FAQs: MATRIX NAVAN CNX200. Q: How to configure port triggering?

If you have forgotten your G.DUO’s IP address or password, you can restore your G.DUO to the default settings by pressing on the “reset button” for more than 5 seconds.. You

In the field “IP Address” the IP address of the Converter is defined; In the field “SubNet Mask” the Subnet Mask of the Converter is defined; In the field “Port” the Port of

The Maintenance feature allows you to change the password for the selected switch, perform a device reboot, reset the switch to its factory default settings, or upgrade the

To reset the switch to factory default settings, select “Delete – current configu- ration and local” and then click on the “Delete configuration” button (the IP address will

Press and hold a port selection switch for more than 2 seconds to bring the KVM, USB, and Audio focus to the computer attached to its corresponding port.. Press and hold port

Press and hold a port selection switch for more than 2 seconds to bring the KVM, USB, and Audio focus to the computer attached to its corresponding port.. Press and hold

In Username and Password, enter your Username and Password provided to you by your Server (Created in NAVAN while adding PPTP member i.e. User Name as test and Password as

Maintenance - allows you to change administrator password, reboot the switch, reset to factory default settings and if the feature is available on the selected switch, upgrade switch