ASSIGNMENT
OF
SIMULATION AND MODELLING
Submitted to:
Mr. Mandeep Singh
Submitted by:
Shah Imran
Roll no. : RE3703A21
Q1. Delineate various factors which we will consider for system environment. Justify by giving suitable examples.
Ans: Need to pay attention to human factors in the workplace and work
environment and brought greater indirect attention to ergonomics by including a Work Environment clause that points out the importance of human factors on the quality of work produced.
The main factor for system simulation is: 1. Human factor
2. External factor 3. Area
A truck simulator provides an opportunity to reproduce the characteristics of real vehicles in a virtual environment. It replicates the external factors and conditions with which a vehicle interacts enabling a driver to feel as if they are sitting in the cab of their own vehicle. Scenarios and events are replicated with sufficient reality to ensure that drivers become fully immersed in the experience rather than simply viewing it as an educational programs me.
The simulator provides a constructive experience for the novice driver and enables more complex exercises to be undertaken by the more mature driver. For novice drivers, truck simulators provide an opportunity to begin their career by applying best practice. For mature drivers, simulation provides the ability to enhance good driving or to detect poor practice and to suggest the necessary steps for remedial action. For companies, it provides an opportunity to educate staff in the driving skills that achieve reduced maintenance costs, improved productivity and, most importantly, to ensure the safety of their actions in all possible situations.
Q2. Why simulation is required to study real time systems. Elaborate with the help of example.
Ans: Adequate testing of computer programs in a real-time environment can
be difficult, if not impossible, without the assistance of specialized hardware and software test tools and techniques. Unfortunately, software is presently tested by inadequate manual methods. The major shortcoming of this method
is that the human tester cannot be very thorough or efficient when he must test a vast number of functions in a sophisticated software system. The Integrated Simulator described in this paper provides for computer-aided testing in an interactive real-time environment. The method employs real-time, digital computer software simulators to assist the tester by collecting data, exercising the system being tested under varying loads, and supplying test stimuli to evoke predictable system responses, thus reducing the time, manpower, and cost of program testing.
MPEG coding dramatically reduces the data amount for video. On the other hand, its bursts and cyclic nature creates a challenge for transmission in ATM networks. Various methods have been proposed to transmit MPEG streams, such as priority coding, dynamic bandwidth allocation and smoothing. This paper suggests another scheme to the problem. The original MPEG streams are split into n sub streams and the sub streams are skewed a fixed amount of time from each other. The sub streams are transmitted with the forward error correction code. It provides a deterministic bound on the delay and has the implementation simplicity needed for the high-speed video applications. We have tested the scheme on five real MPEG-coded video/movie stream traces. It significantly reduces the peak cell losses at the price of longer delay.
Q3. Differentiate between:
a) Continuous and discrete systems
Ans: Continuous System Simulation describes systematically and
methodically how mathematical models of dynamic systems, usually described by sets of either ordinary or partial differential equations possibly coupled with algebraic equations, can be simulated on a digital computer. Modern modeling and simulation environments relieve the occasional user from having to understand how simulation really works. Once a mathematical model of a process has been formulated, the modeling and simulation environment compiles and simulates the model, and curves of result trajectories appear magically on the user’s screen. Yet, magic has a tendency
to fail, and it is then that the user must understand what went wrong, and why the model could not be simulated as expected.
Continuous System Simulation is a highly software-oriented text, based on MATLAB. Homework problems, suggestions for term project, and open research questions conclude every chapter to deepen the understanding of the student and increase his or her motivation.
Continuous System Simulation is written by engineers for engineers, introducing the partly symbolical and partly numerical algorithms that drive the process of simulation in terms that are familiar to simulation practitioners with an engineering background, and yet, the text is rigorous in its approach and comprehensive in its coverage, providing the reader with a thorough and detailed understanding of the mechanisms that govern the simulation of dynamical systems.
A discrete system is a system with a countable number of states. Discrete
systems may be contrasted with continuous systems, which may also be
called analog systems. A discrete system is often modeled with a directed
graph (mathematics) and is analyzed for correctness and complexity
according to computational theory. Because discrete systems have a countable number of states, they may be described in precise mathematical
models. A computer is a finite state machine that may be viewed as a
discrete system. Discrete data only take on particular values and no values
in between. Data like the number of siblings a person has or the number of cars a person owns is discrete because you can either have 0 cars or 1 car or 2 cars and so on, but you can't own 1.5 cars.
Continuous data can take on any value on a range. Temperature and height are continuous because you can be 69.32894... Inches tall. You can be any fraction of an inch tall in that case.
Ans: A physical model is a smaller or larger physical copy of an object. The
object being modeled may be small (for example, an atom) or large (for example, the Solar System). Static simulation models can be used for analyzing relations of different process input and output variables. We have made the following static simulation models:
• Fiber line
• Brown stock screening
• Post screening
• Control of the TMP process
• The effect of filler on paper quality
• Quality control of LWC paper
• Calendar control
Dynamic simulation models can be used for analyzing and learning process
delays and dynamics in addition to all usages of static simulation models. We have made the following dynamic simulation models:
• Pulp mill liquor and steam balance
• Continuous digester dynamics
• Pulp mill sulfur / sodium balance
• Grinding plant (PGW)
• Paper mill short circulation
• Paper machine dynamics and grade change
• Power plant boilers and steam network
In dynamic simulation models of social systems the desired data may be unavailable, in an inappropriate form, or incorrect. There may be elements that are not usually quantified, but that are critical to the system being modeled.
Criticism of dynamic simulation models aimed at boundary issues frequently reflects different notions about the model's intended use or purpose.
Dynamic simulation models are often used to search for parameters that can effect behavior changes. Dynamic simulation models are especially useful in
predicting how a system would behave if various policies of interest were implemented.
c) Static Mathematical Models and Dynamic Mathematical Models
Ans: mathematical model uses mathematical language to describe a
system. Mathematical models are used not only in the natural sciences and engineering disciplines (such as physics, biology, earth science, meteorology, and engineering) but also in the social sciences (such as economics, psychology, sociology and political science); physicists, engineers, computer scientists, and economists use mathematical models most extensively. The process of developing a mathematical model is termed 'mathematical modeling' (also modeling).
Mathematical model are two type and difference between them:
1.
A static model does not account for the element of time, while a dynamic model does.2.
Dynamic models typically are represented with difference equations or differential equations.Part B
Q4. Delineate the Monte Carlo method for simulation in detail. How this method is useful in system simulation.
Ans: Monte Carlo simulation is a method for iteratively evaluating a
deterministic model using sets of random numbers as inputs. This method is often used when the model is complex, nonlinear, or involves more than just a couple uncertain parameters. A simulation can typically involve over 10,000
evaluations of the model, a task which in the past was only practical using
The Monte Carlo method is just one of many methods for analyzing
uncertainty propagation, where the goal is to determine how random variation, lack of knowledge, or error affects the sensitivity, performance, or reliability of the system that is being modeled. Monte Carlo simulation is
categorized as a sampling method because the inputs are randomly generated from probability distributions to simulate the process of sampling from an actual population. So, we try to choose a distribution for the inputs that most closely matches data we already have, or best represents our
current state of knowledge. The data generated from the simulation can be
represented as probability distributions (or histograms) or converted to error
bars, reliability predictions, tolerance zones, and confidence intervals.
Q.5. By taking an example, analyse and design a system for Simulation. How will you use the concept of subsystems in it?
Ans: Let's consider an industrial manufacturing example where we will build a
model which has numerical, not graphical, output. Terms such as ``computer-integrated manufacturing" (CIM) and ``flexible manufacturing" guide the development of more productive plant configurations for building products from raw material. We introduce the following categories and definitions:
1. Material. Plants are built to process material---often called raw material stock---and shape the material into a product. As raw material goes through its changes, it turns into a part to be processed.
2. Machines. Plants are composed of machines of all kinds which process material and parts. Some examples are ovens, lubricators, flame cutters, lathes, and robots.
3. Transportation. Material flows through a network of machines. The method of transport is affected by devices such as conveyors and automated guide vehicles (AGVs). During this transit, it encounters storage areas and accumulators which buffer parts until the machines can operate upon them.
Figure 3 shows a sample manufacturing system containing nine parts. This type of drawing is essentially a schematic defining the overall structure of the system but lacking details on dynamics and geometry. The raw stock arrives from the left via a central conveyor. At this point, the material stock is a cylinder shape. The cylinder parts are loaded into a spiral accumulator (A) which holds parts for the pick-and-place robot (R) until both it and the lathe (L) are ready. Once both are ready to work with the part, the cylinder is turned into a barbell shape by the lathe and sent on toward a second spiral accumulator using a conveyor belt. A second robot also performs a pick-and-place operation and hands the barbell part to a drill machine (D) which punches a longitudinal hole through the part. That is the final product part, which proceeds to a small storage bin taken by the AGV which runs around a closed track while dropping the bin contents into longer-term storage. This type of application involves discrete parts flowing through a network of resources. The resource constraints and network flow suggests the use of a Petri net to model the system as in Fig. 4.
Figure 3: Manufacturing line with two robots and two machines..
Figure 4 is the mathematical model for the system and is categorized as a
declarative model (i.e., the Petri net sub-states and events are visible and
emphasized in the model structure). In a nutshell, a Petri net operates by having tokens (the black circles) flow through the network while encountering resources (lathe, drill press, robot arm, AGV). Each resource operates or ``processes" a token as it passes by. This is the specification that we need to encode in the form of a program and then execute on a computer. There are many Petri net simulators to be found. One such simulator is a tool within SimPack (See section SIMPACK SIMULATION TOOLKIT), which is a toolkit for exploring mathematical modeling and simulation. Once simulated, this Petri net can yield data which is subject to analysis (the third sub-field of computer simulation). The types of analysis methods for simulations are plentiful. For our manufacturing example, we may simply want to analyze the throughput of the system as a whole to determine how many parts can be processed in one hour. Actually, we pre-determined our use of a Petri net model because we knew ahead of time that we wanted throughput information. If we had wanted, say, information on the stability of the robot arm controller then a Petri net would not have served our purpose. Moreover, if our Petri net model has a stochastic element (i.e., it uses random variants) then it is vital to make many simulation runs of the same model but with different samples; otherwise, we will not know the accuracy (measured by a confidence interval) associated with the simulation output.
Q.6. Elaborate the advantages of system simulation by taking Suitable examples.
Ans:
1. A simulation can give you results that are not experimentally measurable with our current level of technology. A simulation can give these results when problems such as it's too small to measure, the probe is too big and is skewing the results, and any instrument would turn to a gas at those temperatures come into the conversation. You can set the simulation to run for as many time steps you desire and at
any level of detail you desire the only restrictions are your imagination, your programming skills, and your CPU.
2. Most of the time the simulation testing is cheaper and faster than performing the multiple tests of the design each time.
For example In the case of electric thrusters the test must be run inside of a vacuum tank. Vacuum tanks are very expensive to buy, run, and maintain. One of the main tests of electric thrusters is the lifetime test, which means that the thrusters is running pretty much constantly inside of the vacuum tank for 10,000+ hours. This is pouring money down a drain compared to the price of the simulation.
3. Permit system designers to study a problem at several different levels of abstraction.
4. Allows the designer to determine the correctness and efficiency of a design before the system is actually constructed.
5. Simulators dynamically show the behavior and relationship of all the simulated system's components, thereby providing the user with a meaningful understanding of the system's nature.
