• No results found

OPTIMIZATION OF HIGH VOLTAGE POWER SUPPLY FOR INDUSTRIAL MICROWAVE GENERATORS FOR ONE MAGNETRON

N/A
N/A
Protected

Academic year: 2020

Share "OPTIMIZATION OF HIGH VOLTAGE POWER SUPPLY FOR INDUSTRIAL MICROWAVE GENERATORS FOR ONE MAGNETRON"

Copied!
8
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 3).  As flux in the machine is provided by magnets, there is no need to supply excitation current to the stator winding
TABLE I. PMSM TEST MOTOR
Fig 6. Real-Time Control Prototyping
Fig 9. Comparison Of Speed Responses Obtained By Different Cable Length During Step Down 20% Reduction From Speed Command

References

Related documents

We synthesized a new series of derivatives with a head-to-head bis-benzothiazole strture and these compounds showed significant anticancer activity comparied with

variation in grain size with reducing the initial FeTi layer thickness on nitriding, but there was no degree of ordering as was present in the pre-exposed FeTi

The folin-ciocalteu method is the only method that is used for quantification of total tannins; other methods like butanol-HCl method and vanillian-HCl method in methanol are used

Keywords : Temperature profiles, acoustic propagation, sound speed profile, acoustic inter-

was observed, that when carbendazim, an effective fungicide used for suppressing the growth of phyto- pathogenic fungi was compared with the extracts of different

The new results reported here support the hypothesis that the cost of converging upon an accurate hypothesis is signicantly reduced if trials are selected by ASE-Progol rather than

Five 2,10-disubstituted phenoxazines (10-3'-N-bis(hydroxyethyl)amino]propyl]phenoxazine BPP; 10-3'-N- bis(hydroxyethyl)amino]propyl]-2-chlorophenoxazine BPCP;

In this study, were conducted thirteen phytochemicals tests, which have been identified in species only five secondary metabolites, which are: alkaloids, depsides