• No results found

Design a 3.5 Antenna for Dual Band Application

N/A
N/A
Protected

Academic year: 2020

Share "Design a 3.5 Antenna for Dual Band Application"

Copied!
7
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 2. Antenna Geometry (a) Structure 5 (b) Structure 3
Figure 4. Design A2 (a) Front view (b) Back view
Figure 6. Design C1 (a) Front view (b) Back view
Figure 11.
+2

References

Related documents

Local centrality measure is likely to be more effective to identify influential nodes than degree centrality measure as it utilizes more information, while it has much

In summary, the major finding of the study is that there is a nexus between competitive intensity and product innovation, and the nexus is affected by other antecedent variables in

This project deals with intelligent battery charging technique using SOC(State Of Charge) estimation so as to enhance the effective power utilization of solar

In this dissertation, we have present the application of the I-BACCI process that reduces the regression test suite using the firewall analysis RTS method based upon

[6]In this approach offer attention to Associate in nursing administration drawback IEEE 802.11 Wireless LANs suffers by. IEEE 802.11featured with permanent keys

These data support the hy- pothesis that the gypsy insertion in the cut locus triggers the production of novel small RNAs directed against the sense sequence of the

and Duval, R., “Influence of Silica Fume on the Workability and Compressive Strength of High Performance Concrete” Cement and Concrete Research Vol. and Lanctot, M.C.,

T HE indirect fl ight muscles (IFMs) of Drosophila serve as a good genetic model system to study muscle develop- ment, assembly of structural proteins, and regulation of