TCiCT. Cisco IP Phones (VoIP) Participant Guide

(1)

TCiCT

Cisco IP Phones (VoIP)

Participant Guide

Tulare County Information & Communications Technology TCiCT Training: Gregory Wong-x64803 & Randall Garringer-x64844

2014

Cisco IP Phones or VoIP takes using phones to a whole new level. VoIP has numerous features that are available, from call forwarding to corporate directories the VoIP phone gives you the tools to make using the County Phones system easier to use.

(2)

(3)

(4)

VoIP 101 - TABLE OF CONTENTS

Identify the VoIP Phone ... 6

Moving Phones ... 7

What is VoIP? ... 7

County VoIP Phones ... 8

1. BASIC FEATURES OF THE VOIP PHONE

... 9

1.1 Understanding the Buttons and Hardware ... 10

1.2 Understanding Line and Call Icons ... 11

1.3 Understanding LCD Screen Features ... 12

1.4 Changing the Settings on the VoIP Phones ... 13

1.4.1 Change LCD Contrast ... 13

1.4.2 Change Ringtones ... 13

1.5 Basic Features of the VoIP Phones ... 14

1.6 Placing Calls using the VoIP Phones ... 15

1.7 Answering Calls using the VoIP Phones ... 16

1.8 iDivert a Call ... 17

1.9 Ending Calls using the VoIP Phone ... 17

2. ADVANCED CALL HANDLING

... 18

2.1 Transferring Calls ... 18

2.2 Picking Up a Redirected Call ... 19

2.3 Storing and Retrieving Parked Calls ... 20

2.4 Placing a call on Hold and Resuming the call ... 21

2.5 Switching Between Multiple Calls ... 21

(5)

3. WORKING WITH VOICE MAIL

... 23

3.1 Accessing the Voicemail Box ... 24

3.2 Listening to Messages ... 24

3.3 Send a Message to another Mail Box ... 24

3.4 Review Old Messages ... 24

3.5 Changing Greetings ... 24

3.6 Re-Record Greetings ... 25

3.7 Turn on Alternate Greeting ... 25

3.8 Edit other Greetings ... 25

3.9 Change your Personal Settings ... 25

3.10 Change the PIN (Password) ... 25

3.11 Working with Voicemail ... 26

4. USING CALL LOGS AND DIRECTORIES

... 28

4.1 Using call logs ... 28

4.1.1 Viewing Calls in the Call Logs ... 29

4.1.2 Display Details for a specifi c single call record ... 29

4.1.3 Erase all calls records in all logs ... 29

4.1.4 Erase all call records in a single log ... 30

4.1.5 Erase a single call record ... 30

4.1.6 Dialing from a call log (While NOT on another call) ... 30

4.1.7 Dialing from a call log (While connected to another call) ... 30

4.2 Using the Personal Directory on the VoIP Phone ... 31

4.2.1 Accessing the Personal Address Book (PAB) ... 31

4.2.2 Search for a PAB entry ... 31

4.2.3 Dialing a PAB entry ... 32

4.2.4 Deleting a PAB entry ... 32

4.2.5 Editing a PAB entry ... 33

(6)

4.3 Working with Fast Dials ... 35

4.3.1 Assign a Fast Dial to a PAB entry ... 35

4.3.2 Assign a Fast Dial not using a PAB entry ... 36

4.3.3 Delete a Fast Dial... 37

4.3.4 Dialing a Fast Dial ... 38

4.3.5 Switching between Pages to fi nd Fast Dials ... 38

4.4 Using the Corporate Directory on the VoIP Phone ... 39

4.4.1 Dial from the Corporate Directory while NOT on a call ... 39

4.4.2 Dial from the Corporate Directory while ON another call ... 40

4.5 Working with Directories ... 41

5. MAKING CONFERENCE CALLS ON THE VOIP PHONE

... 42

5.1 Understanding the Types of Conference Calls ... 43

5.1.1 Standard Conference Calls ... 43

5.1.2 Meet-Me Conference Calls ... 43

5.2 Starting and Joining a Standard Conference Call ... 43

5.2.1 Creating a Conference Call by Calling Participates ... 43

5.2.2 Creating a Conference by Joining two or more Existing Calls ... 44

5.2.3 View a List of Conference Participants ... 44

5.2.4 Joining together existing calls that are on multiple phone lines ... 45

5.3 Using Meet-ME ... 46

5.3.1 Schedule a Meet-Me Conference ... 46

5.3.2 Starting a Meet-Me Conference ... 47

5.3.3 Converting Meet-Me Email to Meeting Invite ... 47

5.3.4 Sending Invites to a Meet-Me Conference ... 48

5.3.5 Joining a Meet-Me Conference (Internal Participants) ... 49

5.3.6 Joining a Meet-Me Conference (External Participants)... 49

(7)

VoIP 102 - TABLE OF CONTENTS

1. USING THE USER OPTIONS WEB PAGE

... 56

1.1 Accessing the Cisco Unifi ed CM User Options Web Page ... 56

1.2 Log into the CM User Options Website ... 60

1.3 Log Out of the CM User Options Website ... 60

2. CONTROLLING USER SETTINGS

... 61

2.1 Change the Browser Password ... 62

2.2 Changing your PIN ... 63

2.3 Change the Locale Language ... 63

3. DEVICE CONFIGURATION

... 64

3.1 Viewing Attached Phones ... 65

3.2 Device Confi guration Toolbar ... 66

3.3 Controlling Line Settings ... 67

3.3.1 Line Information ... 67

3.3.2 Log Missed Calls ... 68

3.3.3 Setup Call Forwarding Per Line ... 68

3.4 Speed Dial Confi guration ... 69

3.4.1 Creating Speed Dials ... 69

3.5 Abbreviated Dial Confi guration ... 70

3.5.1 Creating Abbreviated Dials... 70

(8)

4. WORKING WITH DIRECTORIES

... 72

4.1 The Corporate Directory ... 72

4.1.1 Searching the Corporate Directory... 72

4.2 Cisco WebDialer ... 74

4.2.1 Calling Corporate contacts using the WebDialer ... 74

4.3 Cisco Personal Directory ... 76

4.3.1 Searching the Personal Address Book... 76

4.3.2 Creating a New Contact in the Personal Address Book ... 78

4.3.3 Editing Contacts in the PAB ... 79

4.3.4 Deleting Contacts in the PAB ... 80

4.4 Working with Fast Dials ... 81

4.4.1 Creating Fast Dials ... 81

4.4.2 Editing Fast Dials ... 82

4.4.3 Deleting Fast Dials ... 83

4.5 Directories Lab ... 84

(9)

Identify the VoIP Phone

On the lines below, fi ll in all the features that you may know on the VoIP phone.

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 14. 15. 16. 13. 1 2 3 4 6 7 8 9 11 12 15 14 16 13 5 10

(10)

Moving Phones

The VoIP phones can be moved from cubical to cubical within the same department. Phones must stay behind if the move to a new building or department.

What is VoIP?

VoIP (Voice over Internet Protocol) is a combination of hardware and software that allows you to use the internet as a medium for making telephone calls. The Cisco Unifi ed IP Phones are full-featured phones, with speakerphone and handset designed for wide band audio. It is intended to meet the needs of transaction-type workers with signifi cant phone traffi c. It has two or more

programmable backlit line/feature buttons and four interactive soft keys that guide you through all call features and functions.

(11)

7936 Conference Phone

7937 Conference Phone

7921 Mobile Phone

County VoIP Phones

7941, 7942 (2 buttons)

7961,7962 (6 buttons)

(12)

1. BASIC FEATURES OF THE VOIP PHONE

This section contains the following topics.

• Section 1.1, “Understanding the Buttons and Hardware” (Page 10) • Section 1.2, “Understanding Line and Call Icons” (Page 11)

• Section 1.3, “Understanding LCD Screen Features” (Page 12) • Section 1.4, “Changing the Settings on the VoIP Phone” (Page 13) • Section 1.5, “Basic Features of the VoIP Phone” (Page 14)

• Section 1.6, “Placing Calls Using the VoIP Phone” (Page 15) • Section 1.7, “Answering Calls Using the VoIP Phone” (Page 16) • Section 1.8, “iDivert Calls” (Page 17)

(13)

Item Description

Programmable Buttons Depending on confi guration, programmable buttons provide access to:

• Phone lines and intercom lines (line buttons) and intercom lines

• Speed-dial numbers

• Web-based services (for example, a Personal Address Book button)

• Call features (for example, a Privacy, Hold, or Transfer button)

Buttons illuminate to indicate status:

Green, steady - Active call or two way intercom call Green, fl ashing - Call on hold

Amber, fl ashing - Incoming call or reverting call Red, steady - Remote line in use

Red, Flashing - Remote call on hold Phone Screen Shows phone features

Footstand Button Allows the angle of the phones base to be adjusted Messages Button Auto-dials your voice message box

Directories Button Opens / Closes the Directories menu. Use it to access call logs and directories

Help Button Activates the help menu

Settings Button Opens / Closes the Settings menu. Use it to control the LCD Screen and Ringtones.

Services Button Opens / Closes the Services menu.

Volume Button Controls the handset, headset and speakerphone volume (off-hook) and the ringer volume (on-(off-hook)

Speaker Button Toggles the speakerphone on or off. When the speakerphone is on, button is lit green.

Mute Button Toggles the microphone on or off. When the microphone is muted, the button is lit red.

Headset Button Toggles the headset on or off. When the headset is on, the button is lit green.

1.1 Understanding the Buttons and Hardware

(14)

1.2 Understanding Line and Call Icons

Icon

Line or Call State

Description

On-hook Line Not call activity on the line.

Off-hook Line You are dialing a number or an outgoing call is ringing Connected Call You are currently connected to the other party

Ringing call An Incoming call is ringing on one of the lines Call on hold A call has been placed on hold

Item

Description

Navigation Button

Allows you to scroll through menus and highlight items. When the phone is on-hook, displays phone numbers from the placed calls log

Keypad Allows you to dial phone numbers, enter letters and choose menu items

Softkeys Each activates a softkey option (displayed on the LCD Screen)

(15)

1

Primary phone line

Displays the phone number (directory number) for your primary phone line. When several feature tabs are open, the phone number and the time and date alternate display in this area.

2 Programmable button indicator

Programmable buttons can serve as phone line buttons, speed-dial buttons. Icons and labels indicate how these buttons are confi g-ured.

3 Softkey Labels Each displays a softkey function. To activate a softkey, press the softkey button

4 Status Line Displays audio mode icons, status information, and prompts.

5 Call activity area Displays current calls per line, including caller ID, call duration, and call state for the highlighted line (standard view).

6 Phone Tab Indicates call activity.

7 Feature Tabs Each indicates an open feature menu.

1.3 Understanding LCD Screen Features

This is what your main phone screen might look like with active calls and several feature menus open:

(16)

1.4 Changing the Settings on the VoIP Phones

1. Press the SETTINGS Button 2. Scroll to USER PREFERENCES

3. Hit the SELECT softkey 4. Scroll to Contrast

5. Press the UP or DOWN softkey 6. Press the SAVE softkey

7. Press the SETTINGS Button or EXIT softkey to exit.

1.4.2 Changing Ringtones

There are 24 ringtones to choose from, you need to review your departments policy for specifi cs on ringtones. To change your Ringtone follow these steps:

1.4.1 Changing the Contrast on the LCD

To change the contrast on the LCD screen follow these steps:

1. Follow steps 1-3 from Changing the Contrast on LCD 2. Scroll to Default Rings

3. Hit the SELECT softkey 4. Scroll to Desired Ringtone

5. Hit the Save softkey, to listen to the ringtone press the PLAY softkey 6. Press the SETTINGS Button or EXIT softkey to exit.

(17)

1 Adjust the angle of the phone Press the footstand button and move to desired angle

2 Volume bar

Adjusts the volume in the handset, speakerphone, and ringing

• To change the volume of the ringing press the volume bar left or right until the desired level is reached.

• To change the volume in he handset, pick up the handset and press the volume bar left or right, once the level is good press the SAVE softkey

• To change the speakerphone volume, press the speaker toggle, then press the volume bar left or right to desired level, then press the SAVE softkey. 3 Mute a call

Muting a call will allow you to talk to others while still on a call. To use the mute feature press the

MUTEtoggle while on a call. 4 Forwarding calls

To forward all calls, press the CFwdALL softkey then enter the phone number you wish to have calls forwarded too.

1.5 Basic Features of the VoIP Phones

3

1

2

4

(18)

Number To Make a call.... Then....

1 Using the handset Pick up the handset and enter the phone number 2 Using the New Call softkey Press the NEW CALL softkey and enter the phone

number

3 Using the Speed Dial or Line Press the Line button and enter the phone number 4 Using the Speakerphone Press the Speakerphone toggle and enter the phone

number

5 Using the Redial softkey Press the REDIAL softkey to dial last phone number. 6 Using the Corporate Directory Press the Directories Button, navigate to corporate

Directory, search for contact and hit dial softkey.

b T M k ll Th

1

2

3

4

5

6

Tips

• You can dial on-hook, without a dial tone (pre-dial). To pre-dial, enter a number, then go off-hook by lifting the handset or pressing dial or speaker toggle.

• When you pre-dial, your phone tries to anticipate the number you are dialing by displaying matching numbers (if available) from your Placed Calls log. This is called Auto Dial. To call a number displayed with Auto Dial, press the number, or scroll to it and go off-hook.

• If you make a mistake while dialing, press << softkey to erase digits.

• Dialing external phone numbers need to be entered as followed 9(559)636-4848, internal phone numbers only need be entered as followed 64848

(19)

1

2

3

5

4

Number To Answer a call.... Then....

1 Using the handset Pick up the handset. 2 Using the ANSWER softkey

Press the ANSWER softkey this will activate the speakerphone. You can pick the handset up after the call is connected.

3 Using the Line Button Press the Line button that is fl ashing to answer the call. 4 Using the Speakerphone Press the Speakerphone toggle to answer the call. The

fl ashing line button will automatically be connected. 5 Using a Headset Press the headset toggle the fl ashing line button will

automatically be connected.

(20)

1.8 iDivert

Calls

When your phone is ringing, you can choose to send the call immediately to Voicemail by pressing the iDivert softkey. This softkey can be pressed at any time while the call is ringing. Once the softkey is hit the line button will be grey and the message lamp will turn solid red if any messages are left.

1.9 Ending Calls using the VoIP Phones

Hang up the handset, here are some other ways to end calls. To End a call.... Then....

Using the EndCall softkey Press the EndCall softkey.

Using the Speakerphone Press the Speaker toggle to hang up the call. Using a wired Headset Press the Headset toggle to hang up the call

(21)

To Transfer a call... Then....

Without talking to the recipient

1. From an active call, press the TRANSFER softkey. 2. Enter the target number.

3. Press the TRANSFER softkey again to complete the transfer or hit the EndCall softkey to cancel.

Note: If the phone has on-hook transfer enabled, com-plete the transfer by hanging up.

And talk to a recipient before the call

1. From an active call, press the TRANSFER softkey. 2. Enter the target number.

3. Wait for the transfer recipient to answer.

Note: If the phone has on-hook transfer enabled, com-plete the transfer by hanging up.

Directly to recipients voicemail

1. From an active call, press the TRANSFER softkey. 2. Hit the Asterisk (*) key.

3. Enter the target number

2. ADVANCED CALL HANDLING

• Section 2.1, “Transferring Calls” (Page 18)

• Section 2.2, “Picking Up a Redirected Call” (Page 19) • Section 2.3, “Storing and Retrieving Parked Calls” (Page 20)

• Section 2.4, “Placing a Call on Hold and Resuming the Call” (Page 21) • Section 2.5, “Switching Between Multiple Calls” (Page 21)

2.1 Transferring

Calls

Transfer redirects a connected call. The target is the number to which you want to transfer the call.

(22)

2.2 Picking Up a Redirected Call on the VoIP Phones

Call PickUp allows you to answer a call that is ringing on a coworker’s phone by redirecting the call to your phone. You might use Call PickUp if you share call-handling with coworkers.

Tips:

• If multiple calls are available for pick up, your phone picks up the oldest call fi rst (the call that has been ringing for the longest time).

• If you press GPickUp or Group PickUp and enter a line number, your phone picks up the ringing call on that particular line (if available). • If you have multiple lines and want to pick up the call on a non-primary

line, fi rst press for the desired line, then press a Call PickUp softkey or button.

To Answer a call... Then.... That is ringing at another

extension within your call group

1. Press the PickUp softkey. (You might have to go off-hook to display the softkey.)

2. If the call rings, press the ANSWER softkey to connect to the call.

That is ringing at another extension outside your call group

1. Press the GPickUp softkey or the Group PickUp button. (You might have to go off-hook to display the softkey.)

2. Enter the group pickup number.

3. If the call rings, press the ANSWER softkey to connect to the call.

(23)

2.3 Storing and Retrieving Parked Calls

You can park a call when you want to store the call so that you or someone else can retrieve it from another phone in the Cisco Unifi ed Communications Manager system (for example, a phone at a coworker’s desk or in a conference room). You can park a call by using these methods:

• Call Park—Use the PARK softkey to store the call. Your phone displays the call park number where the system stored your call. You must record this number and then use the same number to retrieve the call.

• Directed Call Park—Use the TRANSFER softkey to direct the call to an available directed call park number that you dial or speed dial. To retrieve the call from a directed call park number, dial the park retrieval prefi x, then dial or speed dial the same directed call park number. You can use a Di-rected Call Park button to speed dial the diDi-rected call park number and to monitor whether a directed call park number is occupied or available.

TIps:

• The System Administrator has set the defaulted time to retrieve a parked call before it reverts to ringing at the original number to 1 minute. This feature can be adjusted to fi t need, to make a change you will need to contact the Service Desk and give them detailed information about the defaulted park time for the Call Park feature.

If you want to... Then....

Store an active call using the Call Park feature

1. During a call, Press the PARK softkey. (You may need to press the MORE softkey to see the PARK softkey.)

2. Note the Call Park Extension is displayed at the bottom of the LCD screen.

3. Hang Up the handset

Retrieve a parked call Enter the Call Park Extension from any Cisco VoIP Phone attached to the VoIP network.

(24)

2.4 Placing a call on Hold and Resuming the call

You can hold and resume calls. When you put a call on hold, the Hold icon appears on the right in the call information area and the corresponding line button fl ashes green.

To put a call on hold:

1. Make sure the call you want to put on hold is highlighted. 2. Press the HOLD Softkey

To Remove a call from hold:

1. Make sure that the appropriate call is highlighted. 2. Press the RESUME Softkey

To Remove a call from hold on a different line:

1. Press the appropriate line button: or (fl ashing). Doing so might cause the held call to resume automatically:

• If there is a reverting call on the line, the call will resume.

• If there is more than one reverting call on the line, the oldest call will resume

2. If necessary, scroll to the appropriate call and press the RESUME softkey.

2.5 Switching Between Multiple Calls

You can switch between multiple calls on one or more lines. If the call that you want to switch to is not automatically highlighted, use the Navigation button to scroll to it.

Switch between calls.... Then....

On one line

1. Make sure the call that you want to switch to is highlighted.

2. Press the RESUME softkey.

Any active call is placed on hold and the selected call is resumed

On different lines

Press the line button you want to switch to. If a single call is holding on the line, the call

automatically resumes. If multiple calls are holding, highlight the appropriate call and press the RESUME

softkey. Switch from a call to and

answer a ringing call

Press the ANSWER softkey, or if the call is ringing on a different line press the fl ashing line button. Any active call is placed on hold and the selected call is resumed.

(25)

2.6 Working with the VoIP Phones

Complete the following Exercises using the methods reviewed in the handout. 1. Set the ringtone to Jamacia.

2. Select a ringtone of your choice.

3. Adjust the contrast of the Phones LCD Screen. 4. Forward all calls to another extension.

Working together your neighbor(s). 1. Make a call to your neighbor.

a. Send a call directly to voicemail.

b. Park the call and have another person pick it up. i. Retrieve a parked call.

c. Transfer the call to another extension. 2. Pick up another extensions’ call.

(26)

3. WORKING WITH VOICEMAIL

• Section 3.1, “Accessing the VoiceMail Box” (Page 24) • Section 3.2, “Listening to Messages” (Page 24)

• Section 3.3, “Send a Message to another Mail Box” (Page 24) • Section 3.4, “Review Old Messages” (Page 24)

• Section 3.5, “Changing Greetings” (Page 24) • Section 3.6, “Re-Record Greetings” (Page 25) • Section 3.7, “Turn on Alternate Greetings” (Page 25) • Section 3.8, “Edit other Greetings” (Page 25)

• Section 3.9, “Change your Personal Settings” (Page 25) • Section 3.10, “Change the PIN (Password)” (Page 25) • Section 3.11, “Working with Voicemail” (Page 26)

(27)

While listening to the current message....

To repeat the current message Press 1

To save the current message Press 2

To delete the current message Press 3

To reply to the current message Press 4

To forward the current message Press 5

To mark the current message new Press 6

To skip back in the current message Press 7

To work with the messages properties Press 9

3.1 Accessing the Voicemail Box.

If you have any voice mail messages, your voice mail message waiting lamp indicator will glow red and your primary line appearance will indicate a fl ashing envelope icon. Most VoIP Phones have a mail box that can be accessed from the phone. The defaults to access your voice mail are as follows:

1. Press the Messages button 2. The default password is 159357 3. Press Pound (#) key

3.2 Listening to Messages

Once logged into your voice mail box you will hear your greeting followed by a prompt. Press 1 to listen to new messages, Press 3 to listen to old messages.

3.3 Send a Message to another Mail Box

You can send a voice mail to another persons box without even dialing their phone.

3.4 Review Old Messages

You have the ability to save your messages, if you want to review the saved mes-sages Press 3 then Press 1 to start hearing messages

3.5 Change your Greeting

You have six (6) greetings that can be used, and modifi ed. 1. Log in to your Voice mail box.

2. Press 2 to send a message. 3. Record the message.

4. Press the Pound (#) key. (Press ## to enter extension not names) 5. Type the Last Name then the First Name.

6. Press the Pound (#) key.

1. Log in to your Voice mail box.

2. Press 4 to access the setup options menu. 3. Press 1 to change a greeting.

(28)

3.6 Re-Record your Greeting

3.7 Turn on Alternate Greeting

3.8 Edit other Greetings

3.9 Change your Personal Settings

Personal settings is the place to go to adjust your recorded name and change the password to your voice mail.

3.10 Change the PIN (Password)

Note: To listen to voicemail from outside the offi ce dial 636-5499 enter your extension and the password you set for your voicemail box.

4. Press 2 to Turn on Alternate Greeting 1. Log in to your Voice mail box.

4. Press 1 to Re-Record the Greeting 5. Record the Greeting

6. Press the Pound (#) key

4. Press 3 to Edit other Greetings

• Press 1 to edit the Standard Greeting Press 4 to edit the Busy Greeting • Press 2 to edit the Closed Greeting Press 5 to edit the Internal Greeting • Press 3 to edit the Alternate Greeting Press 6 to edit the Holiday Greeting

2. Press 4 to access the setup options menu. 3. Press 3 to access the Personal Settings.

4. Press 1 to change the Voicemail Password (PIN). 5. Press 2 to Re-Record or change the recorded name.

2. Press 4 to access the setup options menu. 3. Press 3 to access the Personal Settings.

4. Press 1 to change the Voicemail Password (PIN). 5. Type the New Password (PIN).

6. Press the Pound (#) key. 7. Retype the Password (PIN). 8. Press the Pound (#) key.

(29)

3.11 Working with Voicemail

Complete the following Voicemail Exercises using the methods reviewed in the handout. 1. Login and listen to the messages.

2. Send the message “VoIP stands for Voice over Internet Protocol” to 64803. 3. Change the password to the extension of the your phone for the voicemail. 4. Listen to the greetings, change the standard greeting to say “Hello this is

extension XXXXX please leave a message Thank You.” (XXXXX - is the Training Phones extension you are using).

(30)

MEREPEAT

K C U T S K C U T S

WORD WORD WORD WORD

D

U

_C

K

FAREDCE

GIVE GET

Y Y GUY GUY

LEFT out FIELD

Book Book

Do

A CHANCE N

LU CKY

KJUSTK

G

W

E

D

I

N

12. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.

Each of the 12 items below is a separate puzzle.

How many can you fi gure out?

1

2

3

4

5

6

7

8

10

11

12

(31)

4. USING CALL LOGS AND DIRECTORIES

This section describes how you can use call logs and directories. To access both features, use the Directories button.

• Section 4.1, “Viewing calls in the Call Logs” (Page 28)

• Section 4.2, “Working with the Personal Address Book” (Page 30) • Section 4.3, “Working with the Fast Dials” (Page 34)

• Section 4.4, “Working with the Corporate Directory” (Page 38) • Section 4.5, “Directories Lab” (Page 40)

(32)

4.1 Using Call Logs

Your phone maintains call logs. Call logs contain records of your missed, placed, and received calls.

4.1.1 Viewing Calls in the Call Logs

1. Press the Directories Button.

2. Scroll to 1-Missed Calls, 2-Received Calls, 3- Placed Calls. 3. Press the SELECT softkey.

Each log stores up to 100 call records.

4.1.2 Display Details for a Single Call Record

Doing so displays information such as called number, calling number, time of day, and call duration (for placed and received calls only).

4. Scroll to specifi c Call Record. 5. Press the MORE softkey. 6. Press the DETAILS softkey. 7. Press the EXIT softkey to exit.

4.1.3 Erase all Call Records in ALL Logs

1. Press the Directories Button. 2. Press the CLEAR softkey.

(33)

4.1.4 Erase all Call Records in Single Call Log

2. Scroll to 1-Missed Calls, 2-Received Calls, 3- Placed Calls. 3. Press the MORE softkey.

4. Press the CLEAR softkey.

4.1.5 Erase a Single Call Record

2. Scroll to 1-Missed Calls, 2-Received Calls, 3- Placed Calls. 3. Press the MORE softkey.

4. Press the DELETE softkey.

4.1.6 Dial from a Call Log (While NOT on another call)

4. Scroll to the Call Record 5. Press the DIAL softkey.

4.1.7 Dial from a Call Log (While Connected to another call)

4. Scroll to the Call Record 5. Press the DIAL softkey.

6. Choose a menu item to handle the original call

• HOLD - Puts the fi rst call on hold and dials the selected call record. • TRANSFER - Transfers the fi rst call to another extension and drops

you from the call.

• CONFRN - Creates a conference call with all parties, including you. • ENDCALL - Disconnects the fi rst call and dials the second.

NOTE:

If you need to edit the displayed number, press EDITDIAL softkey followed by << or >> softkeys. To delete the number, press EDITDIAL softkey followed by DELETE softkey. (You may need to press the more softkey to display DELETE softkey.)

(34)

4.2 Working with the Personal Address Book

The Personal Directory is just that; personal to each individual VoIP phone, any employee with a VoIP phone will have access to a personal directory. Within this directory you can create, view, delete contacts, and fast dials.

4.2.1 Accessing the Personal Address Book (PAB)

1. Press the Directories Button.

2. Scroll to Personal Directory.

3. Enter the phones extension for the User ID. See Figure 1. 4. Enter the PIN. The defaulted PIN is 159357.

4.2.2 Search for a PAB entry

1. Press the Directories Button. 2. Scroll to Personal Directory.

3. Enter the Search Criteria. When entering the information for the contact, use the dial pad and press the corresponding number repeatedly until the desired letter is shown. When entering information that is incorrect users can use the << softkey to backspace one character.

4. Press the SUBMIT softkey.

5. Highlight the PAB listing that you want. 6. Press the SELECT softkey.

Figure 1: You will need to press the buttons repeatedly to go through letters to get the number.

(35)

4.2.3 Dialing a PAB entry

1. Press the Directories Button. 2. Scroll to Personal Directory. 3. Enter the Search Criteria. 4. Press the SUBMIT softkey.

5. Highlight the PAB listing that you want. 6. Press the SELECT softkey.

7. Scroll the phone number that you want to dial. 8. Press the DIAL softkey.

4.2.4 Deleting a PAB entry

1. Press the Directories Button. 2. Scroll to Personal Directory. 3. Enter the Search Criteria. 4. Press the SUBMIT softkey.

5. Highlight the PAB listing that needs to be deleted 6. Press the SELECT softkey.

7. Press the EDIT softkey. 8. Press the MORE softkey. 9. Press the DELETE softkey.

(36)

4.2.5 Editing a PAB entry

1. Press the Directories Button. 2. Scroll to 4-Personal Directory. 3. Search for a contact.

4. Highlight the Contact.

5. Press the SELECT softkey.

6. Press the EDIT softkey to edit the name and email address. 7. Press the UPDATE softkey.

8. Search for the contact. 9. Highlight the Contact. 10. Press the SELECT softkey. 11. Press the EDIT softkey.

12. If the phone numbers need to be updated. Press the PHONES softkey. 13. Change any numbers and press the UPDATE softkey.

Note: When editing a contact the << softkey is used to delete any information 14. Press the EXIT softkey once the phone has fi nished the modifi cation.

(37)

4.2.6 Adding a PAB entry

1. Press the Directories Button. 2. Scroll to Personal Directory. 3. Press the SELECT softkey. 4. Scroll to Personal Address Book 5. Press the SELECT softkey. 6. Press the SUBMIT softkey. 7. Press the MORE softkey. 8. Press the NEW softkey.

9. Using the Phones Keypad, enter the First, Last Name and give a Nickname. When entering the information for the contact, use the dial pad and press the corresponding number repeatedly until the desired letter is shown. When entering information that is incorrect users can use the << softkey to backspace one character.

10. Press the PHONES softkey.

11. Using the Phones Keypad, enter any phone numbers. 12. Press the SUBMIT softkey.

(38)

4.3 Working with Fast Dials

Allows users to assign index numbers (from 1 to 99) to phone numbers for quick dialing from your phone. Fast Dials allows you to assign codes to PAB entries for quick dialing. A fast dial is no more than a saved fi lter, creating personal fast dials for contacts will save you time in searching the personal address book for those contacts.

4.3.1 Assign a Fast Dial to a PAB entry

2. Scroll to Personal Directory. 3. Press the SELECT softkey 4. Scroll to Personal Address Book 5. Press the SELECT softkey.

6. Using the Phones Keypad enter information search fi elds. When entering the information for the contact, use the dial pad and press the corresponding number repeatedly until the desired letter is shown. When entering information that is incorrect users can use the << softkey to backspace one character.

7. Press the SUBMIT softkey 8. Scroll to the PAB entry 9. Press the SELECT softkey 10. Press the FASTDIAL softkey

11. Scroll to the phone number that you want to assign a Fast Dial 12. Press the SELECT softkey

13. Scroll to an UNASSIGNED Fast Dial. 14. Press the SELECT softkey

(39)

4.3.2 Assign a Fast Dial not using a PAB entry

2. Scroll to Personal Directory. 3. Press the SELECT softkey. 4. Scroll to Personal Fast Dials

5. Press the SELECT softkey. 6. Press the ASSIGN softkey. 7. Press the MORE softkey.

8. Scroll to an UNASSIGNED Fast Dial.

9. Using the Phones Keypad, enter any phone numbers. 10. Press the UPDATE softkey.

(40)

4.3.3 Delete a Fast Dial

1. Press the Directories Button. 2. Scroll to Personal Directory. 3. Press the SELECT softkey 4. Scroll to Personal Fast Dial 5. Press the SELECT softkey. 6. Press the MORE softkey 7. Press the REMOVE softkey

8. Scroll to the Fast Dial that you want to remove 9. Press the REMOVE softkey

10. Press the EXIT softkey

(41)

4.3.4 Dialing a Fast Dial

1. Press the Directories Button. 2. Scroll to Personal Directory. 3. Press the SELECT softkey 4. Scroll to Personal Fast Dial 5. Press the SELECT softkey.

6. Scroll to the Fast Dial that you want to call 7. Press the DIAL softkey

4.3.5 Switching between Pages to fi nd Fast Dials

2. Scroll to Personal Directory. 3. Press the SELECT softkey 4. Scroll to Personal Fast Dial 5. Press the SELECT softkey.

6. Press the NEXT softkey

(42)

4.4 Working with the Corporate Directory

The Corporate Directory enables you to connect to any VoIP phone within the Tulare County network.

4.4.1 Dial from the Corporate Directory while NOT on a call

1. Press the Directories Button

2. Scroll to 5-Corporate Directory

3. Press the SELECT softkey

4. Using the Phones Keypad enter the contacts First, Last or Number (extension). Only one of the fi elds needs to be entered. The more information you provide the more detailed the fi lter will be.

Enter the Search Criteria - When entering the information for the contact, use the dial pad and press the corresponding number repeatedly until the desired letter is shown. When entering information that is incorrect users can use the << softkey to backspace one character.

(43)

6. Scroll to the Corporate Contact 7. Press the DIAL softkey

4.4.2 Dial from the Corporate Directory while ON another call

1. Press the Directories Button

2. Scroll to 5-Corporate Directory 3. Press the SELECT softkey

4. Using the Phones Keypad enter the contacts First, Last or Number (extension). Only one of the fi elds needs to be entered. The more information you provide the more detailed the fi lter will be.

5. Press the SEARCH softkey 6. Scroll to the Corporate Contact 7. Press the DIAL softkey

8. Choose a menu item to handle the original call:

• HOLD - Puts the fi rst call on hold and dials the selected call record. • TRANSFER - Transfers the fi rst call to another extension and drops

you from the call.

• CONFRN - Creates a conference call with all parties, including you. • ENDCALL - Disconnects the fi rst call and dials the second.

(44)

4.5 Directories

Lab

Complete the following Directory Exercises using the methods in the handout. Exercise Scenario

An outside contact has called you and you need to remember the number. The contact is

Ervin Johnson 559-636-4848

1. Create an entry in the Personal Address Book for Ervin. 2. Create a fast dial for Ervin Johnson.

Part 2 of the Exercise

1. Pick 5 extension from the list, create those in the personal address book. 2. Call the contacts.

3. Review calls in the Missed, Received and Placed histories.

(45)

5. MAKING CONFERENCE CALLS

The VoIP Phones allow you to talk simultaneously with multiple parties in a conference call.

• Section 5.1, “Understanding the Types of Conference Calls” (Page 43) • Section 5.2, “Starting and Joining a Standard Conference Call” (Page 43) • Section 5.3, “Using Meet-Me” (Page 46)

(46)

5.1 Understanding the Types of Conference Calls

There are two types of conference calls: Standard (ad hoc) and Meet-Me.

You can create a conference in various ways, depending on your needs and the features that are available on your phone.

5.1.1 Standard Conference Calls

• CONFRN or Conference

Allows you to create a standard (ad hoc) conference by calling each participant. Use the Confrn softkey or the Conference button. Conference is available on most phones.

• JOIN

Allows you to create a standard (ad hoc) conference by combining existing calls. Use the Join softkey or button.

5.1.2 Meet-Me Conference Calls

Allows you to create or join a conference by calling a conference number. Use the MeetMe softkey or button.

5.2 Starting and Joining a Standard Conference Calls

5.2.1 Creating a Conference by calling participants

Conference allows you to call each participant. Conference is available on most phones.

1. Connect to a Call

2. Press the MORE softkey 3. Press the CONFRN softkey

4. Enter the participant’s phone number

5. Wait for call to connect (the Caller ID will display Conference Call after the calls have been connected.)

(47)

5.2.2 Creating a Conference by Joining two or more Existing Calls

Join allows you to combine two or more existing calls to create a conference in which you are a participant.

1. From an active call, highlight another call that you want to include in the conference.

2. Press the SELECT softkey

3. Once the call is selected the LCD screen will display this icon.

4. Repeat this step for each call that you want to add to the conference. 5. Press the MORE softkey

6. Press the MORE softkey 7. Press the JOIN softkey

5.2.3 View a List of Conference Participants

1. Highlight the Conference.

2. Press the CONFLIST softkey

NOTE: Participants are listed in the order in which they join the conference with the most recent additions at the top..

(48)

5.2.4 Joining together existing calls that are on multiple phone lines

1. From an Active call

2. Press the MORE softkey 3. Press the JOIN softkey

4. Press the green fl ashing line button for the call(s) that you want to join. One of the following occurs:

• The calls are joined.

• A window opens on the VoIP phone prompting you to select the calls you want to join. Highlight the call(s) and press the SELECT softkey, then press the JOIN softkey to complete the action.

Tips:

• If you frequently join more than two parties into a single conference, you might fi nd it useful to fi rst select the calls that you want to join, then press the JOIN softkey to complete the action.

• When Join completes, caller ID changes to “Conference.”

• You may be able to combine multiple conference calls by using the JOIN or DIRTRFR softkeys. Check with your system administrator to see whether this feature is available to you.

(49)

5.3 Starting or Joining a Meet-Me Conference Call

Meet-Me conferences allow you to start or join a conference by calling the conference number.

5.3.1 Schedule a Meet-Me Conference

1. Open GroupWise.

2. Click the New Appt Button. 3. Type TCMeet-Me in the To Field.

4. Assign date and time for appointment.

5. Give subject and brief description for appointment . 6. Press the Send Button.

See Page 11 in the GroupWise Workshop Materials

(50)

5.3.2 Start a Meet-Me Conference

1. Send Invites to all participants (see 5.3.3 Converting Meet-Me Email to Meeting Invite)

2. Press the NEW CALL softkey 3. Press the MORE softkey 4. Press the MEETME softkey

5. Enter the Phone number located in the Meet-Me email.

5.3.3 Converting Meet-ME Email to Meeting Invite

1. Send Invites to all participants (see 5.3.3 Converting email to Meeting Invite) 2. Press the NEW CALL softkey

3. Press the MORE softkey 4. Press the MEETME softkey

(51)

5.3.4 Sending Invites to a Meet-Me Conference

1. Open GroupWise.

2. Right Click on the Message from TCMeet-Me. 3. Choose Change To... from the menu.

4. Choose the Group Radio Button.

5. Press OK.

6. Enter Attendees in the To: Field.

(52)

5.3.5 Joining a Meet-Me Conference (Internal Participants)

1. Initiate a New Call using the VoIP Phone

2. Open the meeting invite and dial 636-4897 (64897 Only the 5 digit extension is necessary).

3. State your name, this will let others know your are attached to the conference call.

5.3.6 Joining a Meet-Me Conference (External Participants)

1. Initiate a New Call using any Phone

2. Open the meeting invite and dial 1-888-885-3222

3. State your name, this will let others know your are attached to the conference call.

Note: Participants hear a busy tone if they call the conference before the initiator has joined. In this case, participants must call back.

(53)

6. VOIP TERMINOLOGY

Call Forwarding

- A phone service feature that allows the customer to forward their calls to another phone number (for example, you can forward your offi ce phone calls to your cell phone if you know you are going to be away from home). This would be a typical feature included with your VoIP Phone Service.

Call Logging

- This enables the business phone system user to have complete analysis of outgoing and incoming calls. The call log shows the time & date, length, and phone number of all incoming and outgoing calls. In some cases call logging includes the capability to listen to, record and assess interactions between call centre agents and callers.

Call Pickup (PickUP)

- Allows users to answer a call ringing at another phone in your group. The phone picks up the longest alerting call in the group.

Immediate Divert (iDivert)

- Allows users to send a call directly to voice mail.

Internet Protocol

- Method or protocol by which data is sent from one

computer to another on the internet. Each computer on the internet has at least one IP address that uniquely identifi es it from all other computers on the internet.

IP Telephony (Internet Protocol Telephony)

- General term for the technologies that use the Internet Protocol’s packet-switched connections to exchange voice, fax, and other forms of information that have traditionally been carried over the dedicated circuit-switched connections of the public switched telephone network (PSTN). Also commonly referred to as IP Phone Service, VoIP Phone Service, and Broadband Phone Service

MAC Address

- Media Access Control. A standardized data link layer address that is required for every port or device that connects to a LAN. Other devices in the netowkr use thes addresses to locate specifi c ports in the network and to create and update routing tables and data structures. Also called a physical address. .

Telephony

- Taken from Greek root words meaning “far sound”, telephony means the process of converting or transmitting voice or other signals over a distance, and then re-converting them to an audible sound at the far end.

Voice over IP (VoIP)

- Term used in IP telephony for a set of facilities for managing the delivery of voice information using the Internet Protocol (IP).

(54)

VoIP 101 Review

1. If the Line button is a Green Steady light it indicates ____________? A. A missed call

B. An error

C. A transferred call D. An active call

2. The black bar on the top of the LCD screen displays ____________? A. Incoming call information

B. Time, date and your phone number C. The softkeys

D. Tulare County news

3. VoIP users can Forward all Calls directly to their Voicemail Box? A. True

B. False

4. Which of the following Icons will appear when you place a call on Hold? A.

B. C. D.

5. Pressing the PICKUP softkey allows users to _______________? A. Pick up an incoming call.

B. Does an automated redial on the phone.

C. Picks up a call from a group that you are part of. D. Picks up the previous call in a specifi ed group. 6. Which button must you press to access the Voicemail box?

A. B. C. D. .

(55)

7. If this Icon is fl ashing on the LCD Screen it means what? A. You have an email.

B. There is a Voice message waiting C. There is a new news Item.

D. You have a message from the Administrator. 8. The image below is demonstrating which feature?

A. EditDial Softkey B. Phone Number Entry C. Dialing softkey

D. Adding PAB Entry

9. The PAB is a centralized location on the VoIP phone where you can store Contacts?

A. True B. False

10. Fast Dials can be assigned to a contact or an entered number? A. True

(56)

11. This image shows an example of what?

A. Personal Address Book B. Dialing Contacts

C. Alphanumeric Keys D. Corporate Directory

12. Conference Calls can be setup by any Tulare County Employee? A. True

B. False

13. Outside attendees for a Meet-Me Conference Call will have to use a VoIP Phone?

A. True B. False

14. Which softkey will create an AD-HOC (on demand) Conference Call? A. Pickup

B. iDivert C. CFwdALL D. ConFRN

15. What’s the FIRST step in creating a Meet-Me Conference Call? A. Email Everyone

B. Reserve a Conference Room

C. Create an Appointment in GroupWise D. Call 85019 to start the meeting

16. Once you have scheduled the appointment in GroupWise, it will automatically email all the participants?

A. True B. False

(57)

(58)

1 MY TONGUE

IT

2

3

4

5

6

7

8

10

11

12

9 POWAUSTERS

T

O

U

C

H

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.

N

A

C

N

A

C

N

A

C

N

A

C

N

A

C

N

A

C

N

A

C

rosey

ALL/

WORLD

Each of the 12 items below is a separate puzzle.

How many can you fi gure out?

CAST

M

TOWN

N

A

IDEA

What Watt

SEARCH

AND

R e a d i n g

He’s / Himself

(59)

1. USING THE USER OPTIONS WEB PAGES

The fi rst time the site is visited from any browser users will need to accept the Security Certifi cate. Once the certifi cate is accepted users can access User Settings, Directory features, a Personal Address Book, and Fast Dials.

• Section 1.1, “Accessing the Cisco Unifi ed CM User Options Web Page” (Page 56) • Section 1.2, “Log into the CM User Options Website” (Page 60)

Section 1.3, “Log out of the CM User Options Website” (Page 60)

1.1 Accessing the Cisco Unifi ed CM User Options Web Page

1. Open Internet Explorer, Firefox or Chrome.

2. Type https://ts1/ccmuser/showHome.do in the address bar of the Browser.

3. Press the Enter key on the keyboard.

4. A security certifi cate request may appear on your screen.

5. To proceed using Internet Explorer CLICK the Continue to this website link.

(60)

6. To proceed using Chrome CLICK the Proceed anyway link.

(61)

8. Click the Add Exception button to open the Add Security Exception dialog.

(62)

10. After security certifi cate has been accepted the browser will point you to the site. The screen will look like below.

Tip:

A quick way to access the Cisco Unifi ed CM User Options Site is to navigate to TCWEB http://tcweb/tcphones/PhoneSystem.asp

(63)

1.2 Log into the CM User Option Website

1. In the upper right corner, under Username type your 5 digit extension 2. Under Password your password

• The default password is 159357

3. Press the Login Button

• After you hit the login button the webpage will look similar to the pre-login page. You will notice your extension in the upper right corner of the page.

1.3 Log out of the CM User Option Website

(64)

2. CONTROLLING USER SETTINGS

Your PIN and password allow you to access different features and services. For ex-ample, use your PIN to log in to Cisco Extension Mobility or Personal Directory on your phone. Use your password to log in to your User Options web pages and Cisco WebDi-aler on your personal computer. For more information, ask your system administrator. User settings include your password, PIN, and language (locale) settings.

• Section 2.1, “Change the Browser Password” (Page 62) • Section 2.2, “Changing your PIN” (Page 63)

(65)

2.1 Change the Browser Password

The Browser Password affects only the Cisco Unifi ed CM User Options Page. 1. Mouse over and select User Settings from the User Options drop down.

2. In the Browser Password Area, Enter the current password then the new password and fi nally confi rm the password.

3. Click the Save Button

(66)

2.2 Changing your PIN

Your PIN only will affect the Personal Address Book (PAB) on the VoIP phone. 1. Mouse over and select User Settings from the User Options drop down.

2. In the PIN Area, Enter the current password then the new password and fi nally confi rm the password.

3. Click the Save Button

4. The status fi eld will change from Ready to Update Successful.

2.3 Change the Locale Language

The phones have the option to display different languages if needed. If this is an option that you require please contact the Service Desk (64848).

(67)

3. DEVICE

CONFIGURATION

Now that your login to the CM site is complete, you must check to make sure your phone is connected to the CM site. This is called Device Confi guration, while there is no Confi guring available you will be able to see if your phone is attached.

• Section 3.1, “Viewing Attached Phones (Page 65) • Section 3.2, “Device Confi guration Toolbar” (Page 66) • Section 3.3, “Controlling Line Settings” (Page 67) • Section 3.4, “Speed Dial Confi guration” (Page 69) • Section 3.5, “Abbreviated Dial Confi guration” (Page 70) • Section 3.6, “Device Confi guration Lab” (Page 71)

(68)

3.1 Viewing Attached phones

1. Mouse over and select Device from the User Options drop down.

2. The Device Confi guration page will appear.

• Under the Name you should see a MAC Address - if you don’t see an address like the example below you will need to call the Service Desk to get the phone connected to the CM Site. If you have multiple devices connected to the site make sure to set the correct one.

• You will see the Model of your phone the example shows Cisco 7961

• You will see a description - this should say your department and name.

• You can download the Cisco User Guide for your specifi c phone by using the Link where it says User Guide.

(69)

3.2 Device

Confi guration Toolbar

On the Device Confi gurations page there will be a toolbar under the Device Confi guration text. There will be seven (7) buttons to choose from, it is always a good idea when changes are made to hit the save button then the apply confi g button.

1. Save - Saves only information in the Webpage - will not transfer that change to the phone, see Apply Confi g.

2. Reset - Will reset the CM User Options back to the default

3. Apply Confi g - Will transfer any saved changes to your VoIP phone. 4. Line Settings - Location of Call Forwarding feature, check box to log

missed calls, message lamp and indicator policy. Certain call forwarding features are not active (Forward only internal calls).

5. Speed Dials - Location of any speed dials (not available on two button phones), Abbreviated dials.

6. Phone Services - Administrator only 7. Services URL - Administrator only

Note:

• Its important to click the save button after every change and any feature that is being transferred to the phone

1 2

(70)

3.3 Controlling Line Settings

Line settings affect a specifi c phone line (directory number) on your phone. Line settings can include call-forwarding and voice message indicators.

3.3.1 Line Information

1. Verify the VoIP phone is linked to the site. 2. Press the Line Settings Button.

(71)

3.3.2 Log Missed Calls

To change whether or not your phone logs missed calls check the box located in the line information section.

3.3.2 Setup Call forwarding per line

1. Verify the VoIP phone is linked to the site. 2. Press the Line Settings Button.

3. Check or un-check the forwarding option needed.

4. Click the bubble under the option chosen.

5. Type the phone number or extension to forward calls. Make sure that if it’s an external number to dial 9+Area Code then the number. For internal calls just type the 5 digit extension. When entering numbers don’t use dashes or spaces.

6. Press the Save button.

7. Press the Device button to exit back to the Device Confi guration page.

(72)

3.4 Speed Dial Confi guration

There are two types of Speed Dials: Speed Dials and Abbreviated Speed Dials. Depending on confi guration, your phone can support several or no speed-dial but all models :

Speed-dial numbers - Only available on phones that are programmed to have a programmable second line.

Note: You can assign a number to an extension number (e.g., 64848) or to a 7-digit number (e.g., 6364848). For outside calls, add a “9” before the phone number (e.g., 95596364848). To eliminate the number from your settings, delete the information in this fi eld.

3.4.1 Creating speed dials

1. Mouse over and Select Device from the User Options drop down. 2. Press the Speed Dials Button.

3. Choose which Speed Dial (Only phones that have been programed for speed dials will have this option.).

4. Enter Number (Extension) in number fi eld - when entering number don’t use any dashes or spaces.

5. Give Speed Dial a Label - This is what will show up on the phone. 6. The ASCII fi eld will populate automatically

7. Press the Save Button.

(73)

3.5 Abbreviated

Dials

3.5.1 Creating abbreviated dials

1. Mouse over and select Device from the User Options drop down. 2. Press the Speed Dials Button.

3. Choose which Abbreviated Dial number

4. Enter Number (Extension) in number fi eld - When entering number don’t use any dashes or spaces.

5. Give Abbreviated Dial a Label - This is what will show up on the phone. 6. The ASCII fi eld will populate automatically

(74)

3.6 Device

Confi guration Lab

Line Settings

1. Forward all calls to extension 64803.

2. Change the Message Waiting Lamp Policy to be Light Only.

Speed Dials

1. Create a Speed Dial for extension 64803.

2. Create 8 Abbreviated Dials for extensions in the room or custom numbers. 3. Call the Speed Dial.

(75)

4. WORKING

WITH

DIRECTORIES

The Directory lists user information and phone numbers for Tulare County. On this page you can search for people and their phone numbers by Last Name, First Name, User ID, EXT(extension), and fi nally LDAP EXT(extension) depending on which variable you know. Once you typed your variable in the provided box you just click the fi nd button to retrieve your results.

• Section 4.1, “Searching the Corporate Directory” (Page 72) • Section 4.2, “Cisco WebDialer” (Page 74)

• Section 4.3, “Cisco Personal Directory” (Page 76) • Section 4.4, “Working with Fast Dials” (Page 81) • Section 4.5, “Directories Lab” (Page 84)

4.1 The Corporate Directory

4.1.1 Searching the Corporate Directory

(76)

2. The Find and List Directory Entries page will appear. This page is where you will search for an employee by using the criteria you pick.

3. Choose a criteria from the fi rst drop down - Last Name, First Name, and LDAP extension.

4. Choose a criteria from the second drop down - begins with, contains, ends with, is exactly, is empty, and is not empty

5. Type text to search for in third fi eld.

(77)

4.2 Cisco

WebDialer

The Cisco WebDialer allows you to make calls on your Cisco Unifi ed IP Phone to directory contacts by clicking on items in a web browser. Your system

administrator must confi gure this feature for you.

4.2.1 Calling Corporate contacts using the WebDialer

1. Complete the searching process - See 4.1.1 - Searching the Corporate Directory

2. Click on the extension for the contact you want to contact.

(78)

4. Verify the Calling device is correct.

5. Press the dial button to make a call - Pressing the dial button will activate the Hang up dialog.

(79)

4.3 Cisco Personal Address Book

The personal address book is a list of contacts that you wish to save. The address book is directly linked to your Cisco Phone, and can be updated using either the phone or the Cisco Unifi ed Communication Manger. The real advantage to using the website is that you can create or edit them faster than you could on the phone.

4.3.1 Searching the Personal Address Book:

1. Mouse over and select Personal Address Book from the User Options drop down.

2. Select an option from the fi rst drop down - Nick Name, First Name, or Last Name.

(80)

3. Select an option from the second drop down - begins with, contains, ends with, is exactly, is empty, and is not empty.

4. Type text to search for in third fi eld.

(81)

4.3.2 Creating a new contact in the Personal Address Book:

You can add contacts to your personal address book through the website faster than you could using the phone. You will need to know the name of the contact, phone number and email.

1. Complete the searching process - See 4.3.1 - Searching the Personal Address Book.

2. Press the Add New Button to open the Personal Address Book Confi guration page.

3. Type the First Name for the contact. 4. Type the Last Name for the contact.

5. You are required to give the contact a Nick Name. 6. Type the email address for the contact.

7. Type any phone numbers for the contact.

8. Press the Save Button. When saved the status fi eld will read Add Successful.

TIP:

• To create multiple contacts fi nish entering all the information for the fi rst contact click the save button, then click the Add New button an repeat the steps from above.

• You can set up a speed-dial button for each programmable button on your phone that is not reserved as line button. Alternately, use Abbreviated Dial or Fast Dial.

(82)

4.3.3 Editing contacts in the PAB:

2. Click on the name under the Nick Name column (names are blue and underlined). This takes you to the Personal Address Book Confi guration page

3. Type the First Name for the contact. 4. Type the Last Name for the contact.

5. You are required to give the contact a Nick Name. 6. Type the email address for the contact.

7. Type any phone numbers for the contact.

8. Press the Save Button. When saved the status fi eld will read Update Successful.

(83)

4.3.4 Deleting contacts in the PAB:

2. Click the box next to the name(s) you wish to delete from your PAB.

3. Press the Delete Selected button.

4. A message from the webpage will appear. Click OK if you wish to follow through with the deletion of the contact(s).

(84)

4.4 Working with Fast Dials

Fast Dials are available on all phones and act like speed dials.

4.4.1 Creating Fast Dials

1. Mouse over and select Personal Address Book from the User Options drop down.

2. Click the Add New Button - This will take you to the Fast Dials Phone Book Confi guration page.

3. Enter a Fast Dial number in the Fast Dial fi eld

4. Enter the Number (Extension) in Phone number fi eld.

6. Mouse over and select Device from the User Options drop down. 7. Press Apply Confi g to Transfer changes to your phone.