SECTION 5 MATERIAL ENGINEERING
MECHANICAL ENGINEERING TECHNOLOGIES
SUBSECTION 5A MECHANICAL ENGINEERING TECHNOLOGIESMonday, June 22, 2015 15:00 – 17:00
Chairpersons: prof. Dr. Ing. Miroslav Neslušan Ing. Vladimír Bulej, PhD.
DURSTOVÁ, ZUZANA – NESLUŠAN, MIROSLAV, Žilina, Slovak Republic: Influence of Tool Wear and Sample Hardness on Barkhausen Noise after Hard Turning
MAKIEŁA, WŁODZIMIERZ – GOGOLEWSKI, DAMIAN, Kielce, Poland: The Comparison of Surface Stereometry Using Hotelling T2 Test
GORYCKI, ŁUKASZ, Kielce, Poland: Analysis of the Impact of the Cage Type on the Frictional Moment Ball Bearings.
HOLUBJÁK, JOZEF – CZÁN, ANDREJ – ŠAJGALÍK, MICHAL – DRBÚL, MÁRIO – PIEŠOVÁ, MARIANNA – KUZDÁK, VIKTOR, Žilina, Slovak Republic: Deformation Zones Verification of Nickel Alloys by Implementation of Multi-parametric Measuring System
HRABOVSKÝ, TOMÁŠ – BLAŽEK, DALIBOR – NESLUŠAN, MIROSLAV, Žilina, Slovak Republic: Evaluation of Magnetically Oriented Surface after Hard Milling Cycles
KORDÍK, MAREK – ČILLIKOVÁ, MÁRIA, Žilina, Slovak Republic: Comparison of the Properties of Coatings and Coating Methods
KRAJCARZ, DANIEL, Kielce, Poland: Influence of Selected Water-jet Cutting Parameters on Surface Quality Aluminium Alloy
MAJ, PIOTR – MIKO, EDWARD, Kielce, Poland: Review of Factors Affecting on the Accuracy Dimensionally-contoured Manufactured Items on Numerically Controlled Milling Machines
MARTIKÁŇ, ANTON – SORDI, VITOR LUIZ – PETRU, JANA – CZÁN, ANDREJ – ŠAJGALÍK, MICHAL – STRÚHARŇANSKÝ, JOZEF, Žilina, Slovak Republic: Analyze of Surface Integrity of Ausgaging Construction Parts from Nuclear Reactor Austenitic Steel
RENGEVIČ, ALEXANDER – KUMIČÁKOVÁ, DARINA, Žilina, Slovak Republic: Safety Cooperation between Human and Robot
SKRZYNIARZ, MICHAŁ – MIKO, EDWARD – NOWAKOWSKI, ŁUKASZ, Kielce, Poland: Determination of Minimum Uncut Chip Thickness in Turning
SPIŠÁK, PETER – MADAJ, RUDOLF – SÁSIK, RÓBERT, Žilina, Slovak Republic: Implementation of the Model Trucks FTS Using 3D Printing
STANČEK, JÁN – URÍČEK, JURAJ – BULEJ, VLADIMÍR, Žilina, Slovak Republic: Possibilities of Renewal Energy Sources for Electric Vehicles
STRUHARŇANSKÝ, JOZEF – PIEŠOVÁ, MARIANNA, Žilina, Slovak Republic: Evaluation of Stress Conditions in Turning with Rotating Tool
S690 after Laser and Plasma Beam Cutting
ZMARZŁY, PAWEŁ, Kielce, Poland: Computer Analysis of Three-points References Method Parameters to Waviness Measurement of Cylindrical Surfaces
BAŃKOWSKI, DAMIAN – KRAJCARZ, DANIEL – MŁYNARCZYK, PIOTR, Kielce, Poland: Review of Machines for Finishing Processes with Smoothing Vibratory Media
DEBNÁROVÁ, LENKA – KURIC, IVAN, Žilina, Slovak Republic: Methodology of Group Technology and Classification for Technical Production Planning
NOVOSAD, MILAN – KURIC, IVAN, Žilina, Slovak Republic: Machine Tool Verification KMIECIK-SOŁTYSIAK, URSZULA – ADAMCZAK, STANISLAV, Kielce, Poland: The Application of Optical Methods for Measuring Roundness Profiles
ULBRICH, DARIUSZ – KOWALCZYK, JAKUB – SAWCZUK, WOJCIECH, Poznan, Poland: Assessment of the Possibilities of Using Ultrasonic Method for Testing the Quality of Adhesive Joints Type Metal - Metal
KULPA, JAKUB – WITKOWSKI, GRZEGORZ, Kielce, Poland: Multisensensory Measurements in Modern Production Techniques
SUBSECTION 5B MATERIAL ENGINEERING
Tuesday, June 23, 2015 9:00 – 12:00
Chairpersons: Assoc. Prof. Wojciech Żórawski Ing. Alan Vaško, PhD.
BAČA, ADRIÁN – KONEČNÁ, RADOMILA – NICOLETTO, GIANNI, Žilina, Slovak Republic: Microstructural and Mechanical Properties of Ti6Al4V Alloy Produced by SLM and EBM
BÍREŠOVÁ, JANA – HOCKICKO, PETER, Žilina, Slovak Republic: Investigation of Behavior of Metaphosphate Glass for the Ba(PO3)2 Composition by Means of Dielectric Relaxation
Spectroscopy
ČIERNY, JAROSLAV – PATSCH, MAREK – MALCHO, MILAN, Žilina, Slovak Republic: Long-Term Operation and Measurement Parameters of Working Stirling Engine Type Gamma DRESSLEROVÁ, ZUZANA – PALČEK, PETER – CHALUPOVÁ, MÁRIA – UHRÍČIK, MILAN, Žilina, Slovak Republic: Effect of Cyclic Loading on the Internal Damping of AZ31 and AZ91 Magnesium Alloys
KAPUSŇÁK, MICHAL – PETZOVÁ, JANA – KUPČA, ĽUDOVÍT – BŘEZINA, MARTIN, Trnava, Slovak Republic: Evaluation of Initial Mechanical Properties of Surveillance Specimens for Mochovce Nuclear Power Plant Units 3 and 4
LAGO, JÁN – BOKŮVKA, OTAKAR – NOVÝ, FRANTIŠEK – JANČOVIČ, PETER, Žilina, Slovak Republic: Possibilities of Laser Beam Using for Increasing the Fatigue Life of Welded Domex® Steel by Remelting the Weld Toe
LOVÍŠEK, MARTIN – LIPTÁKOVÁ, TATIANA, Žilina, Slovak Republic: Electrochemical Characteristics of Aluminum Brass
OMASTA, MIROSLAV – HADZIMA, BRANISLAV, Žilina, Slovak Republic: Electrochemical Characteristics of Elektron 21 Magnesium Alloy with Octacalcium Phosphate (OCP) Coating ORAVCOVÁ, MONIKA – PALČEK, PETER – ZATKALÍKOVÁ, VIERA – CHALUPOVÁ, MÁRIA, Žilina, Slovak Republic: The Effect of Heat Treatment on Structure Stability of AISI 316Ti
PATSCH, MAREK – ČIERNY, JAROSLAV, Žilina, Slovak Republic: Operation and Measuring the Emissions of the Fuel Cell
SOVIAROVÁ, ANDREA – TROJANOVÁ,ZUZANKA – PALČEK, PETER – CHALUPOVÁ, MÁRIA – KNAPEK, MICHAL, Žilina, Slovak Republic: Monitoring of Microstructural Changes in AZ91 Magnesium Alloy by Internal Damping Measurement
ŠVECOVÁ, IVANA – TILLOVÁ, EVA – BORKO, KAMIL – CHALUPOVÁ, MÁRIA, Žilina, Slovak Republic: Effect of Modifying Process on Si-Morphology and Mechanical Properties in Secondary AlSi10MgMn Cast Alloy
BEK, MARKO – GONZALEZ-GUTIERREZ, JOAMIN – EMRI, IGOR, Ljubljana, Slovenia: Granular Flow Apparatus for Flowability Measurements of Granular Materials
KRANJEC, MATEJ – KUNC, ROBERT – PREBIL, IVAN, Ljubljana, Slovenia Finite Element Stress-Strain Numerical Analysis of Response of the Achilles Tendon
OBLAK, PAVEL – GONZALEZ-GUTIERREZ, JOAMIN – ZUPANČIČ, BARBARA – AULOVA, ALEXANDRA – EMRI, IGOR, Ljubljana, Slovenia: Effect of Extensive Recycling on High Density Polyethylene (HDPE) Mechanical Properties
SZWED, BARTŁOMIEJ - KONIECZNY, MAREK, Kielce, Poland: Characterization of Solid-state Diffusion Joints between Titanium and Stainless Steel Using Nickel Interlayer
SUBSECTION 5B MATERIAL ENGINEERING
Tuesday, June 23, 2015 14:00 – 17:00
Chairpersons: prof. P.Cz. dr hab. inż. Robert Ulewicz Ing. Juraj Belan, PhD.
BELKA, RADOSŁAW – KOWALSKI, SZYMON – ŻÓRAWSKI, WOJCIECH – SUCHAŃSKA, MAŁGORZATA, Kielce, Poland: A Study of Plasma Sprayed HAp Coatings Using the EDX and Raman Methods
BOLANOWSKI, PAWEŁ, Kielce, Poland: The Microstructure According to the Welding TTT Curve in Comparison with the Microstructure of the Real Welded Joint by Using the Example of Welded 900A Steel
BUCKI, TOMASZ – MOLA, RENATA – DZIADOŃ, ANDRZEJ, Kielce, Poland: Surface Alloying of Magnesium by GTAW Using AlMg4.5Mn Wire
DZIOBA, IHOR – FURMAŃCZYK, P., Kielce, Poland: Determining the Critical Value of Fracture Toughness Using the Measurement of the Stretch Zone Width
DZIOBA, IHOR – LIPIEC, SEBASTIAN, Kielce, Poland: Calculation the Stress Distribution σ22 in front of the Crack in Ductile Iron ADI
GÓRAL, ANNA – SOKOŁOWSKI, KRZYSZTOF – ŻÓRAWSKI, WOJCIECH – MAKRENEK, MEDARD, Krakow, Poland: Microstructure of Plasma Sprayed ZrO2
-8Y2O3Coatings
JANUS, URSZULA, Kielce, Poland: Energy Analysis in Ultra-High Strength Steel. Microscopic Observations
KOZIOR, TOMASZ, Kielce, Poland: Stress Relaxation in SLS Additive Technology
MAKRENEK, MEDARD – PAJDO, MILENA – ŻÓRAWSKI, WOJCIECH – BELKA, RADOSŁAW – GÓRAL, ANNA, Kielce, Poland: The Properties of the Materials Used in the Process of Plasma Spraying of Optical Coatings
MAZUR, MAGDALENA – ULEWICZ, ROBERT – SZATANIAK, PAWEŁ, Częstochowa, Poland: Fractographic Analysis of Research in the Field of High-Cycle Fatigue Regime
ORMAN, ŁUKASZ J. – KAPJOR, ANDREJ – HUŽVÁR, JOZEF, Kielce, Poland: Analysis of Boiling Heat Transfer on the Isothermal Surface Covered with a Single Copper Mesh
PLISZKA, IZABELA – RADEK, NORBERT – RADZISZEWSKI, LESZEK, Kielce, Poland: The Geometric Structure of the Electro-Spark Deposited WC-Cu Coatings Modified by Laser Treatment
SKARBEK-ŻABKIN, ANNA – SZCZEPANEK, MARCIN, Warszawa, Poland: Energy Parameters of Waste Generated while Vehicle Disassembly
STRĄK, EWELINA – PASTUSZKO, ROBERT – KŁOSOWIAK, ROBERT – URBANIAK, RAFAŁ, Kielce, Poland: FC-72 and NovecTM
649 Boiling on a Mini-Fin Surface Coated with Carbon Nanotubes
SZATANIAK, PAWEŁ – NOVÝ, FRANTIŠEK – ULEWICZ, ROBERT, Wieluń, Poland: Fatigue Properties and Application Options of the Fine-Grained Steel of DOMEX Type
WRÓBLEWSKI, EMIL – ISKRA, ANTONI – BABIAK, MACIEJ, Poznan, Poland: The Impact of Supplementing Motor Oil with Carbon Nanotubes on Improving the Tribological Piston – Cylinder System’s Performance
SUBSECTION 5A MECHANICAL ENGINEERING TECHNOLOGIES
Wednesday, June 24, 2015 9:00 – 12:00
Chairpersons: prof. Ing. Jozef Meško, PhD. Ing. Marek Brůna, PhD.
BANAK, RAFAL – ZOWCZAK, WLODZIMIERZ – MOŚCICKI, TOMASZ, Kielce, Poland: Theoretical Model of Laser Welding Process
DANIELEWSKI, HUBERT – SKRZYPCZYK, ANDRZEJ, Kielce, Poland: Impact of Bifocal Welding Head Angle Orientation on Welding Shape of TP347HFG High-temperature Steel DOPJERA, DANIEL – MIČIAN, MILOŠ, Žilina, Slovak Republic: The Ultrasonic Testing of Welded Joint According to Standard STN EN 12732+A1
FATURIK, MARTIN, Žilina, Slovak Republic: Ultrasonic Testing of Plastic Material
Republic: Influence of Time during Isothermal Quenching
KOWALCZYK, JAKUB – ULBRICH DARIUSZ – SAWCZUK WOJCIECH, Poznan, Poland: Testing of Welded Joints of Thin Metal Sheets Used in the Automotive Industry
KURP, PIOTR, Kielce, Poland: Compare of Sliding Tribilogical Properties for Laser Padded Coatings Deposited onto C45 Steel Substrate
LAZIĆ, VUKIĆ – ARSIĆ, DUŠAN – NIKOLIĆ, RUŽICA – ALEKSANDROVIĆ, SRBISLAV, Kragujevac, Serbia: Optimization of Welding of the Trucks Rear Axle Semi-housing
MELO, BORISLAV – MORAVEC, JÁN, Žilina, Slovak Republic: Impact on PVD Coating TiCN Increase the Opening Life of Active Parts of Cold-moulding Tools from Steel Vanadis 4 Extra
PATEK, MAREK – MIČIAN, MILOŠ – SLÁDEK, AUGUSTÍN, Žilina, Slovak Republic: Analysis of Weld Joints of the Split Sleeve for Branch Connections Repairs
PIOTR, THOMAS, Kielce, Poland: Influence of Relative Strain Values on Pressure Forces in Combined Extrusion of Parts Made of ENAW-1050A Alloy
PIOTR, THOMAS, Kielce, Poland: Determining the Values of Forces in Nut Hook Bending RICHTÁRECH, LUKÁŠ – BOLIBRUCHOVÁ, DANA, Žilina, Slovak Republic: Elimination of Iron Secondary Al-Si Alloy
SÁSIK, RÓBERT – MADAJ, RUDOLF – HOČ, MICHAL – SPIŠÁK, PETER, Žilina, Slovak Republic: Chemical Analysis of Produced Prototype by Selective Laser Melting (SLM) Method Using Rapid Prototyping Technology
VRZGULA, PETER – BUCHACO, MIROSLAV – MIČIAN, MILOŠ, Žilina, Slovak Republic: Alternative Uses of NDT-leak Testing Method of Pressure Changes in the Gas Industry
ZRAK, ANDREJ – MEŠKO, JOZEF, Žilina, Slovak Republic: Heat Transfer Analysis by Using Finite Element Method
ZMARZLY, PAWEL - GOGOLEWSKI, DAMIAN, Kielce, Poland: The Adaptation of Unconventional Manufacturing Technology in Casting
ŽIHALOVÁ, MÁRIA – BOLIBRUCHOVÁ, DANA, Žilina, Slovakia: Vanadium and Combined Vanadium and Chromium Influence to Mechanical Properties of AlSi10MgMn Alloy with Elevated Iron Level