• No results found

When is it optimal for the event triggered strategy in energy harvesting transmission

N/A
N/A
Protected

Academic year: 2020

Share "When is it optimal for the event triggered strategy in energy harvesting transmission"

Copied!
13
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1 System model, where the car is a moving agent and the sensor harvests energy and transmits information to the moving agent
Fig. 22L Event-triggered strategy framework. The transmission will be triggered when the battery is charged at least� 0v0Pfill(t)dt as well as themoving agent arrives at the boundary of the effective range
Fig. 3 Energy consuming curve when the initial energy in the battery is a constant
Fig. 4 Energy consuming curve when the energy-harvesting power is a constant
+4

References

Related documents

centre. The complaint letter included similar complaints regarding oppression. In this case, we see that the issue was taken to the court of Gemerek under the observance of an

Furthermore, although the majority of leadership, work and activism within the area of ‘domestic violence’ is carried out by women, and despite the relative smallness of

Importantly, though, it is not necessarily the case that sorting at the cuto¤ that the monopolist chooses after the increase in inequality yields higher welfare than before As

The containers made of Stainless Steel, PTFE, Perspex or glass, can be easily replaced to test the surface effect on tribo-electrification of pharmaceutical powders.. The

I apply autoimmunity in the context of hospitality in order to challenge the tendency towards an immunity of shutting down borders, stricter acceptance policies, economic

1) Minimize the learning time required to master core mechanics’ features. 2) Minimize the number of core mechanics, and the amount of features for each one of them. 3) Make sure

The case of Daniel would only have been justied if there was enough space in detention to detain all asylum seekers and refugees, or if he merely faced no work visa, and his return

Virtual reality or CNC simulation software can be constructed by using VRML tools with limited functionality or with full functionality using 3D CAD software or