• No results found

A Novel Bow Tie Antenna with Triple Band Notched Characteristics for UWB Applications

N/A
N/A
Protected

Academic year: 2020

Share "A Novel Bow Tie Antenna with Triple Band Notched Characteristics for UWB Applications"

Copied!
12
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1(a) & Figure 1(b).
Figure 2. Geometry of CSRRs, (a): configuration for CSRR1 to notch 8.1 GHz band; (b): configuration for CSRR2 to notch 5.6 GHz band; (c): configuration for CSRR3 to notch 4.32 GHz band
Figure 3. Simulated VWSR of antenna without CSRRs.
Figure 5. Simulated VWSR of the UWB bow-tie antenna with CSRR1: effect of CSRR size (width)
+4

References

Related documents

At the receiving nodes, flits are checked for errors, corrected and then encoded in the receiving FIFO.The proposed architecture protects the packets from the

put 1 before the converted binary form and the rest of the binary value stored in the form (Block size +2) bits .If the decimal number is +ve then put 0 before the converted

things and artifacts to posit that artifacts have internal teleology just as living

advancements like integration of distributed generation to the network system and advancement in converter based loads have given rise to several disturbances that

The transmission network expansion planning problem consists of two mutually related tasks, namely, the investment and operation sub-problems [1].Transmission

It is however certain that the increase in foot abnormalities is in no way com- parable to the results which would have been obtained did the incidence of foot abnormalities

This technique has been featly implemented a broad array of engineering and mathematical optimization problems (Boussaid et al. 2015).In this study, the BBO based

An electromagnetic relay circuit (with proper current amplification at the input) will switch off the corresponding load after the counter output goes to zero.. The block diagram