-2-Contents Page Contents 2 LocktransP TLK-02 3 Characteristics 4 Examples of applications 4 Ordering information 4 1. Functional diagram 4 2. Description 5 Operation “ Protection “
3. Typical system configuration 6
4. LocktransP SK01/12 and SK01/24 specifications 7
General “ Electrical specifications “ Dimensions “ 5. Transponder reader 8 General “ Dimensions “
Required installation space “
6. Photographs of the LocktransP TLK-02 9
-3-LocktransP TLK-02
Over the last few years, cargo theft has been a subject of considerable discussion in the transport sector. Various insurers, interest groups and lawyers have considered the problem of cargo theft.
Cargo theft has led to considerable losses for some companies, and in certain cases has even resulted in bankruptcy. Prevention has become an absolute necessity. Alongside preventive measures which can be taken internally, such as screening personnel, it is now also possible to soundly protect your equipment against theft.
Specifically in response to the demand for a sound cargo bay protection system, Sterk technisch adviesbureau BV has developed the LocktransP TLK-02 system, for distribution companies and package delivery services. The LocktransP is transponder-operated. Transponder operation works on the basis of the principle that only the person with the correct transponder can gain access to the cargo. The LocktransP makes it possible to switch the cargo bay security system on and off, centrally. By activating a pin lock on the door and/or an interrupter on the tailboard, unauthorised persons are kept out of the cargo bay, and hence away from the cargo. It is also possible to use detection for example in the form of magnetic contacts. If the door is broken open, whilst the LocktransP is switched on, an audio signal or a visual signal (depending on the type of alarm system selected) can be triggered.
The biggest advantages are the high degree of user-friendliness and the broad suitability for application of the LocktransP TLK-02. Since the system can practically be assembled and installed tailor-made, the user himself can decide on the system composition.
A further possibility includes a so-called “key plan”. This means that for each vehicle secured with the LocktransP TLK-02 system, it is possible to program which individuals are authorised to gain access to the cargo bay.
-4-Characteristics
• User friendly
• Up to 10 different keys programmable • Automatic activation after preset time
• Activation time variable from 8 to 40 seconds (adjustable as required) • Low power consumption
• Broad application
• Minimal assembly space required
• Thanks to broad application, practically “tailor made” system
Examples of applications
• Tailgate interrupter
• Activation of pin lock for loading door locking • Access control to cargo bay
• ……
Ordering information
Component no. Description
02-6500 LocktransP SK01/12 Control.set 02-650 LocktransP SK01/24 Control.set The types SK01/12 and SK01/24 specified in the description refer to the 12 and 24 volt versions of the LocktransP TLK-02.
1. Functional diagram
LocktransP Central unit Transponder reader
Signal (e.g. LED, buzzer, siren)
Application (e.g. tailgate)
Detection (e.g. magnetic contact)
-5-2. Description
The LocktransP has been specially developed for securing cargo bays. The system is responsible for activating the various facilities which ensure the protection of the cargo. The LocktransP, in other words, makes it possible to switch the protection facilities in the cargo bay on and off from a central unit.
Operation
The LocktransP is transponder-operated. This means that the system can only be switched on and off using the correct transponder key. The transponder key is presented to a receiver (the reader). The code contained in the transponder is verified according to the codes in the LocktransP database. This verification takes less than half a second. If the LocktransP recognises the presented transponder, the protection system is switched off. Transponder operation offers a number of major advantages. Firstly, the transponder reader can be installed practically anywhere, allowing the user to determine the installation position. Another advantage is the possibility of establishing a so-called key plan. Where a key plan is established, it is possible to decide for each vehicle individually to which persons authorisation to open the vehicle will be granted. The solid transponder comes in the form of a key ring, and can as a result be stored in any (secure) location. In other words, transponder operation is user friendly, fast, handy and effective.
Protection
Using the LocktransP, your cargo can be protected in one of two ways, namely by passive or active protection. Active protection of the cargo is achieved by interrupter and lock. The interrupter can for example be installed on the loading lift, thus preventing pallets and other large items easily being removed from the vehicle. The LocktransP can lock the cargo bay by for example activating a pin lock or magnetic lock.
Alongside the active operation of the various protection systems such as locks and interrupter relays, the LocktransP also offers possibilities for passive security systems. Passive security is achieved by having the LocktransP detect a range of circuits, and responding accordingly. For example, if the door is opened, the circuit for the magnetic contacts will be broken. If at that time the LocktransP is not deactivated, this will be viewed as an attempted break-in, and the various alarms will be activated (such as: buzzer or siren – depending on the type of alarm system chosen). A direct alarm, for example via the warning lights, siren, horn, etc. is not the only option. The LocktransP also offers the option of interrupting the starter motor, for example if one of the detection circuits is broken. By interrupting the starter motor, the driver is prevented from driving away in a vehicle which is not locked and/or in which the loading bay is not correctly closed. As a consequence, the risk of cargo theft at traffic lights or in busy urban traffic is considerably reduced.
In brief, the key characteristics of the LocktransP system are user friendliness, very broad application and system composition, which can practically be tailor-made to every user’s requirements.
-6-3. Typical system configuration: Pin lock operation and detection via magnetic contact
1. LocktransP SK 01/24 Central unit 5. Relay base
2. Transponder reader 6. Pin lock
3. Magnetic contact 4. Fuse holder
-7-4. LocktransP SK 01/12 and SK 01/24 specifications
General
Material housing
Height ABS 32 mm
Weight LocktransP central unit type SK 01 65 gram
Attachment points 2
Electrical specifications
Type SK Type SK
01/12 01/24 Unit
Nominal voltage 12 24 Volts
Minimum voltage 9 19 Volts
Maximum voltage 16 32 Volts Max. current relay
contacts 8 8 Ampere
Power consumption
standby 15 10 milli Ampere
Power consumption
activated 100 55 milli Ampere
-8-5. Transponder reader
Transponder reader with integrated LED
General
Material housing Polyurethane Entirely cast in Polyurethane moulded resin Indication via Integrated LED
Dimensions
* For assembly in rear section of cargo bay
Photographs of the LocktransP TLK-02
Transponder reader (here positioned alongside tailgate operating unit)
6.
Central unit
LocktransP TLK-02
Pin lock and detection with magnetic
All rights reserved. Nothing from this edition may be reproduced and/or published by means of print, photocopy, microfilm or any other means, without prior written permission from Sterk Technisch Adviesbureau B.V. This also applies to the enclosed drawings and diagrams. Sterk Technisch Adviesbureau B.V. reserves the right to modify parts at any moment, without giving prior or direct notice to the client. The content of this document may also be changed without advance warning. This document is valid for the standard model of the product. Therefore, Sterk Technisch Adviesbureau B.V. cannot be held responsible for possible damage resulting from different
specifications of the delivered product. For information on adjustments, maintenance tasks or repairs not described in this document, we ask you to contact the Technical Service Department of Sterk Technisch Adviesbureau B.V. Although this document has been put together with all possible care, Sterk Technisch Adviesbureau B.V. cannot accept responsibility for possible errors in this document or their consequences.