• No results found

Wear properties of nanosilica filled epoxy polymers and FRP composites

N/A
N/A
Protected

Academic year: 2020

Share "Wear properties of nanosilica filled epoxy polymers and FRP composites"

Copied!
13
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1: Silicon molds for the fabrication of (a) dry sliding test specimen and (b) slurry  test specimen
Table 1: Operating parameters for dry sliding test  Parameters   Experimental Conditions
Figure 4: Examples of (a) polymer specimens and (b) FRP specimens, after dry sliding  wear test
Figure 5: Slurry Vessel (with diameter = 120 mm, height = 120 mm)
+5

References

Related documents

Transcriptional regulation and the evolution of development GREGORY A WRAY* Department of Biology, Duke University, Durham, North Carolina, USA ABSTRACT A growing body of evidence

Our aim was to compare changes in EFL index values measured by FOT, with symptoms of dyspnea measured by the Borg score, in subjects with and without flow-limited breathing

Yazar et al 12 demonstrated that serum MMP-9 levels were not associated with chemotherapy curative effect; however, Ertan et al 13 found decreased serum MMP-9 levels only

bez jakékoli místně speci fi cké kalibrace metod výpo- čtu R G , tj. byly založeny výhradně na již dostupných koe fi cientech a konstantách vzešlých z předchozích

A very nice hotel is the Chancery Court Hotel, where probably most delegates will be staying Regarding individual reservations at this hotel and best available rate, please

Basic academic skills testing is used at a College of Applied Technology to determine a student’s basic skill level in the areas of reading, math and locating

Based on the results of the study, for thicker slabs, the shear stiffness is higher and therefore the presence of shear lag is attenuated. It is clear that when the slab thickness is

Daniel, Samantha, "Immigrant and non-immigrant youth in Canada: Cultural orientation, ethnicity of friends, and life satisfaction among four ethnic groups" (2013)..