• No results found

Induction Heating in the Processing of Ti & Zr

N/A
N/A
Protected

Academic year: 2020

Share "Induction Heating in the Processing of Ti & Zr"

Copied!
10
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1. Typical distribution of temperature field during induction heating.
Figure 3. Lowest temperature difference εinf (maximum achievable uneven temperature field) vs
Figure 5 shows the distribution of final temperature field of zirconium billet with a diameter 220 mm and a field means
Figure 7. Scheme of thermocouples’ installation along the billet’s length in diameter of 100 mm
+2

References

Related documents

A total 16670 citations were recorded in 4325 publication from the marked period of study in which the maximum citations were recorded in the year 2010, and the highest research

FOUR YEAR ADDITIONAL COMPRESSOR WARRANTY: Glastender will warrant to the original user the compressor for all self- contained refrigeration models for an additional four

The result established that processing techniques, such as, germination and fermentation, improved on the mineral, amino acid and fatty acid composition; and also, eliminate

Team Up For Healthy Living is a federally grant funded project that was developed at East Tennessee State University (ETSU) by a local team of researchers. Through funding from the

Heintz’s argu- ments for nonetheless inferring the latter type of exemption—(1) that many of the Act’s requirements, if applied directly to litigation activities, will create

The study was conducted using the survey model because its aim was to determine the TPACK of pre-service teachers in the departments of primary school elementary school teaching

Note: The CP MG card functions as the Co-resident Call Server and Signaling Server, and the Gateway Controller while occupying Slot 0 in a Media Gateway..

In my constructivist sociopolitical approach, aligned with a modelling of emphasized femininity as performative, I pinpoint the greater leadership potential of women