota Digger 90.00 56.27 75.00 105.00 127.50 150.00
100 Excavator – Kubota – 1.5Ton – 360 – Digger (with roll cage) – Diesel 150.00 93.78 125.00 175.00 212.50 250.00 114 Excavator – Kubota – 3Ton – 360 – Digger with cab – Diesel 171.00 106.90 142.50 199.50 242.25 285.00
Excavator – Kubota – 3/4Ton – 360 – Digger (with roll cage) 700mm wide/2050mm Height/Max Dig Depth 1705mm/weight 850kgs – Diesel
Contractors Equipment Continued
Dumpers & Barrows
Code
Description
W/end 1/2 day
1 day
2 day
3 day
7 day
240
Dumper 3.5 Ton Swivel – Diesel
95.40
59.64
79.50
111.30
135.15
159.00
101
Skip Loading Dumper – Neuson – 1 Ton Capacity – Diesel
120.00
75.02
100.00
140.00
170.00
200.00
109
Muck Truck – Petrol
39.60
24.76
33.00
46.20
56.10
66.00
99
Wheelbarrow (track driven) 740mm wide/350kg max capacity skip
loading – Petrol
66.00
41.26
55.00
77.00
93.50
110.00
98
Wheelbarrow push – Hand Held
6.00
5.00
5.00
7.00
8.50
10.00
Materials Handling
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
107 Pallet truck – max weight 2000kg – Hand Operated 19.80 16.50 16.50 23.10 28.05 33.00 304 Trolley jack – 2 ton capacity – Hand Operated 10.56 8.80 8.80 12.32 14.96 17.60 90 Sack truck – Hand Operated 7.92 6.60 6.60 9.24 11.22 13.20
Pokers
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
96 Vibrating poker – poker diameter 38mm – Petrol or Electric 27.72 17.33 23.10 32.34 39.27 46.20
Rollers
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
97 Roller Vibrating single drum – diesel 66.00 41.26 55.00 77.00 93.50 110.00 305 Roller Vibrating Trailer
£15 per week minimum charge
Vibrating Plates & Rammers
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
81 Rammer hand 10lbs square base 7.92 6.60 6.60 9.24 11.22 13.20 94 Trench rammer – (Jumping Jack) – Petrol 46.20 28.88 38.50 53.90 65.45 77.00 76 Vibrating plate 300mm – Petrol 27.72 17.33 23.10 32.34 39.27 46.20 95 Vibrating plate 460mm – Petrol 27.72 17.33 23.10 32.34 39.27 46.20 112 Vibrating plate rubber mat 7.92 6.60 6.60 9.24 11.22 13.20
Contractors Equipment Continued
Contractors Equipment Miscellaneous
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
77 Builders small tools 5.28 4.40 4.40 6.16 7.48 8.80 105 Fume / light dust extractor – 12” Electric 18.48 11.55 15.40 21.56 26.18 30.80 188 Padlock & Chain complete with 2 keys 2.75 2.75 2.75 2.75 2.75 2.75 75 Skip ramps each 7.92 6.60 6.60 9.24 11.22 13.20 130 Tile roof cutter – snapper type – Hand Operated 9.24 7.70 7.70 10.78 13.09 15.40
Cordless Equipment
Cordless Tools
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day * 176 Cordless Drill – 24v – impact – battery 23.76 14.85 19.80 27.72 33.66 39.60
* 168 Cordless Combination Drill – impact 10mm or 13mm capacity –
battery 13.20 8.25 11.00 15.40 18.70 22.00 ** 439 Circular Saw – 6” – Electric or Battery 13.20 11.00 11.00 15.40 18.70 22.00 * 446 Jigsaw 18v – Battery 14.52 12.10 12.10 16.94 20.57 24.20
Cutting & Grinding
Cutting & Grinding
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day * 441 Abrasive metal cut off saw – Bench Type – Electric 27.72 17.33 23.10 32.34 39.27 46.20
* 123 Cutter 12” – Hitachi CM12Y– Hand Operated – Electric 26.40 16.50 22.00 30.80 37.40 44.00
* 124 Cutter 12” – Hand Operated – Stihl Petrol 26.40 16.50 22.00 30.80 37.40 44.00
* 127 Cutter 12" – Trolley only – For Stihl Petrol Cutter 19.80 12.38 16.50 23.10 28.05 33.00
* 125 Grinder / Cutter 4” – Hand Operated – Electric 6.60 5.50 5.50 7.70 9.35 11.00
* 132 Grinder / Cutter 4 ½” – Hand Operated – Electric 6.60 5.50 5.50 7.70 9.35 11.00
* 126 Grinder / Cutter 5” – Hand Operated – Electric 6.60 5.50 5.50 7.70 9.35 11.00
Cutting & Grinding Continued
Wall & Brick Chasing
Code
Description
W/end 1/2 day
1 day
2 day
3 day
7 day
***
133
Mortar joint raker – Hand Operated – Electric
15.84
13.20
13.20
18.48
22.44
26.40
**
134
Wall chaser vacuum dust extraction – Electric
19.80
12.38
16.50
23.10
28.05
33.00
**
131
Wall chaser – Electric
27.72
17.33
23.10
32.34
39.27
46.20
Cutting & Grinding Miscellaneous
Code
Description
W/end 1/2 day
1 day
2 day
3 day
7 day
**
443
Alligator saw (block & wood saw) – Hand Held – Electric
17.16
10.73
14.30
20.02
24.31
28.60
121
Bolt croppers – various sizes
10.56
8.80
8.80
12.32
14.96
17.60
*
178
Concrete Planer – Hand Operated – Makita PC1100 – Electric 110V
39.60
24.76
33.00
46.20
56.10
66.00
Decorating & Maintenance
Clamps
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
146 Floor clamps – each 6.60 5.50 5.50 7.70 9.35 11.00 161 G clamps – each 3.96 3.30 3.30 4.62 5.61 6.60 148 Sash clamps – with extension bars – Pair 3.96 3.30 3.30 4.62 5.61 6.60
Damp Proofer
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
*** 142 Damp proofing machine – Electric 34.32 21.46 28.60 40.04 48.62 57.20
*** 145 Chemical spray lance attachment for damp proofing machine
code 142 7.92 6.60 6.60 9.24 11.22 13.20
Stirrers
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
157 Stirrer / whisk – Hand Held – Electric 17.16 10.73 14.30 20.02 24.31 28.60 149 Plaster Tubmix (Belle) 110V only 19.80 12.38 16.50 23.10 28.05 33.00
Decorating & Maintenance Continued
Strippers
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
147 Hot Air Stripper – Hand Held – Electric or Gas 10.56 8.80 8.80 12.32 14.96 17.60
** 160 Stripper planer type for paint work – Hand Held – Electric 15.84 9.90 13.20 18.48 22.44 26.40 155 Wallpaper stripper – Electric 15.84 9.90 13.20 18.48 22.44 26.40 156 Wallpaper Spiker – Hand 3.30 2.75 2.75 3.85 4.68 5.50
Decorating & Maintenance Miscellaneous
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day *** 158 Tape Banding machine (metal strapping) 19mm wide – Hand
Operated 17.16 10.73 14.30 20.02 24.31 28.60 141 Carpet stretcher (knee kicker type) 9.24 7.70 7.70 10.78 13.09 15.40 162 Glass lifter suction type (pair) – Hand Operated 13.20 8.25 11.00 15.40 18.70 22.00 26 Paint Sprayer Turbo Airless – Electric 19.80 12.38 16.50 23.10 28.05 33.00 154 Tyrolean gun – Hand Operated 11.88 9.90 9.90 13.86 16.83 19.80
Drilling Equipment
Angle Drilling
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day * 167 Angle Drill – 10mm chuck capacity – Electric 13.20 8.25 11.00 15.40 18.70 22.00
Drilling Equipment Continued
Core Drilling
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
250 Core drill diamond adaptor kit SDS / HEXAGON 5.28 4.40 4.40 6.16 7.48 8.80
** 172 Drill for diamond core drilling – Hand Held – Electric 19.80 12.38 16.50 23.10 28.05 33.00 23 Diamond Drill Kit for waste pipe 48mm diameter 6.60 5.50 5.50 7.70 9.35 11.00 159 Holesaw kit Tungsten 33mm, 43mm, 53mm, 63mm, 67mm, 73mm, 83mm 17.16 10.73 14.30 20.02 24.31 28.60
Drills & Wrenches
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day * 173 Drill – 13mm chuck capacity – Hand Operated – Petrol 19.80 12.38 16.50 23.10 28.05 33.00
* 169 Drill heavy duty slow speed – 13mm chuck capacity – Hand
Operated – Electric 13.20 8.25 11.00 15.40 18.70 22.00
* 170 Drill Impact VTP13K – 13mm chuck capacity – Hand Operated – Electric 9.24 7.70 7.70 10.78 13.09 15.40
* 171 Drill Impact VTP16AK – 16mm chuck capacity – Hand Operated – Electric 11.88 7.43 9.90 13.86 16.83 19.80
*** 37 Impact Wrench Capacity bolt 12mm – 16mm – Electric 14.52 9.08 12.10 16.94 20.57 24.20
*** 378 Impact Wrench Capacity bolt 16mm – 22mm – Electric 17.16 10.73 14.30 20.02 24.31 28.60
*** 38 Impact Wrench Capacity bolt 10mm – 16mm – Battery 14.52 9.08 12.10 16.94 20.57 24.20
Magnetic Drilling
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day ** 166 Magnetic Broacher / Drill complete with stand – Electric 34.32 21.46 28.60 40.04 48.62 57.20
Tile Drilling
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day ** 177 Tile wet hole cutting kit diamond 11.88 7.43 9.90 13.86 16.83 19.80
Fixing Equipment
Cartridge Guns
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day * 186 Ramsett low velocity cartridge gun – Hand Held 17.16 10.73 14.30 20.02 24.31 28.60
Nailers
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day *** 33 Nailer Air Coil Hitachi NV90AB Various Nail Sizes – 45 to 88mm 17.16 10.73 14.30 20.02 24.31 28.60
*** 189 Floor Board Nailer sizes 1 ½ ” or 1 ¾” or 2’ – Hand Operated 19.80 12.38 16.50 23.10 28.05 33.00
*** 35 Hard Board Nailer 1" capacity – Hand Operated 13.20 8.25 11.00 15.40 18.70 22.00
*** 34 Brad nailer various nail sizes – 32 to 65mm – Hand Operated – Gas 17.16 10.73 14.30 20.02 24.31 28.60
*** 39 Nailer Hitachi various nail sizes – 50 to 90mm – Hand Operated – Ga 19.80 12.38 16.50 23.10 28.05 33.00
Rivet & Fasteners
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day *** 181 Rivet gun – Hand Operated plier type 7.92 6.60 6.60 9.24 11.22 13.20
*** 180 Ring fastener gun – Hand Operated 9.24 7.70 7.70 10.78 13.09 15.40
Screwdrivers
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day *** 193 Screwdriver automatic (25 – 57mm) – Hand Operated – Electric 17.16 10.73 14.30 20.02 24.31 28.60
*** 190 Teks type screw gun – Hand Operated – Electric 14.52 9.08 12.10 16.94 20.57 24.20
Staplers / Nailers
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day *** 24 Stapler / nailer various sizes 15 to 32mm – Hand Operated – Air 13.20 8.25 11.00 15.40 18.70 22.00
*** 187 Stapler – Arrow T50 hammer action – Hand Operated 6.60 5.50 5.50 7.70 9.35 11.00
*** 183 Stapler – Arrow HT65 large hammer action – Hand Operated 9.24 7.70 7.70 10.78 13.09 15.40
*** 182 Stapler – Arrow HT50 – Hand Operated 6.60 5.50 5.50 7.70 9.35 11.00 Various sizes of arrow staples available Sale Only
Fixing Equipment Continued
Fixing Equipment Miscellaneous
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
179 Application gun – 380ml tube size – Hand Operated 6.60 5.50 5.50 7.70 9.35 11.00
*** 192 Eyeleting tool (Internal Diameter 16mm – Outside Diameter 30mm) – Hand Operated 7.92 6.60 6.60 9.24 11.22 13.20
Gardening & Landscaping
Hedge Trimmers & Pruners
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
* 207 Hedge trimmer – cutting bar length 30” – Petrol 33.00 20.63 27.50 38.50 46.75 55.00 206 Hedge trimmer – cutting bar length 24” – Electric 19.80 12.38 16.50 23.10 28.05 33.00 * 230 Hedge trimmer long arm – arm length 2350mm – Petrol 35.64 22.28 29.70 41.58 50.49 59.40 211 Pruners – long arm size from 2.0 to 3.8 metres – Hand Operated 7.92 6.60 6.60 9.24 11.22 13.20
Log Splitters
Code
Description
W/end 1/2 day
1 day
2 day
3 day
7 day
213
Log splitter – Electric
35.64
22.28
29.70
41.58
50.49
59.40
20
Log splitter – Trailer Mounted – Petrol
53.40
33.38
44.50
62.30
75.65
89.00
Mowers & Cutters
Code
Description
W/end 1/2 day
1 day
2 day
3 day
7 day
202
Grass cutter Honda rotary for long grass power driven – 21’’ cut – Petrol
34.32
21.46
28.60
40.04
48.62
57.20
203
Mower 52cm (21") self propelled – Petrol
26.40
16.50
22.00
30.80
37.40
44.00
237
Flail Mower 50cm (21") Makita FLG5000 – Petrol
69.00
43.14
57.50
80.50
97.75
115.00
238
Scythe – blade length 32" – power driven – Petrol
66.00
41.26
55.00
77.00
93.50
110.00
Gardening & Landscaping Continued
Post Hole Borers
Code
Description
W/end 1/2 day
1 day
2 day
3 day
7 day
*
217
Post hole borer – hole size available 75mm, 100mm & 150mm – 1 man
operated – Petrol
34.32
21.46
28.60
40.04
48.62
57.20
*
218
Post hole borer – hole sizes available 100, 150 & 250mm – 2 man operated
– Petrol
42.24
26.41
35.20
49.28
59.84
70.40
216
Post hole borer – sizes avilable 100, 150 & 250mm – Hand Operated
6.60
5.50
5.50
7.70
9.35
11.00
Rotovators & Tillers
Code
Description
W/end 1/2 day
1 day
2 day
3 day
7 day
194
Rotovator – 11 HP – (820wX2000L) power driven – Diesel
79.20
49.51
66.00
92.40
112.20
132.00
215
Rotovator – 8 HP – (530wX1700L) power driven – Petrol
48.84
30.53
40.70
56.98
69.19
81.40
214
Tiller – Petrol
26.40
16.50
22.00
30.80
37.40
44.00
Scarifiers & Aerators
Code
Description
W/end 1/2 day
1 day
2 day
3 day
7 day
236
Lawn aerator – hollow or solid tine – power driven – Petrol
52.80
33.01
44.00
61.60
74.80
88.00
208
Scarifier Lawn – push operated – Electric
26.40
16.50
22.00
30.80
37.40
44.00
209
Scarifier Lawn – push operated – Petrol
30.36
18.98
25.30
35.42
43.01
50.60
Shredders & Chippers
Code
Description
W/end 1/2 day
1 day
2 day
3 day
7 day
205
Shredder / Chipper (150mm maximum timber diameter) Timberwolf
TW150DHB Towable with ball hitch coupling – Diesel
162.00
101.28
135.00
189.00
229.50
270.00
195
Shredder Timberwolf up to 75mm maximum timber diameter – Petrol
79.20
49.51
66.00
92.40
112.20
132.00
Strimmers & Brush Cutters
Code
Description
W/end 1/2 day
1 day
2 day
3 day
7 day
*
2261
Brush cutter – including cutting blade – Petrol
33.00
20.63
27.50
38.50
46.75
55.00
**
226
Strimmer – with nylon blades – Petrol – Hand Operated
30.36
18.98
25.30
35.42
43.01
50.60
Gardening & Landscaping Continued
Stump Grinders
Code
Description
W/end 1/2 day
1 day
2 day
3 day
7 day
*
222
Stump grinder – Petrol
85.80
53.64
71.50
100.10
121.55
143.00
Turf Cutters
Code
Description
W/end 1/2 day
1 day
2 day
3 day
7 day
234
Turf cutter power driven – Petrol
48.84
30.53
40.70
56.98
69.19
81.40
227
Turfing Iron – Hand Operated
7.92
6.60
6.60
9.24
11.22
13.20
Gardening & Landscaping Miscellaneous
Code
Description
W/end 1/2 day
1 day
2 day
3 day
7 day
*
233
Air broom / vacuum hand held – Petrol
18.48
11.55
15.40
21.56
26.18
30.80
***
244
Blow Torch single, double, treble and quad head available – Hand Held –
large – Gas
9.24
7.70
7.70
10.78
13.09
15.40
201
Fertiliser spreader – Rotary push
10.56
8.80
8.80
12.32
14.96
17.60
210
Leaf collector – push operated – Petrol
26.40
16.50
22.00
30.80
37.40
44.00
219
Post rammer – tubular type – Hand Operated
7.92
6.60
6.60
9.24
11.22
13.20
204
Roller garden – 30" Wide water filled – Push Operated
7.92
6.60
6.60
9.24
11.22
13.20
225
Shuv holer (hole marker & soil remover) – Hand Operated
7.92
6.60
6.60
9.24
11.22
13.20
235
Trencher 6", 10" & 15" depth x 4" wide Camon TR12 – Petrol
85.80
71.50
71.50
100.10
121.55
143.00
229
Wire strainer / tensioner – Hand Operated
5.28
4.40
4.40
6.16
7.48
8.80
Gas Equipment
Gas Torches
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
*** 243 Blow Torch – Hand Held – small – Gas 7.92 6.60 6.60 9.24 11.22 13.20 *** 244 Blow Torch single, double, treble and quad head available –
Gas Equipment Continued
Gas Rings
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
*** 241 Boiling ring – Gas 7.92 6.60 6.60 9.24 11.22 13.20
Tar & Pitch Boilers
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
*** 245 Pitch / Tar Boiler complete with Bucket & ladle – Gas 19.80 12.38 16.50 23.10 28.05 33.00
Hammer Drilling
Cordless Hammer
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
*** 260 Drill SDS hammer – Battery 11.88 7.43 9.90 13.86 16.83 19.80
Core & Drill Bits Tungsten
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
** Long Masonary Drills 10mm to 50mm diameter Short SDS Masonary Drills from 6mm to 24mm diameter
wear charge according to size
Sale Only
Hammer Drills
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
** 255 Drill – Rotary Hammer 50mm capacity – Hand Operated – Electric 22.44 14.03 18.70 26.18 31.79 37.40 ** 256 Drill – Rotary Hammer 38mm capacity – Hand Operated – Electric 19.80 12.38 16.50 23.10 28.05 33.00 ** 257 Drill – Rotary Hammer 28mm capacity – Hand Operated – Electric 18.48 11.55 15.40 21.56 26.18 30.80 *** 258 Drill – Rotary Hammer 25mm capacity – Hand Operated – Electric 15.84 9.90 13.20 18.48 22.44 26.40
Heating & Drying
Air Conditioners
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
268 Air conditioning unit – portable – Electric 34.32 21.46 28.60 40.04 48.62 57.20
Air Movers
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
267 Air blower – Hand Held – Electric 10.56 8.80 8.80 12.32 14.96 17.60 105 Air blower / fume extractor 6” – Electric 18.48 11.55 15.40 21.56 26.18 30.80 302 Air Mover – Electric 19.80 16.50 16.50 23.10 28.05 33.00 269 Cooling fan 16” Oscillating – Electric 6.60 5.50 5.50 7.70 9.35 11.00
Dehumidifiers & Building Dryers
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
281 Dehumidifier / Building Dryer – compact – Electric 22.44 14.03 18.70 26.18 31.79 37.40 282 Dehumidifier / Building Dryer – large on wheels – Electric 30.36 18.98 25.30 35.42 43.01 50.60
Electric Blow Heaters
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
270 Fan heater 3 kilowatt thermostatic control – Electric 15.84 13.20 13.20 18.48 22.44 26.40
Gas Blow Heaters
Code
Description
W/end 1/2 day
1 day
2 day
3 day
7 day
***
278
Heater 34,000 BTU – Gas / Electric
17.16
10.73
14.30
20.02
24.31
28.60
***
272
Heater 85,000 – 150,000 BTU – Gas / Electric
19.80
12.38
16.50
23.10
28.05
33.00
***
273
Heater 90,000 – 280,000 BTU – Gas / Electric
23.76
14.85
19.80
27.72
33.66
39.60
Paraffin Heaters
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
274 Heater – small – approx 30,000 BTU’s Paraffin / Electric 15.84 9.90 13.20 18.48 22.44 26.40 275 Heater – medium – approx 90,000 BTU – Paraffin / Electric 19.80 12.38 16.50 23.10 28.05 33.00
Heating & Drying Continued
Radiant Heaters
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
*** 271 Heater – Cabinet – Gas 5.28 4.40 4.40 6.16 7.48 8.80 285 Heater – 1.5 & 3 kilowatt Infrared – Electric 14.52 9.08 12.10 16.94 20.57 24.20 280 Heater – 1.5 & 3 kilowatt Radiant – Electric 13.20 8.25 11.00 15.40 18.70 22.00
Leisure
Marquees
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
199 Marquee 6 metres wide x 12 metres long 382.99 319.16 319.16 446.82 542.57 638.32 196 Marquee 6 metres wide x 8 metres long 297.88 248.24 248.24 347.53 422.00 496.47 191 Marquee 6 metres wide x 4 metres long 212.77 177.31 177.31 248.23 301.42 354.61
If you would like us to put the Marquee up, please contact us for prices
Sound Equipment
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
296 Loud Hailer – battery 17.16 10.73 14.30 20.02 24.31 28.60 294 P.A. system – battery or mains 39.60 24.76 33.00 46.20 56.10 66.00
Leisure Miscellaneous
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
Lifting
Buckets
Code
Description
W/end 1/2 day 1 day
2 day
3 day
7 day
102
Bumpa Buckets (Set of 5)
3.00
2.50
2.50
3.50
4.25
5.00
12
Bumpa for Tiles, Bricks, Blocks and Mortar
90.00
75.00
75.00
105.00
127.50
150.00
Contractors Lift
Code
Description
W/end 1/2 day 1 day
2 day
3 day
7 day
200
Contractors Lift – 300kg Max Capacity Lift & 18' maximum high
(Sumner) – Hand Operated
99.00
61.89
82.50
115.50
140.25
165.00
Engine Hoist
Code
Description
W/end 1/2 day 1 day
2 day
3 day
7 day
303
Engine hoist – hydraulic (max loading 750kg)
21.12
13.20
17.60
24.64
29.92
35.20
Lighting
Lighting
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
* 314 4 Head Mast Light 5m high / 14m cable – 100v –- Electric 12.00 7.50 10.00 14.00 17.00 20.00 * 311 Festoon lighting (1metre spacing – 10 bulbs) – 240v & 110v – Electric 7.92 6.60 6.60 9.24 11.22 13.20 * 313 Floodlight mini pod 500 watt – 240v & 110v – Electric 5.28 4.40 4.40 6.16 7.48 8.80 * 312 Floodlight on tripod – 500 watt – 240v & 110v – Electric 6.60 5.50 5.50 7.70 9.35 11.00 * 316 Fluorescent Site light on tripod – 110v – Electric 7.92 6.60 6.60 9.24 11.22 13.20
Lead lamp – 60 watt – Electric – Hand Held
* 310 Party Lights 240v coloured – Electric 7.92 6.60 6.60 9.24 11.22 13.20 315 Task flood light – 240v & 110v – Hand Held – Electric 6.60 5.50 5.50 7.70 9.35 11.00
Measuring Equipment
Damp Meters
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
326 Damp meter – Hand Held – Battery 9.24 5.78 7.70 10.78 13.09 15.40
Detectors
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
330 Detector Metal – Hand Held – Battery 18.48 11.55 15.40 21.56 26.18 30.80 339 Gas detector – Hand Held – Battery 10.56 6.60 8.80 12.32 14.96 17.60 331 Metal drain cover locator – Hand Held – Battery 21.12 13.20 17.60 24.64 29.92 35.20
Distance Measuring
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
333 Distance measuring wheel – Hand Held 9.24 5.78 7.70 10.78 13.09 15.40
Levels
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
327 Dumpy site level kit – inc staff & tripod 25.08 15.68 20.90 29.26 35.53 41.80 340 Site Level Laser rotating – self leveling including staff, tripod & sensor – Battery 34.32 21.46 28.60 40.04 48.62 57.20
Locators
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
322 Cable avoidance tool C.A.T – Hand Held – Battery 22.44 14.03 18.70 26.18 31.79 37.40 337 Inspection Camera with LCD Screen 18.00 7.50 15.00 21.00 25.50 30.00 338 Locator attachment (mouse) for drain rods – used in conjuction with CAT code 322 – Battery 12.00 7.50 10.00 14.00 17.00 20.00 323 Genny transmitter – Signal Generator for CAT code 322 – Batter 22.44 14.03 18.70 26.18 31.79 37.40
Noise Meters
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
332 Noise meter – Hand Held – Battery 10.56 8.80 8.80 12.32 14.96 17.60
Measuring Miscellaneous
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
Plumbing & Electrical
Drainage
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
381 Drain cover lifting keys – pair 5.50 5.50 5.50 5.50 5.50 5.50 375 Drain Pump & Bag Kit 4" & 6" 5.28 4.40 4.40 6.16 7.48 8.80 376 Drain rods – set of 10 rods (30ft) complete with clearing worm &
plunger 9.24 7.70 7.70 10.78 13.09 15.40 377 Drain snake – Hand Operated 11.88 9.90 9.90 13.86 16.83 19.80 379 Plunger drain cleaning – Pump type 11.88 9.90 9.90 13.86 16.83 19.80 * 301 Plunger pressurised Toilet/Sink – Gas 10.56 8.80 8.80 12.32 14.96 17.60
Freezers
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
382 Pipe Freezer Kit – 110v – Electric 33.00 20.63 27.50 38.50 46.75 55.00
Pipe Benders
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
370 Pipe bender copper sizes available 15mm & 22mm – Hand
Operated 6.60 5.50 5.50 7.70 9.35 11.00 384 Pipe bender copper – sizes available 15, 22, 28 & 35mm –
complete with stand – Hand Operated 19.80 12.38 16.50 23.10 28.05 33.00 371 Pipe bender (steel) various sizes from 10mm to 32mm – Hand
Operated – Hydraulic 23.76 14.85 19.80 27.72 33.66 39.60
Pressure Testing
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
380 Drain test kit complete with monometer, bungs etc 9.24 7.70 7.70 10.78 13.09 15.40 396 Pressure tester – water filled with pump 21.12 17.60 17.60 24.64 29.92 35.20 3961 Water Pressure Gauge 9.24 7.70 7.70 10.78 13.09 15.40
Plumbing & Electrical Continued
Spanners & Keys
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
390 Tap Spanner 5.50 5.50 5.50 5.50 5.50 5.50 398 Box Spanners (set of various sizes) 7.92 6.60 6.60 9.24 11.22 13.20 383 Immersion Spanner box or ring 4.40 4.40 4.40 4.40 4.40 4.40 388 Pipe Wrench / Stilsons – various sizes available 7.92 6.60 6.60 9.24 11.22 13.20 397 Stopcock key (universal) 6 stopcock sizes available – Hand
Operated 5.50 5.50 5.50 5.50 5.50 5.50
Plumbing Miscellaneous
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
*** 373 Central heating flusher & descaler unit - 230V only 48.00 30.01 40.00 56.00 68.00 80.00 3761 Chimney sweeping – set of 10 rods (30ft) complete with
chimney brush 9.24 7.70 7.70 10.78 13.09 15.40 389 Tap re–seating tool – Hand Operated 5.50 5.50 5.50 5.50 5.50 5.50 391 100mm Tube cutter – Hand Operated 10.56 8.80 8.80 12.32 14.96 17.60
*** PLUS
CONSUMABLE
ITEMS - SALE ONLY
**
PLUS BLADE / POINT RE-SHARPENING CHARGE
* PLUS
CONSUMABLE
ITEMS - SALE OR RETURN
Portable Power Equipment
Site Generators
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
352 Generator portable 2KVA – Petrol 23.76 14.85 19.80 27.72 33.66 39.60 353 Generator portable 3KVA – Petrol 30.36 18.98 25.30 35.42 43.01 50.60 354 Generator portable 4KVA – Petrol 31.68 19.81 26.40 36.96 44.88 52.80 355 Generator portable 5KVA – Petrol or diesel 34.32 21.46 28.60 40.04 48.62 57.20
Silent Generators
Code
Description
W/end
1/2 day
1 day
2 day
3 day
7 day
366
Generator portable silent 1KVA – Petrol
22.44
14.03
18.70
26.18
31.79
37.40
336
Generator portable silent 2KVA – Petrol
24.00
15.00
20.00
28.00
34.00
40.00
356
Generator 6 kilowatt portable silent – Petrol or Diesel
40.92
25.58
34.10
47.74
57.97
68.20
367
Generator portable silent 8KVA – Diesel
55.44
34.66
46.20
64.68
78.54
92.40
104
Generator silent 20 KVA. Trailer Mounted – Diesel
108.00
90.00
90.00
126.00
153.00
180.00
Leads Electrical
Code
Description
W/end 1/2 day
1 day
2 day
3 day
7 day
351
Extension lead – 240v & 110v
362
Generator fly lead – 240v & 110v
2.50
2.50
2.50
2.50
2.50
2.50
357
Splitter box – four way – 110 or 230V
3.30
2.75
2.75
3.85
4.68
5.50
368
415 Volt (3 phase) Extension Lead 14m
13.20
11.00
11.00
15.40
18.70
22.00
Minimum Charge of £3.00 per week
Electric Safety
Code
Description
W/end
1/2 day
1 day
2 day
3 day
7 day
361
Circuit Breaker Residual Current Device on lead
5.50
5.50
5.50
5.50
5.50
5.50
360
Circuit Breaker Residual Current Device Plug – in
2.50
2.50
2.50
2.50
2.50
2.50
Portable Power Equipment Continued
Transformers
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
359 Transformer, site – 10KVA continuous at 10kva – site connection 34.32 21.46 28.60 40.04 48.62 57.20 365 Transformer, portable – 5KVA continuous at 2.7kva – 240v 15.84 9.90 13.20 18.48 22.44 26.40 358 Transformer, portable – 3.3KVA continuous at 2kva – 240v
Minimum Charge of £3.50 per week
Portable Power Equip Miscellaneous
Code
Description
W/end
1/2 day
1 day
2 day
3 day
7 day
350
Battery charger / starter – Electric
10.56
8.80
8.80
12.32
14.96
17.60
Pressure Washers
Pressure Washers
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
400 Pressure Washer – Cold water – max pressure 155 bar – Electric 27.72 17.33 23.10 32.34 39.27 46.20 401 Pressure Washer – Cold water – max pressure 140 bar – Petrol 36.96 23.11 30.80 43.12 52.36 61.60 402 Pressure Washer – Hot water – max pressure 120 bar – Electric 56.76 35.48 47.30 66.22 80.41 94.60
Pressure Washer Accessories
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
403 Extension pressure hose (20 metres) for use with our pressure
washers 7.92 6.60 6.60 9.24 11.22 13.20 411 Drain clearing attachment – for use with our pressure washer 7.92 4.95 6.60 9.24 11.22 13.20 404 Rotary nozzle attachment used with our pressure washers 4.40 4.40 4.40 4.40 4.40 4.40 4031 Hard Surface cleaning attachment used with our pressure washers 7.92 4.95 6.60 9.24 11.22 13.20
Pumps
Centrifugal & Diaphragm Pumps
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
414 Pump – 2” Water / Sludge complete with hoses – Petrol 30.36 18.98 25.30 35.42 43.01 50.60 413 Pump 2” Centrifugal Water Pump complete with hoses – Petrol 27.72 17.33 23.10 32.34 39.27 46.20 412 Pump 2” Trash Centrifugal complete with hoses – Petrol 30.36 18.98 25.30 35.42 43.01 50.60
Submersible Pumps
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
409 Puddle Pump – 1” complete with hoses – (low level pick–up 1mm of floor level) – Electric 19.80 12.38 16.50 23.10 28.05 33.00 415 Pump – 1” complete with hoses – Electric 17.16 10.73 14.30 20.02 24.31 28.60 416 Pump – 2” complete with hoses – Electric 19.80 12.38 16.50 23.10 28.05 33.00
Hoses
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
418 Pump Hose Extension 50mm x 10 metres 3.96 2.48 3.30 4.62 5.61 6.60
Pumps Miscellaneous
Code Description W/end 1/2 day 1 day 2 day 3 day 7 day
410 Pump fuel oil complete with hoses – Electric 18.48 11.55 15.40 21.56 26.18 30.80 420 Pond Pump complete with hoses – Electric 18.00 11.25 15.00 21.00 25.50 30.00 417 Wet vac complete with integral pump and hoses – Electric 27.72 17.33 23.10 32.34 39.27 46.20