2Wire Gateway Installation Guide. For 2701HGV-W

PHONE Port: For your Internet phone line, this port allows you to connect your telephone or fax machine to the Phone Adapter using an RJ-11 telephone cable.. ETHERNET Port:

calling your cable provider.
Telephone service is not activated. If the rightmost light on the Wireless Voice Gateway stays on while others flash, check with your TSP or

Connect one end of the provided RJ-11 telephone cable to the wall phone jack of a telephone line, and the other end to the L1 jack on the back of the FortiVoice unit.. If

Just plug the Phone Adapter into your network router or gateway, then connect your phones or fax machines to the Phone Adapter to receive telephone service through your cable or

3 Use the long phone cable provided and connect the port labeled wall on the ooma Hub to the phone jack in the wall (not your DSL jack)..

3 Use the long phone cable provided and connect the port labeled wall on the ooma Hub to the phone jack in the wall (not your DSL jack)..

Connect the provided gray telephone cable from the gateway’s PHONE LINE port to a telephone jack with DSL service.... Connect the First Computer to

Plug one end of the telephone cable into the empty port on the telephone jack splitter and the other end into the grey phone port on the back of the wireless gateway.. Important: