• No results found

Design and Implementation of Mesh based Multimedia Transmission System at 400MHz

N/A
N/A
Protected

Academic year: 2020

Share "Design and Implementation of Mesh based Multimedia Transmission System at 400MHz"

Copied!
5
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 2. The schematic diagram of a common Mesh node.  Figure 3. The schematic diagram of a central Mesh node
Table 1. Channel, channel bandwidth and occupancy frequency.
Figure 6. The transmission effect diagram of the video after successful networking.

References

Related documents

Since 2011, special educational support in Finland has been provided to pupils in primary schools (aged 6–12 years) and lower secondary schools (aged 13–16

STOXX Europe Large 200 Index Futures FLCP Equity Index STOXX Europe Small 200 Index Futures FSCP Equity Index DJ Global Titans 50 Index Futures FT50 Equity Index

This study attempted to optimize the most significant design parameter of pedal operated paddy thresher (POPT) such as loop spacing, tip height, drum peripheral speed and number

Figure 5.13: Normalized x values, 40 cycles into the lightning strike occurrence, for the case study cluster over a 60 cycle window size. This is done to ensure no oscillations

Or you can deploy a farm module with network load balancing and failover on several Windows, Linux or AIX servers. Then make a first test to understand correctly the SafeKit

The projected gains over the years 2000 to 2040 in life and active life expectancies, and expected years of dependency at age 65for males and females, for alternatives I, II, and

Subject Matter Expert – Oracle OAAM and IDM Setup Design and Implementation (Each Master Contractor can only submit three candidate for the RFR).. Anticipated start date June