• No results found

A Simulation Analysis of Latency and Packet Loss on Virtual Private Network through Multi Virtual Routing and Forwarding

N/A
N/A
Protected

Academic year: 2020

Share "A Simulation Analysis of Latency and Packet Loss on Virtual Private Network through Multi Virtual Routing and Forwarding"

Copied!
7
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig 4 : MPLS Labels
Fig 5: The Network View of customer
Fig 7: Illustration of VRF on the PE router
Fig 9: The Process of IP Packets Across the MPLS VPN
+3

References

Related documents

The following topics will be discussed: MPLS VPN privacy, distributed network-based and endpoint security, traffic management, and routing architecture design.. MPLS VPN

Handleiding een Virtual Private Network (VPN) verbinding opzetten Versie 1.3 – 18-11-2009.. 1 Setting up a Virtual Private Network (VPN) connection

 If you are using VPN with your Windows computer and have difficulty accessing certain applications, or are being prompted to provide a password for applications you don’t

Part III Ethernet VPN Services... Chapter 9 IP/MPLS VPN Service Routing Architecture. 9.1 IP/MPLS VPN Service Network Infrastructure. 9.2 Alcatel-Lucent Service Routing

In this task, you need to create a tunnel between a computer and a gateway, allowing the computer to access the private network that is connected to the gateway.. To demonstrate

The managed device transmits this message through the virtual private network (VPN) tunnel. Based on the local routing table, MDM Gateway Server forwards the message to the

The VRF-Aware DNS feature enables the configuration of a Virtual Private Network (VPN) routing and forwarding instance (VRF) table so that the domain name system (DNS) can

This sample configuration shows how to set up a Multiprotocol Label Switching (MPLS) network for further tasks such as Virtual Private Network (VPN) or traffic engineering (see