False Ceiling

CONTENTS

 FALSE CEILING

 INTRODUCTION

 PURPOSE

 ADVANTAGE OF FALSE

CEILING

 TYPE OF FALSE CEILING

 FALSE CEILING

TYPES:MATERIALS

 RATE

 Site visit

 CASE STUDY

 compsanies

 CONCLUSION

PURPOSE :

It improves aesthetical appearance( form, color, treatment etc.) & proportions by managing room –

heights Hides electrical cabling & provides space for recessed lights



Air-conditioning – hides ducting & reduces the volume of room Ugly structural members like

beams, etc that usually spoil the ‘look’ of the room are concealed/ camouflaged.



Provides insulation from heat.



Acoustical improvement.



soundproof rooms such as meeting rooms, auditoriums, etc, which require a quit environment?



As a design element.

A false ceiling is a ceiling that is suspended from the main ceiling. The suspension is fixed to the walls,

roof or beams of the superstructure. In simpler words, a false ceiling is a second ceiling created bellows

the original. It gives a beautiful homogeneous appearance and smooth finish.

WHAT IS FALSE CEILING ?

ADVANTAGE OF FALSE CEILING

The various advantages of False Ceilings making

them suitable for India:

•Durability

•Light Weight

•Portability

•Waterproof

•Fire Resistant

•Mild Acids and Alkali Resistant

•Unharmed by Fungus or Termites

•Easy Installations

TYPE OF FALSE CEILING

Suspended ceilings are a type of architectural design element used in commercial and residential

buildings. They are created using metal grid systems, which are suspended below the ceiling or roof

deck using a series of wires. The grid is then filled in with ceiling tiles, which are primarily made

from mineral fiber blends.

Exposed Grid

•Exposed grid varieties are the most

common type of suspended ceiling.

•They consist of long metal strips, called

"mains," which are interconnected with

shorter metal pieces known as "tees."

•Together, the mains and tees form a grid

system ,which are then filled with acoustical

ceiling tiles.

Concealed Grid

•Concealed grid systems use the acoustical tiles to

hide the grid system from view.

•This creates a smooth, clean which is aesthetically

pleasing.

•The tile used has a small groove built into it's

perimeter, which slides over the mains and tees to

cover them.

•This type is more expensive than an exposed system.

•It makes difficult for maintenance to access areas

above the ceiling.

CONCEALED GRID CEILING

Characteristics :

•Monolithic appearance

•Suspension from concrete soffit surface

•Ventilation ducts and other services

accommodated in plenum.

•Easy to create bulk heads and change levels

•Access panels provide service access.

EXPOSED GRID CEILING

Characteristics :

•Attractive pre-finished white surface

•Provides sound attenuation and

absorption

•Electrical and other services

accommodated in plenum

•Wide range of ceiling panels giving

smooth, textured, patterned or

FALSE CEILING TYPES : PROFILES

Visible profile ceilings

•

•In this very common system.

• profiles are always visible.

• Ceiling tiles rest on the profiles and are in most cases made from a mineral material.

• The two standard module sizes are 300 mm and 312,5 mm.

• The most popular tiles in this type of ceiling are for ceiling grids of 600x600 mm

and 600x1200 mm.

• In this type of ceiling, luminaries will be mounted as an inlay

Applications

These ceiling types are usually used when electrical wiring, LANs and other technical installations are

hidden behind the ceiling.

Also in this application the ceiling should contribute to the acoustic environment.

All Philips recessed luminaries are suitable for this kind of ceiling.

1. VISIBLE PROFILE CEILING

2. CONCELED CEILING

3. STRIP CEILING

4. PANEL CEILING

1.

This ceiling system consists of main carriers on

which metal strips are clicked.

2.

They have various widths.

3.

Luminaries are usually mounted in line with the

strips and perpendicular to the main carriers.

4.

In that case, a length profile mounted to the side

of the luminaries is required, or suspension

brackets at the head of the luminaries when the

luminaries fits in exactly between two main

carriers. (See figures)

Applications

Areas like corridors, airports, etc

.



The main carriers of these systems are usually placed at the main building

modules. These are often 1200 or 1800 mm.

Ceiling panels are mounted between the main

carriers. In this type of ceiling, metal and mineral

panels are used. If the distance between the main

carriers does not fit with the luminaries length these

luminaries can be lengthened so that they can be

mounted between the main carriers.

For profile A, the luminaries can be mounted as an inlay. Safety brackets can be

delivered on request with the luminaries.

When profile B is used, brackets are required and must

be ordered separately.

Also a 100% copy of the ceiling tile can be used with

integrated luminaries.

Applications

Areas where removable partition walls are used and acoustic performance of high quality is required.

In corridors each panel can span the total width (e.g. 1.8 m).

1.

GYPSUM BOARD FALSE CEILING

2.

METAL CEILING PANELS

3.

FIBREBOARED AND FIBRE/MINRAL REINFORCED TILES

4.

P.O.P. FALSE CEILING

5.

PLYWOOD FALSE CEILING

6.

E-BOARD FALSE CEILING

7.

ALLUMINIUM CEILING

8.

ARMSTRONG TILES FALSE CEILING

GYPSUM BOARD / GYPBOARD CEILING

These gypsum board ceiling are renowned as the thermostat

keeps the surrounding pleasant and cool and they are sound

resistant.

Lightweight, flexible and fire and moisture resistant, gypsum is

most commonly used for false ceiling.

Gypsum board panels are tough, versatile and economical, and

are fast replacing other ceiling materials such as POP.

Gypsum board can be used while constructing false ceiling. as

well as to renovate old ceilings.

The material is fire-resistant, waterproof, as well as soundproof,

which is why it is the most preferred material for false ceiling.

A gypsum panel could have tapered or square edges.

Panels with tapered adage are used for ceiling since the gap

between each edge can be filled, to give a smooth surface.

Square-edges board can be used. Where visibility of the joints is

a requirement.

A suspended Gypsum board ceiling can be constructed by nailing

Gypsum board panels to each other, or by fixing the panels in a

metal grid (usually steel).

GYPSUM BOARD / GYPBOARD CEILING

PHYSICAL PROPERTIES AND

PERFORMANCE

Installation overview

soffit

Perimeter channel fixed to the wall at required ceiling

Intermediate channel connected to the ceiling angle at required suspension height

Intermediate channel and ceiling section are

connected with each other by using connecting clip

Plasterboard screw fixed with drywall screw in staggered joint manner.

Plasterboard fixing complete, ready For jointing and finishing.

jointing and finishing is done on tapered edge joint.

• Thickness

9,5

12,5

15

(mm)

•

Edge

SE/TE

SE/TE

TE

•

Length (mm)

610,1220,

610,1220,1830,

2438 &

1830 & 2438

2438 & 3048

3048

• Width (mm)

610 &1220

610 & 1220

1220

•

Weight kg/m2

8,0

10,50

12,80

•

Thermal

0,16W/mk

0,16W/mk

0,16W/mk

Conductivity

•

Thermal

0,06m2K/W

0,08m2K/W

0,09m2K/W

Resistance

GYPSUM FALSE CEILING

Three Range based on :

Ae

st

hetics

• Characteristics:

• panel has perforations in

random pattern and are

economical, durable and

dimensionally stable.

• pre-painted and cooled

with special paint which is

washable and has

antimould growth and anti

-yellowing properties.

• Applications :

• open areas in office spaces

• reception areas

• showrooms

Functional

perf

ormance

• Characteristics:

• ceiling panels has vinyl

laminate or PVC film on

the face side for a superior

maintenance free surface

and is available in a

granular texture

• Applications:

• hospitals

• electronics

• pharmacy companies

Ac

oustical

perf

ormance

• Characteristics:

• This ceiling panel has

square holes in regular

pattern and is backed with

a special non woven

lining.

• This range provides

"excellent sound

absorption properties with

insulation mat.

• Applications ;

• Multiplexes &cinema

halls

• auditoriums

• sound recording studios

• educational institutes

Gypsum

Board

Ceiling

s

: Charact

eris

ti

cs

METAL CEILING

Lay In - Plain

Characteristics

Plain panels are

power-coated, produced from

high quality hot dip

galvanized steel offering

the best corrosion

protection.

Lay In - Perforated

Characteristics

Perforated panels are

power-coated, produced

from high quality hot dip

galvanized steel offering

the best corrosion

protection.

Infill of 0.4 mm high

quality glass fibre

acoustic fleece.

Clip In - Plain

Characteristics

•Plain panels are

power-coated,

produced from high

quality hot dip

galvanized steel

offering the best

corrosion protection

.

Clip In - Perforated

Characteristics

•Perforated panels are

power-coated, produced

from high quality hot dip

galvanized steel offering the

best corrosion protection.

•Infill of 0.4 mm high

quality glass fibre acoustic

fleece.

T-Cell Open Plenum

Characteristics:

•These panels create

decorative and

functional open

ceiling environments.

•It has wide variety

of cell sizes.

Applications:

•Hospitals

• Retail

•Galleries

•Offices

METAL CEILING

DESCRIPTION

Thanks to the linearity of its shapes, the system

Enigma is sure the most uniform solution

among the range of Atena ceilings. This

version offers not only an elegant and aesthetic

impact, but also a simple and fast way of laying

and dismantling making easier the inspection to

the interspace

.

FEATURES

• Concealed structure (clip' in system)

• Bevelled edge 45° or right edge

• Accessibility to the interspace using the dismantling flat

• Prepainted and powder coated

• Wide range of perimeter solution

• Single and Double supporting structure

• Easy laying

SECTION

MetalWorks Mesh - Expanded Metal

MetalWorks Mesh - Welded Wire

MetalWorks Mesh - Woven Wire

MetalWorks Open Cell

MetalWorks Plank

MetalWorks 3D

Metal Works canopy _{MetalWorks Capz}

MetalWorks Concealed MetalWorks Linear MetalWorks Wings

MetalWorks Vector and Vector Exterior

MetalWorks Tin

METAL CEILINGS – STANDARD ( ARMSTRONG )

Metal Works Open Cell Systems

Key Selection Attributes

Lock-in System - Premium Option

Unframed panels connect to mounting and cross rails for self-suspending system - no other grid needed

System components include 2' x 2' panels, 8' mounting rails with

connectors, 2' cross rails, and suspension clips

Available in white in four interior cell sizes (3", 4", 6" and 8") Custom sizes and colors also available

Durable, powder-coated painted finish

Lay-in System - Standard Option

Framed 2' x 2' panels lay in standard 9/16" T-bar grid Fast, easy installation

Available in white in four interior cell sizes (3", 4", 6" and 8") Durable, powder-coated painted finish

Custom sizes and colors are also available

Capz – Metal Works, Optima, & Spectra

Metal Works Canopies

EFFECTS Wood Looks

MetalWorks SecureLock

Advantages of metal ceiling:

They reduce overall cost, since they are easy to install and access.

Hidden services can be easily accessed since the panels are removable.

They are ideal for workspaces which require clean environments and services that

require maintenance such as the machinery rooms, the AHU, etc.

They have a monolithic look.

They give the space a very modern look and blend well with glass.

•excellent sound absorption

•special anti-sag property

•superior moisture resistance

•Better fire resistance

•good light reflectance

•better relative humidity properties when

compared with conventional mineral fibre tiles.

• high insulation against sound and fire.

•material can be decorated with paint or other

finishes improving the aesthetics of the room.

Applications:

•shopping malls

•Retail showroom

•Offices

•Education

•Healthcare

•Restaurants

FIBERBOARDED AND FIBRE / MINERAL FIBER CEILING

PLASTER OF PARIS (POP ) CEILING

 Plaster of Paris (POP) is commonly used for constructing false

ceilings.

 Gypsum, which gives out water when heated, makes POP.

 Post-heating, gypsum softens and is then crushed to form a

powder. POP hardens instantly when water is added to it.

 It is applied to fibreboard or a wood base, which is then

suspended to form the false ceiling.

Advantages of POP:

 A smooth, uniform finish.

 The surface can be recorded or painted.

 POP false ceiling are easy to construct and maintain.

 The ceilings are reality light.

PLY WOOD FALSE CEILING

Plywood ceiling are widely used for their visual appeal.

These ceilings are created with strips of ply glued or nailed together.

The strips are held together and strengthened with ply supports at equal distances.

Ply ceiling are generally used in place with cold climates.

Advantage of ply ceilings:

They are strong and look appealing.

They can be given various finishes, or painted to get the right look.

They can be treated to increase their lifespan.

However, ply ceiling are difficult to maintain, since the are prone to termite attacks.

The room has to be thermally controlled to reduce the humidity in the air. Also, the

wood is prone to warping and other physical changes, with time.

E-BOARD FALSE CEILING

standard weight (Per sq.mt ) 5.5 kg

Equilibrium moisture 2 to 6%

Thermal conductivity 0.18kcal/MH degree C

Biological affect no fungal effect

Effect of relative humidity 0.2%

STANDARD SIZES

2.44 m x 1.22 m (8' x 4')

1.83 m x 1.22 m (6' x 4')

1.22 m x 1.22 m (4' x 4')

1.22 m x 0.16 m (4' x 2')

0.61 m x 0.16 m (2' x 2')

Thickness

4 mm, 5 mm, 6 mm

Key Selection Attributes

30 standard fabric and sailcloth finishes available 100% post-consumer woven fabrics coordinate with Soundsoak®_{Wallsand Diffusers}

Improve acoustics with excellent sound absorption

On average, one baffle per 40 square feet, or 20% coverage, reduces reverberation time by approximately 50%

Easy to install with sleek, adjustable aircraft cable hanging kit Seismic approved Additional colors, sizes, and edge details available

Baffles

2' x 4' size

with fabric and sailcloth finish options. Baffles use either a grommet or eyehook for

attachment or suspension from structure. 2' x 4' x 2" Baffles have an eyehook and 2' x 4' x 1-½" Baffles have a grommet.

MATERIAL N FINISHES

Baffles have a rigid fiberglass core encased in fabric or nylon.30 standard color options

1.Baffle Hanging Kit – Fully Suspended

2. Attach to Bar Joists – Parallel

I n s t a l l a t i o n

Soundsoak Baffles can be independently suspended using the Baffle Hanging Kit . Each kit contains 2 8-1/16” aircraft cables, 2 carabineers and 2 quick release adjusters. You must have a hole to loop the aircraft cable through the

anchor. Slip the quick release adjuster onto the cable. NOTE: the cable is inserted into the large rectangular hole as noted by the arrow.

Next, thread the end of the cable back into the other end of the adjuster to secure the cable loop onto the anchor. Adjust the elevation of the cable carabiner to be at the top of the baffle. To release the cable, take all weight off the adjuster, use your thumb to pull the side release tab down and simply slide the cable out as needed. Snap carabiner into the Baffle grommet or eyehook. If needed, adjust the elevation using the quick release adjuster to level.

Soundsoak Baffles can be wire tied directly to the top or bottom of bar joists. These Baffles will be parallel to the bar joists

. Baffles attached at the top will hang beside the joist. Baffles attached at the bottom will hang below the joist. Thread the tie wire through the grommet or eyehook and then around the bar joist. Twist the wire to complete the connection.

3. Attach to Bar Joists – Perpendicular

can be installed perpendicular to the bottom of bar joists. Install a tight cable support system (by others) for baffle attachment. Secure anchors at both ends into the wall. Attach the cable, thread the cable above the lower bar of the joists, and use a turnbuckle to tighten the cable. For long runs of cable or wide spacing of bar joists, addition vertical cable

4. Direct to Structure

Attach the appropriate anchor to structure. Thread the tie wire through grommet or eyehook in baffle. Next thread the tie wire through the hole in the anchor. Twist wire to complete the connection. Do not over tighten wire or put excessive force on grommet, this may cause Baffle failure. Tie wires should be plumb, avoid wires at angles that cause stress to the grommets or eyehook.

support may be required. Attach baffle to cable with tie wire. Tie wire connection should be snug to cable to minimize Baffle slippage.

Sustainable Products (Armstrong)

MINERAL FIBER

High % of Recycled Content

Ceiling-2-Ceiling options with high post-consumer recycled content from our closed loop process

100% Recyclable

AirGuard™, the first coating for ceiling tiles that actively removes

formaldehyde and other aldehydes in indoor air No Added Formaldehyde Products

30 Year Performance Guarantee Multiple Manufacturing Locations Contributes to LEED MR Credits

FIBERGLASS CEILINGS

70-75% recycled content

Energy-saving high light-reflective finish Recyclable

Substrate resists mold/mildew and bacterial growth Smooth, clean, durable finish

Lightweight, easy to handle

New Optima® _{fiberglass substrate made with a}

plant-based binder

SUSPENSION SYSTEMS

63% High Recycled Content (HRC) Grid available as standard option (Interlude, Prelude, and Suprafine)

All Armstrong suspension systems contain 30% recycled content, with the highest percentage of post consumer content in the industry (23%)

The only standard High Recycled Content Drywall Grid and Framing System in the industry. Selected items available in HRC with a total Recycled Content of 61% (Post Consumer 53%, Pre Consumer 8%) Recyclable

Patented Peak Form for extra strength & Stability Rotary stitched for additional strength and stability Multiple manufacturing locations

TECHZONE

Energy Savings System

Cost Savings and Increased Light Levels Earn up to 3 LEED Credits wit Hi-LR ceilings High Recycled Content Options

FALSE CEILING TYPE

METAL CEILING PANELS

FIBREBOARED AND FIBRE/ MINRAL REINFORCED TILES

P.O.P. FALSE CEILING

PLYWOOD FALSE CEILING

E-BOARD FALSE CEILING

ARMSTRONG TILES FALSE CEILING

₨ 40 /pc(s).

Price:

used in theatres, libraries, lounges, shops,

cafeterias, cloakrooms and canteens.

various sizes and colours

airport terminals, metro stations, hospitals,

pharma units and shopping malls.

homes, offices, restaurants, hotels,

malls, hospitals

they are sound resistant.

Any type of suspended ceiling

will be expensive. The cheapest

route is drywall.

Price:

₨ 50 /pc(s).

POP false ceiling:

•

30/- per sft. to soon depend upon the design & Pattern.

•

Labor cost is high.

Gypsum board false ceiling:

•

Plain gypsum board ceiling panel: 40/- per sft.

•

Gypsum board poly Ceiling panel: 47/- per sft.

•

Gypsum board PVC laminated Ceiling panel: 70/- per sft.

•

Gypsum board Semi Perforated Ceiling panel: 48/- per sft.

•

Gypsum board Fully Perforated Ceiling panel: 60/- per sft. without

glass-wood.

•

Gypsum board Fully Fissured Ceiling panel: 60/- per sft.

•

Gypsum board Silt Ceiling panel: 64/- per sft. without glass-wood.

1.Under construction (ceiling completed) Sector 15 ,house no :2715

2.Under construction Sector 13 ,house no :294

SITE VISIT

3.Under construction Sector 13 ,house no :294

4. Liberary (dcrust,murthal)

Under construction (ceiling completed) Sector 15 ,house no :2715

Suspended pop ceiling with different levels

Pop ceiling in the kitchen area

Space for cove light

Space for cove light

Material used in pop ceiling is:

Wire mess

Pop

Wooden plank (used for finishing the pop).

The frame which hold the slab with the wire mess and

pop ceiling.

Wire mess supported by frame (fasner n

pati )and over it the pop is done

Size of jali 50’x4’)

20 kg putti of 120,150,180….depending upon the type

of company.(sakarni plaster)

Under construction Sector 13 ,house no :294

Pop ceiling with +,-

Different design of pop ceiling

The cost of these ceiling is less as there is no use of frame,wire mess used

One of the best method for pop ceiling with is quiet cheaper as compare to suspended pop ceiling.

+ - 00

+ 20mm

it

It takes about 4 hrs to dry complete

layer.

Pop is done in different layers one

over the another depends upon how

much thick pop a client wants.

1 layer (pop)= 4mm thick = takes 15 min to dry

Under construction Sector 13 ,house no :294

1.Ist the ceiling

design is drawn on

the slab with the

help of thread

(soot).

2.Then the Patti is

connected to the slab

by fasner/bolt

3.The distance between the

two patti is 1’

A

3.Connected to wire

mess

4.C-channel

connected with

fasner/bolt

5 c-channel

connected

with

fasner/bolt at a

distance of 1’.

6. Now the whole frame will be covered with wire mess and then the pop layer will start.

Space for cove light.

Under construction Library of college

•4’x4’ gypsum board used in the

ceiling

Gypsum board ceiling

•2.5’ suspended gypsum

ceiling from the 0.0 lvl

•‘W’ channel used in

gypsum ceiling

•Wall angles are available in 10’

length:-

•L-shaped moulding that supports

and finishes the ceiling around its

perimeter.

•Gypsum board panels to each other, or by

fixing the panels in a metal grid (usually

steel).

•Generally, gypsum panels of 600

mm×600mm are used.

Under construction Library of college

•Gypsum board used around the grid

ceiling.

•The space above this ceiling is often used as a

plenum space

for ventilation systems, requiring only enclosed ducts that

deliver fresh air into the room below. Return air enters the

ceiling space through open grilles across the ceiling.

•The ceiling consists of a grid-work of metal channels in the

shape of an upside-down "T", suspended on wires from the

overhead structure. These channels snap together in a regularly

spaced pattern – typically a 2×2 or 2×4 foot grid or 600×600 mm

grid

•Each cell is filled with lightweight "tiles" or "panels"

which simply drop into the grid.

Under construction Library of college

•Most tile material is easily cut to allow fixtures in

other shapes, such as

incandescent lights

,

Metro station

Gypsum board

panels used in metro

ceiling

The grid of the ceiling

is suspended by

metal channel

•Wall angles, main tees and cross tees used in

making the grid for gypsum ceiling

CASE STUDY OF FALSE CEILING (JEWELLARY SHOWROOM)

SHOPPING MALL (AMBIANCE ,GUDGAON)

KIOSK

SHOWROOM

BAKERY SHOP

JEWELLARY SHOP

Front elevation



 SQUARE SHAPE WOODEN BOX OF (1.2’,1.2’ ) FOR DISPLAY OF JEWELLARY AT 5’HT .

STORE

SEATING

JEWELLARY SHOP

Reception area where the customer can discuss about there design of jewellary.

Store area.

Wooden L-shape table which serves as display. Glass façade on all four sides of shop.

STORE

SEATING

Pop false ceiling with resist lights used.

Elevations is treated with wooden lines..in curve patterns..

 19 mm board of Amul Teak wood is used in furnitures and elevation design which is at cost of Rs. 44/sq.ft.

 Display boards are finished with Veneer, Donipolo in size 10’x5’ at cost of Rs. 154/sq.ft.

 P.O.P. of Gyptone at cost of Rs. 25/kg.is used in false ceiling,

 Wire Mesh is used in P.O.P. at cost of Rs.550 per sheet.

Types of Displays in jewellery shop

JEWELLARY SHOP

 Square of 1.5’ ,1.5’ (ht.4’) embeded in marble stone wall elevation .

 L- shape table 2’ wide which serves as counter as well as display for jewellary.  Sq box made of wood is used in the front elevation for display.

 Stolls

STOOL FOR DISPLAY OF JEWELLARY

SQUARE EMBEDED IN A MARBLE WALL FOR DISPLAY (SIDE ELEVATION)

SQ MADE OF WOODEN IN FRONT ELEVATION

JEWELLARY kiosk

Equilateral Triangle in shape. size :7’x7’x7’

Ht 7’ (easily approcachable)

PLAN

JEWELLARY SHOP

ENTRANCE

COUNTER AT 3’ Ht.

DISPLAY AREA

Teak wood is used in furnitures which is at cost of Rs. 44/sq.ft.

 Display boards are finished with Veneer, Donipolo at cost of Rs.

Jewellary showroom Delhi

Pop ceiling in the

jewellary showroom

6” suspended pop

ceiling from the 0.0 lvl

Conceal lights are

used in this showroom

A big colored glass used in the middle of

pop ceiling. It has 8’ diameter and a light

install in between glass

JEWELLARY SHOWROOM

LOCATION : NIRANKARI JEWELLERS ,Edward Line,Kingsway Camp, delhi-110009 (Near civil lines area)

Fabric glass used in ceiling with the wooden molding of teak wood finished with veneer as per

approved Pop ceiling with cove light

Ceiling of entrance lobby.

Resist lights used in the false ceiling Split ac used .

19 mm board of Amul Teak wood is used in furnitures which is at cost of Rs. 44/sq.ft

 P.O.P. of Gyptone at cost of Rs. 25/kg.is used in false ceiling,

 Wire Mesh is used in P.O.P. at cost of Rs.550 per sheet.

entrance staircase

Bakery shop

entrance staircase Ceiling on the entrance made of teak wood finished with veneer as per approved with resist lights.

Play of levels with pop and wooden battens . Play of levels with pop

and wooden battens .

19 mm board of Amul Teak wood is used in ceiling as a wooden battens which is at cost of Rs. 44/sq.ft. finished with veneer. LOCATION :Edward Line,Kingsway Camp,

• Gypsum board false ceiling:

India Gypsum pvt. Limited

Regd. Office INDIA GYPSUM LIMITED: 815,Tolstoy House (8th Floor),

Tolstoy Marg, New Delhi-I 10001 Tel.: 3712167/8/9 Fax: 3355632

Works INDIA GYPSUM LIMITED: P.O. Box No.22,julianiViliage, Near jind Rly.Junction, jind

(Haryana)-1261 02 Tel.: 55267, 55549 Fax: 55549

Delhi Office

INDIA GYPSUM LIMITED

137, Sant Nagar, New Delhi-11 0065 Tel.: 6236289, 6236290, 6413272, 6427929 Fax: 6427929

Mumbai Office

INDIA GYPSUM LIMITED

9th Floor, 96 Bajaj Bhawan, Nariman Point, Mumbai-400021 Tel.: 2021125, 20210~5 Fax: 2841107

Calcutta Office

INDIA GYPSUM LIMITED

72, Til Jala Road, Near Don Basco, Technical institute, Calcutta-700046 Tel.: 2800363, 2809533

Chandigarh Office

INDIA GYPSUM LIMITED

SCO 13, Sector - 26, Madhya Marg, Chandigarh. Tel.: 2790303, 2791207

Various Companies

Aluminum & Metal false ceiling

:

LUXALON

A Hunter Douglas product Hunter Douglas

BMS, 10, plaza cinema building

Connaught Circus, New Delhi-11 0001 Tel.: 3320264, 3350040 Fax: 3310093

Vista LEVOLOR

ALPS TEXTILES PVT. LTD.

B-4, D/3, Shopping cum facility centre, D.D.A.Alaknanda,

New Delhi – 110019. Tel. – 26446658, 26476640, 26417519.

Fax: 91-11-26428609

E-Board false ceiling:

Eternit Everest ltd.

An ACC group company

Everest House, E-62, Greater Kailash-I, New Delhi – 110048,

Tel. – 011-26432568, 26432569 Fax : 011 - 26464006

Armstrong false ceiling:

INARCO LIMITED

15-A/24, East Patel Nagar, New Delhi – 110008,

Tel. – 011-25772724, 25772725 Fax : 011 - 25772724

34-Corner Market, Malviya Nagar, Delhi - 110017 | Call: +(91)-11-66434196

Eon Interior Product Pvt Ltd

ARK International

Plot No-428, Opp Star Gym,M G Rd, White House, Gurgaon - 110030

Modern Plaster Corp

4/4, NR Bank Of India, D B Gupta RD, Pahar Ganj, Delhi - 110055

ARMSTRONG TILE FALSE CEILING

Aar Cee Sons

312-313,P P Tower, Netaji Subhash Place, pitampura, Delhi - 110088