AMP/WALDOM MOLEX SOLDERLESS AMP/WALDOM
Full text
Figure
Related documents
The EIA-232 synchronous modem cable is a twisted pair cable with a male HD-15 (high-density DB-15) connector at one end and a female DB-25 at the other end.. EIA-232
This tool is specifically designed for installation of the drive pin used with bond-in type bushings (see Parts Bulletin 1402 and Service Bulletin T & T 353). 204-1117
This specification covers the performance, test and quality requirements for the cable connector plug and two board connectors.. The cable connector plug assembly is used to connect
For the D-type video capture card, plug the black video/audio cable into the black connector on the GV-650/800 Card; the blue video cable into the blue connector, as
Pin assignments (cont’d) I/O cover SCSI cable, D–1 modem loopback connector, D–8 printer/communications connector, D–4 printer/console loopback connector, D–5 sound connector
As a small school, with enrollment restricted to court-ordered students, our primary strategy to increase access to technology for both students and teachers is to deploy
Connect the monitor VGA signal cable to the VGA connector on the computer, or connect the DVI-D signal cable to the DVI connector on the computer.. Be sure that the computer power
If the graphics hardware on your computer has a DVI connector, use a DVI to HD-15 adapter (sold separately) to attach the other end of your Matrox input cable to your computer..