ENR System Administrator s Manual. For V Firmware 2013/01/30

A: Your organization’s security administrator will give you the domain number and the system will email the username and password to the user as they are setup with an account

Note: Clicking the Cancel button will undo the entered changes and display the currently saved information again... o r g EDIT

During Windows installation you will be prompted to create a username and password for the laptop’s administrator account (used to install programs and change system settings)..

username Required Username assigned to merchant account password Required Password for the specified username transactionid Required Original Payment Gateway transaction

To configure the Event Handling Schedule, on Live screen, click Setup  click “Schedule”, select the camera, and drag on the 24-hour time table.. Once a device is added to ENR

After the fisheye camera is successfully added, go to Setup page Cameras tab, select the device and then click “Get Camera Settings”, make sure you set the Stream Mode as

Double click the IP Camera Tool shot icon , select the Camera IP that you want to upgrade the firmware. Then select Upgrade Firmware and enter the username and password, choose

Double click the IP Camera Tool shot icon , select the Camera IP that you want to upgrade the firmware. Then select Upgrade Firmware and enter the username and password, choose