System Suggestion

System Suggestion

System Suggestion

NX2 Race

The FDX, Fast Data eXchange, is the protocol that allows the PC to become a fully integrated NX2 instrument when connected to the NX2 Server.

The NX2 Race software free of charge with all NX2 FDX Servers, so bring your PC onboard and use all capabilities that the NX2 system can offer!

The NX2 Race software enables you to monitor all data in analogue or digital format, create waypoints and routes, logging all data, calibrate the transducers and system setup. You can also activate the NX2 Steer Pilot, set backlight levels on the instruments etc. In short - control the whole NX2 system.

The latest NX2 Race software can also be downloaded on the web for use with Silva NX2 FDX server based systems. The NX2 Race software will not work with NMEA0183 protocol.

Connect your PC direct to the NX2 FDX Server PC port that normally is operating in NMEA0183 mode. When the NX2 Race software is started, the Server will automatically switch over to FDX mode to be fully integrated with the NX2 system.

System Suggestion

FDX Server: Is the brain of the NX2 system. To the Server you will connect all transducers you want information from, instruments in which you want to see the information and all other non NX2 units, e.g. a PC, you want to have in the system. The Server must

be used together with the Multi Control and/or Remote Control.

Analog Wind Shows you the

wind angle. True or apparent NX2 General

Every unit/instrument with the name ”NX2” can be connected to the network. You can configure the system in pretty much which way you want with up to 32 NX2 units connected to

the network. The Server mustbe a part of the system.

Steer Pilot Shows you the difference from a

set reference angle. E.g. The compass course,

bearing to waypoint, course to

steer etc. Steer Pilot mustbe

controlled from the Multi Control and/or

the Remote Control. It can also be set from a push

button.

Speed Trim Presents speed

changes in per cent since last

trimming.

Compass Presents current

System Suggestion

Multi XL: Works basically as the Multi Control. The difference is that it has larger digits.

Multi XLmustbe controlled from the Multi Control and/or the remote control. Multi Control:

Is an instrument that is able to present all information (two lines of information at the same time) available in the NX2 network. This

instrument can also control all the information in the Server e.g. settings and calibrations. It also has the feature to be used as a remote control for other instruments.

Wind Data Digital wind display. Shows both TWA & AWA at the same

time. Can also present TWS, AWS, BSP among other things. TBS can be presented if a PC is connected to the server. GPS Navigator Shows current position, SOG, COG

and other satellite based information. Also has the ability to enter and edit waypoints, routes and sailplans in the

instrument.

Compass Data A digital compass display that shows

the boats current course both in

numbers and graphic. Has the ability to use BTW, CTS and wind as steer reference. Speed Presents BSP, distance, maximum BSP, average BSP

and timer with countdown function.

It can be a standalone instrument.

Star Sea Data Is a standalone instrument which

can present log, depth and distance

values.

Remote Control Works basically as a

Multi Control instruments. Can present all data in

the network and used for autopilot

steering.

CF Mast Bracket Fitting for Multi XL instruments on the

System Suggestion

NX2 AUTOPILOT.

NX2 Autopilot consists, for boats up to app. 45 feet, of 5 parts. For boats above app. 45 feet the integrated drive unit, HP40, will be split in to two parts; a separate ram and a separate pump. • Servo unit:

Connection box and brain for the autopilot system. • Integrated hydraulic drive unit:

The unit that affects the rudder to move when the autopilot is engaged. Will be mounted a tiller arm attached to the rudder stock or the quadrant. • Rudder angle transmitter:

Important to give the autopilot as accurate rudder information as possible.

• Compass transducer:

Gives the autopilot information about the actual course which will be compared to the set reference course. The compass

transducer shall be connected to the Servo unit.

If the autopilot system is integrated with the NX2 system i.e. with the Server, the compass transducer can be connected to either the Server or the Servo.

• Instrument that can control the autopilot:

From the instrument you will activate/deactivate the autopilot. This instrument can be:

- NX2 Autopilot instrument - NX2 Remote Control LOG TRANSDUCER DEPTH TRANSDUCER GPS ANTENNA NX2 TRANSDUCERS. WIND TRANSDUCERS. COMPASS TRANSDUCERS. S E R V O 52mm THF

Vid Navstation (PC tillbehör) Instrument placering

Grundutförande

Q: Product name: Part no. 1 Multi Control inkl. Server, 22118-21 Loggivare och Lodgivare 1 Vindgivare 22462 1 Vind Analog 22115-01 1 Multidisplay 22117-3

På skottet vid nedgångsluckan

Detaljerad specifikation

Multi Control

Grundutförande:

Med log, lod och vind

Analog vind Multi Control Navstation Navstation Navstation Navstation

Detaljerad Specification

Multi Control Nav station

Product name: Part no.:

VHF S15 28011

VHF S12 28001

Tillbehör

VHF S10 VHF S12

Multi Control Skott vid nedgångslucka

Grundutförande:

Med log, lod och vind

Analog vind

Q: Product name: Part no. 1 Multi Control inkl. Server, 22118-21 Loggivare och Lodgivare 1 Vindgivare 22462 1 Vind Analog 22115-01 1 Multidisplay 22117-3

Instrument placering

Multi Control

Navstation (PC Tillbehör)

Skottet vid nedgångsluckan Mast

3X Multi XL

Raceutförande:

Med log, lod, vind, kompass och GPS

Multi Control

GPS Navigator

Q: Product name: Part no. 1 Multi Control 22118-31 incl. Server 1 Log givare 20707 1 Lod givare 22409 1 Kompass givare 45º 21960 1 GPS Nav+Antenn 22118-6

1 Vind givare. Race 22511

Q: Product name: Part no.: 3 Multi XL 21680-1 1 Mastfäste Kolfibr. 69995-3 Detaljerad Specification Mast fäste Mast Multi XL

Multi Control GPS _Navigator Nav station

Multi XL Multi XL

Product name: Part no.:

Styr Pilot 22115-02 VHF S15 28011 VHF S12 28001 Tillbehör VHF S10 VHF S12

Raceutförande:

Med log, lod, vind, kompass och GPS

Steer Pilot Multi Control

Detaljerad specifikation Autopilot

Product name: Part no.: Fjärrkontroll 21210 Q: Product name: Part no.

1 Autopilot instrument 22117-7 1 Kompass givare 45º 21960 1 Servoenhet 21035-2 1 Linjär drivenhet 69991-12 1 Roderläges givare 21036-1 Tillbehör Autopilot instrument

Servoenhet _Server Kompass_givare

Linjär drivenhet

Fjärrkontroll

Autopilot