• No results found

design and development.

N/A
N/A
Protected

Academic year: 2021

Share "design and development."

Copied!
16
0
0

Loading.... (view fulltext now)

Full text

(1)
(2)

Contents

1 Application Block Diagrams ...2

2 Recommended Product List ...3

3 Signal Processing System: Single-Chip Signal Processing LSIs for Blu-rayTM Players ...4

4 Signal Processing System: Back-end Signal Processing LSIs for Blu-rayTM Recorders ...5

5 Optical Pickup Units: 2-wavelength Laser Diode...6

6 Optical Pickup Units: Playback Laser Diode Driver ...6

7 Optical Pickup Units: Front Monitor Photo IC ...7

8 Other Peripheral Devices: Intelligent Power Device (IPD) for Power Supplies ...7

9 Other Peripheral Devices: Photo IC for Remote Control Reception ...8

10 Other Peripheral Devices: Luminance Sensor ...8

11 Other Peripheral Devices: Panel Control Display Microcomputer 1 ...9

12 Other Peripheral Devices: Panel Control Display Microcomputer 2 ...9

13 Other Peripheral Devices: Panel CEC-control Display Microcomputer ...10

14 Other Peripheral Devices: General-purpose MOS FET ...10

15 Other Peripheral Devices: Small Signal Transistor Series ... 11

16 Other Peripheral Devices: Diode Series ... 11

Panasonic proposes the latest optical disc solutions.

Thanks to recent advances in AV digitalization, our products now provide not only the means to record and play back video content, but also an interactive

experience that links users and their content to the Internet. As a semiconductor manufacturer with a wide range of industry-prominent product groups and

solutions, our company can respond to the various needs of customers during the development of optical disc-related products. We will continue to make

advances in technological innovations to provide a comprehensive lineup of semiconductor products that will please our customers and contribute to set

design and development.

(3)

Panasonic proposes the latest optical disc solutions.

Thanks to recent advances in AV digitalization, our products now provide not only the means to record and play back video content, but also an interactive

experience that links users and their content to the Internet. As a semiconductor manufacturer with a wide range of industry-prominent product groups and

solutions, our company can respond to the various needs of customers during the development of optical disc-related products. We will continue to make

advances in technological innovations to provide a comprehensive lineup of semiconductor products that will please our customers and contribute to set

design and development.

Application Block Diagrams

¢

Blu-ray

TM

Player System Block Diagram

Optical pickup unit Laser diode

Laser diode driver

PDIC Digital signal processing LSI

MN2WS0260

SDRAM Flash Ether PHY

AV output

Blu-ray DiscTM/DVD/CD

Motor Driver

¢

Blu-ray

TM

Recorder System Block Diagram

Blu-ray DiscTM/DVD/CD

Digital signal processing LSI PH1-Pro 3 MN2WS0140

SDRAM Flash Ether PHY

HDD Vin Ain 1394 PHY 1394DV / TS Modem VCXO B-CAS Digital Tuner Digital Tuner AIOF SUB AADC AV-SW Terrestrial analog tuner Vin D S CV Output driver AV input/output D/O SPDIF/COAX Timer micon HDMI (Tx) Laser diode Laser diode driver FMD PDIC FEP Optical pickup unit Motor Driver

(4)

2. Recommended Product List

Component Units Recommended Product Part No. Reference Page

Signal Processing

System Digital Signal Processing LSI MN2WS0260 (for players)MN2WS0140 (for recorders) 4, 5

Optical Pickup Units 2-wavelength Laser LNCT28PF LNCT22PK 6

Laser Diode Driver AN22210A 6

Front Monitor Photo IC PNA4U62F 7

Other Peripheral Devices Intelligent Power Device (IPD) MIP2E* Series

MIP2K* Series MIP3EMIP2F** Series Series 7 Photo IC for Remote Control

Reception PNJ4805M Series 8

Luminance Sensor PNJ4K01F PNJ4K11F 8

Panel Control Microcontroller MN101E29 Series

MN101EF50D MN103LF08 Series MN101E31 Series MN101EF32D MN101EF57G 9, 10

General-purpose MOS FET SK860301

SK860302 SK850305 SK850306 SK840303 SK830305 SK830306 FK8V0303 FK8V0304 FK8V0305 FK8V0306 FC8V3303 FC8J3304 10

Small Signal Transistor Series DSA2001

DSA2002 DSA2005 DMA50*** DRA51*** DMA56*** DSC2001 DSC2002 DSC2005 DMC50*** DRC51*** DMC56*** 11

Diode Series DA2J101

DA3X102D DA3X103E DB2J317 DB2W318 DB2X414 DZ2J*** Series DZ2W*** Series 11

(5)

3. Signal Processing System: Single-Chip Signal Processing LSIs for Blu-ray

TM

Players

¢

Overview

MN2WS0260 is a single-chip signal processing LSI exclusively for Blu-ray 3DTM players, combining a front end for reading

signals from Blu-ray DiscTM and a back end for converting this into AV data.

By using this product, Panasonic will be able to realize smaller sizes and lower power consumption in Blu-ray DiscTM players

compatible with the Blu-ray DiscTM 3D standards.

¢

Product Information

Front-end Functions

Compatible Media Playback of all optical disc media for BD-ROM, BD-R / -RE, DVD-Multi, +R, +RW, CD Digital Read Channel

Functions Built-in data PLL; PRML signal processing function

Peripheral Circuits 16-bit timers, 8-bit timers, serial systems, etc.

Back-end Functions

CPU AM34-SMP (32-bit symmetrical multiprocessor technology) 2CPU Operating voltage: 486 MHz, MMU, FPU build-in

Cache memory (per 1CPU): Instruction cache: 32 Kbytes, Data cache: 32 Kbytes Video Decode MPEG-1, MPEG-2 (MP@HL), MPEG-4 AVC / H.264 High Profile / Main Profile, VC-1 Advanced Profile, PNG, GIF, JPEG Baseline, etc. Audio Decode MPEG-1, 2 Layer2, MPEG-2AAC, dtsDolby Digital, Dolby Digital Plus, Dolby, dts TrueHD, etc. HD, Linear PCM (DVD / BD),

Graphics Functions 2D / 3D graphics

Stream Control Encoding and decoding / authentication / copyright protection processing Media decoding (CSS, CPRM, CPPM, BD CPS, AACS / BD+, etc.) Peripheral Functions Media / network I/F: SD-Card Others: Digital video / Audio OUT, Video DAC, etc.× 2, USB (HS) × 2, HDMI

External Memory 32-bit DDR3-SDRAM 1333 MHz, max. 4G-bit

Operating Frequency 486 MHz (Max)

Power Supply Voltage 3.3 V (I/O) / 1.5 V (DDR3) / 1.2 V (internal)

Package BGA521-P-2727Fi (27 mm 521 pin BGA)

¢

Applications

AV output (HDMI) Single-chip LSI for Blu-ray DiscTM players

Band insurance memory control Stream I/O Graphics engine AV I/O Front end Back end

CPU AM34-SMP Front end Optical disc controller Digital read channels Servo UniPhier Processor Memory Memory Home NW www

¢

Image Sample

MN2WS0210 BGA521-P-2727Fi

¢

Points on Appeal (Features)

• Supports Blu-ray 3DTM.

• Peripheral IF such as USB (HS), HDMI (ver. 1.4), etc. are built in and the data bus width for external memory has been made 32-bit to greatly reduce system cost.

(6)

4. Signal Processing System: Back-end Signal Processing LSIs for Blu-ray

TM

Recorders

¢

Overview

MN2WS0140 is equipped with Panasonic's original MPEG-4 AVC / H.264 codec engine to provide simultaneous long-time recording of 2 full-HD broadcasts.

In addition, playback of discs conforming to the Blu-ray 3DTM standards created using the cutting-edge image compression

standard MPEG-4 MVC is also possible.

By using this backend signal-processing LSI, a low-power-consumption Blu-rayTM disc recorder / player that can play back

Blu-ray 3DTM discs and perform simultaneous long-time recording of 2 full HD programs can be achieved.

¢

Product Information

Functions

CPU

AM34 32-bit symmetrical multiprocessor technology (2CPU) Operating voltage: 500 MHz, MMU, FPU build-in

L1 Cache memory (per 1CPU) Instruction cache: 32 Kbytes, Data cache: 32 Kbytes L2 Cache memory 128 Kbytes

Video Decode MPEG-1, MPEG-2 (MP@ML, MP@HL), MPEG-4 AVC / H.264 ([email protected], MP), VC-1, MPEG-4 SP / ASP L5, DivX Ver 3, 4, 5, 6 JPEG DSC Exif V2.1-compliant, JPEG BD-J BG (for BD-J Background Plane)

Video Encode MPEG-2 (MP@ML) SD, MPEG-4 AVC / H.264 HD / SD, MPEG-1

Audio Decode MPEG-1, 2 Layer2, 3, MPEG-2AAC, Dolby Digital, dts, LPCM, PPCM, etc.

Audio Encode MPEG-2 AAC / SBR, MP3, Dolby Digital, LPCM 2-ch, etc.

Graphics Functions 2D / 3D graphics, multibit font engine

Stream Control

Transport stream decode processing

• Japan: BS / CS / ground wave (ARIB)

• U.S: Open Cable (MS-POD) / ground wave (ATSC)

• Europe: Satellite / ground wave digital (DVB)

Encoding and decoding / authentication / copyright protection processing

• Media encoding and decoding (CSS, CPRM, CPPM, BD, CPS, AACS / BD+, etc.)

• Digital TV CA (MULTI2, DVB common, etc.)

• Network encoding and decoding (DTCP, etc.) Peripheral Functions

Digital broadcasting I/F: Digital tuner input × 2, IC card I/F × 2, POD I/F

Media / network I/F: Serial ATA × 2, SD card × 3, USB × 1, IEEE1394 × 1, Ether controller × 1

Others: Digital video / Audio IN/OUT, Video DAC, etc.

External Memory DDR-3 Plus (Bus width: 64-bit, Frequency: 1333 MHz, Capacity: max. 6G-bit)

Operating Frequency 500 MHz (Max)

Power Supply Voltage 3.3 V (I/O) / 1.5 V (DDR3+) / 1.2 V (internal)

Package HBGA857-P-3535AID (857 pin BGA)

¢

Applications

Image output Audio IN/OUT Band insurance Memory controller Stream controller Copy right protection peripheral I/F Picture signal processing 2D/3D graphics A/V IN/OUT CPU AM34-SMP UniPhier  Processor Tuner Tuner Home NW Memory www HDD

¢

Image Sample

HBGA857-P-3535AID

¢

Points on Appeal (Features)

• Output of high-image-quality Blu-ray 3DTM created

using MPEG-4 MVC is possible.

• Equipped with new MPEG-4 AVC / H.264 encoder to enable simultaneous recording of 2 full-HD broadcast programs.

(7)

5. Optical Pickup Units: 2-wavelength Laser Diode

¢

Overview

LNCT28PF and LNCT22PK are 2-wavelength high-output lasers with monolithically integrated DVD laser and CD laser.

They contribute to making optical pickups for Blu-rayTM devices smaller and thinner by greatly reducing the number of optical

system components.

¢

Product Information

Part No.

CD Laser (λ = 785 nm typ) DVD Laser (λ = 661 nm typ)

Package Size Pulse Light Output Po (mW) CW Light Output Po (mW) Maximum Operating Temperature Tc (°C) Pulse Light Output Po (mW) CW Light Output Po (mW) Maximum Operating Temperature Tc (°C) LNCT28PF (100 ns, 50%)330 175 85 (30 ns, 35%)300 90 85 5.15 mm wide 1.8 mm thick LNCT22PK (100 ns, 50%)365 200 85 (10 ns, 30%)330 100 85 3.6 mm wide 1.2 mm thick

¢

Applications

Optical disc 2-wavelength laser

¢

Image Sample

<LNCT28PF> <LNCT22PK>

¢

Points on Appeal (Features)

• Monolithic integration enables high-accuracy light output spacing.

• CD/DVD laser light-source integration enables optical system simplification.

• Frame package achieves smaller and thinner size.

6. Optical Pickup Units: Playback Laser Diode Driver

¢

Overview

AN22210A is a playback laser diode driver that provides the necessary functions for Blu-ray DiscTM, DVD, and CD playback

on a single chip.

It is equipped with an APC (Auto Power Control) that enables individual laser output intensity settings per pickup and an output current drive circuit compatible with back-monitor-type common-cathode lasers.

In addition, a high-frequency superimposed oscillator and high-frequency spread spectrum function are built in, and EMI (Electro Magnetic Interference) is reduced.

¢

Product Information

Power Supply Blu-rayTM Power Supply Maximum Output Current (mA) APC Function PDIN Input Resistance (W) Output Current Scale Setting Output Current Setting High-frequency Superimposed Frequency (MHz) High-frequency Superimposed Frequency Control High-frequency Superimposed Amplitude (mApp) High-frequency Superimposed Amplitude Control Spread spectrum Function Output Current High-speed ON/OFF General-purpose Output Function Monitor Function 5.0 V 8.0 V to 10.0 V 200  95 to

12.16 k 6-bit 8-bit 300 to 500 5-bit

(Blu-rayTM)

0 to 100 (DVD, CD)

0 to 50

7-bit settings4  2-terminal

L/H/Hiz/M temperatureIop IC

¢

Applications

Spindle Motor Motor Driver PDIC Laser Focus Tracking Tilt Spherical Aberration Compensator Sled Motor Optical Pick-Up Laser Diode Driver Signal Processing LSI

¢

Image Sample

QFN020-P-0304B

¢

Points on Appeal (Features)

• Compatible with back-monitor-type common-cathode lasers

• APC function enables per-pickup laser output intensity setting.

• Built-in high-frequency oscillator and spread spectrum function (EMI countermeasure)

• General-purpose terminal output function (2 terminals) Package: QFN type, 20-pin

Size: 3.2 mm × 4.2 mm

(8)

8. Other Peripheral Devices: Intelligent Power Device (IPD) for Power Supplies

¢

Overview

The IPD employs PWM control by the peak current control method under the rated load and intermittent oscillation control under light loads, providing high effi ciency from light loads to heavy loads and contributing to low power consumption during standby.

¢

Product Information

⇒ For details, go to: http://www.semicon.panasonic.co.jp/e-ipd

Series Example Part No. Over-heating Protection ProtectionOverload Overvoltage Protection Package 3 terminal saving energy

at standby MIP2E* / 3E* Series Latch intermittenceTimer None TO-220-A2DIP7-A1

For new compact power

supplies MIP2K* / 2F* Series Latch Foldback Latch DIP7-A1

¢

Applications

AC/DC Power Supply Section Main Power Supply AC Outlet Sub Power Supply SW Module IPD

¢

Image Sample

TO-220-A2 DIP7-A1

¢

Points on Appeal (Features)

• MIP2E*/3E* series products achieve unloaded power consumption of 0.1 W or less for worldwide input/output power supplies of 60 W or less.

• MIP2K*/2F* series products achieve unloaded power consumption of 50 mW for worldwide input/ output power supplies of 15 W or less, and are also equipped with a built-in ILIMIT input compensation circuit to reduce the dependence of the maximum output voltage on the input voltage.

¢

Caution Point

Please refer to "Precautions on the Sales of IPDs" provided in this catalog.

7. Optical Pickup Units: Front Monitor Photo IC

¢

Overview

A compact 3-wavelength-compatible photo IC for high-speed monitoring of laser diode light intensity in recordable-type optical disc (Blu-rayTM, DVD-R/RW/RAM, CD-R/W, etc.) equipment.

¢

Product Information

Part No. Operating Supply Voltage VCC typ. (V) Supply Current (Dark Condition) ICC typ. (mA) Output Voltage VO typ. (mV / mW) Output Offset Voltage Voff min. / max. (mV) Response Time tr, tf typ. (ns) Maximum Output Voltage Vomax. typ. (V) Package PNA4U62F 5 14 L: 1.24 M: 2.39 (λ = 405 nm) H: 4.65 -30 / 30 5 2.2 (8-pin)LGA L: 2.08 M: 4.04 (λ = 650 nm) H: 7.83 L: 1.86 M: 3.61 (λ = 780 nm) H: 7.00

¢

Applications

Spindle Motor Motor Driver FMD PDIC Laser Focus Tracking Tilt Spherical Aberration Compensator Sled Motor Optical Pick-Up Laser Diode Driver Optical Disc Controller

¢

Image Sample

PNA4U62F

¢

Points on Appeal (Features)

• Photo IC with built-in 3-wavelength-compatible photoreceptor

• Blu-rayTM 8 × speed compatible (fc 100 MHz; tr, tf: 5 ns) • Gain customization possible to match optical system

• Output temperature drift ±3% design

• Differential output system (with built-in reference voltage)

• Current output type also available (3-wavelength compatible PD)

(9)

9. Other Peripheral Devices: Photo IC for Remote Control Reception

¢

Overview

PNJ4805M series is a low-current-consumption type infrared remote control receptor photo IC. Multi-voltage compatible (VCC

= 2.7 V to 5.5 V), so current consumption is reduced compared to previous products.

Can be used for a wide range of remote-control applications, such as digital equipment like TVs, DVD equipment, etc., home appliances such as air conditioners, etc., and game equipment or electronic toys, etc.

¢

Product Information

(Ta = 25°C, Vcc = 3.3 V)

Part No. Application

Operating Supply Voltage VCC (V) Supply Current ICC (mA) Maximum Reception Distance L (m) Center Frequency fO (kHz) Package

Min. Typ. Max. Min. Typ. Max. Min.

PNJ4805M Series For IR remote control 2.7 3.3 5.5  0.3 0.4 9 32.7, 36.7, 38, 40, 56.9 Miniature lead type

¢

Applications

Photo IC

Remote Control Input

Microcomputer

¢

Image Sample

PNJ4805M Series

¢

Points on Appeal (Features)

• Low current consumption: ICC = 0.3 mA (typ) • Compact general-purpose package (lead type) 6.5 × 4.7 × 4.0 mm

• Abundant BPF central frequency lineup: 32.7, 36.7, 38.0, 40.0, 56.9 kHz

• Compatible with lead forming shape

• Metal holder compatible fir improved EMF noise characteristics

• Pb-free (conforms to RoHS directive)

10. Other Peripheral Devices: Luminance Sensor

¢

Overview

Photo IC with built-in photodiode and current amplifier circuit.

Senses ambient brightness and controls the screen brightness to maintain the screen's ease of viewing.

Has wavelength characteristics similar to the visual sensitivity of the human eye to enable control close to human senses.

¢

Product Information

Part No. typ.ICC

(mA) IO (VCC = 3.0 V) λP (nm) Package L = 0 lx (mA) L = 100 lx(mA) PNJ4K01F 480 4.3 43 560 KPTFTN6K0001 PNJ4K11F KPTFTN4K0002

¢

Applications

AD Converter Regulator Current Amp.

IOUT Iout × RL = Vin PD RL GND VCC GPIO CPU Analog Port Vo Switch for shutdown

LED Driver 10 Key LED LED Driver LCD back lightLED for

¢

Image Sample

PNJ4K01F PNJ4K11F

¢

Points on Appeal (Features)

• Small package: 1.5 × 1.55 × 0.55 mm (PNJ4K01F)

• Wavelength characteristics similar to the visual sensitivity of the human eye

• Good linearity of output current in response to incident luminance

PNJ4K01F: Linear output

(10)

11. Other Peripheral Devices: Panel Control Display Microcomputer 1

¢

Overview

8-bit microcomputer with Panasonic's original 8-bit CPU AM13E built in to provide the features of reduced code size, low power consumption, and high speed. They are equipped with LCD driver and diverse peripheral functions to enable reducing the component count and mounting area.

Lineup with various pin counts and memory size to enable application in a wide range of systems.

¢

Product Information

Part No. Internal ROM Type

ROM (Bytes) (Bytes)RAM

Minimum Command Execution Time/ Operating Voltage (ms/V) I/O Port Count (ports) [Single-chip mode] Interrupts (Factors) 8-bit Timers (Number) 16-bit Timers (Number) Serial Interface A/D Converter (ch) D/A Converter (ch) LCD High-accuracy Internal Oscillator Function Package Combined Synchronous Type/ UART Combined Synchronous Type/ I2C I2C MN101E29G M 128K 6K 0.05 / 2.2 to 5.5 90 28 7 3 4 1 1 16 4 SEG55 COM4  LQFP100-P-1414QFP100-P-1818B MN101EF29G F 128K + 4K MN101E31D M 64K 4K 0.05 / 2.2 to 5.5

70 23 7 2 3 1 1 12  SEG41 COM4  LQFP080-P-1414A MN101E31G 128K 6K

MN101EF31D F 64K + 8K 4K 0.05 / 2.7 to 5.5 MN101EF31G 128K + 4K 6K 0.05 / 2.2 to 5.5

MN101EF32D F 64K 4K 0.05 / 2.7 to 5.5 54 23 7 2 3 1 1 8  SEG32 COM4  LQFP064-P-1414

¢

Applications

LCD indicator/keys MN101EF29G Blu-ray DiscTM/DVD/CD Remote control I/O ports D riv er CPU Timer Spindle

motor Optical pickup Head amp

Optical disc controller Linear driver

¢

Image Sample

LQFP100-P-1414 LQFP064-P-1414

¢

Points on Appeal (Features)

• Built-in LCD driver

MN101E29 Series: 4COM × 55SEG

MN101E31 Series: 4COM × 41SEG

MN101E32 Series: 4COM × 32SEG

• Abundant lineup expansion

12. Other Peripheral Devices: Panel Control Display Microcomputer 2

¢

Overview

MN101EF50D/F57G are 8-bit flash microcomputers with Panasonic's original 8-bit CPU AM13E built in to provide the features of reduced code size, low power consumption, and high speed. They are equipped with accuracy internal oscillators and high-accuracy supply voltage detection circuits to enable reducing the external component count to achieve reduced system cost and simplifying equipment design. In addition, 3-phase/4-phase PWM functions for motor control are built in, simplifying the control of various motors such as stepping motors, brushless motors, ultrasonic motors, etc.

¢

Product Information

Part No. Internal ROM Type

ROM (Bytes) (Bytes)RAM

Minimum Command Execution Time/ Operating Voltage (ms/V) I/O Port Count (ports) [Single-chip mode] Interrupts (Factors) 8-bit Timers (Number) 16-bit Timers (Number) Serial Interface A/D Converter (ch) D/A Converter (ch) LCD High-accuracy Internal Oscillator Function Package Combined Synchronous Type/ UART Combined Synchronous Type/ I2C Synchronous Type

MN101EF50D F 64K 4K 0.125 / 1.8 to 5.50.05 / 2.7 to 5.5 55 30 7 2 3 1 0 12  SEG24 COM8 accuracy High-internal oscillator 1.6%

LQFP064-P-1414 MN101EF57G F 128K 6K 0.125 / 1.8 to 5.50.05 / 2.7 to 5.5 70 34 7 3 3 1 0 16 2 SEG41 COM4 LQFP080-P-1414ATQFP080-P-1212D

¢

Applications

LCD indicator/keys MN101EF57G Blu-ray DiscTM/DVD/CD Remote control I/O ports D riv er CPU Timer Spindle

motor Optical pickup Head amp

Optical disc controller Linear driver

¢

Image Sample

LQFP080-P-1414A

¢

Points on Appeal (Features)

• Ultra-wide supply voltage range: 1.8 V to 5.5 V

• Equipped with high-accuracy internal oscillator (16 MHz/20 MHz ±1.6%).

• Equipped with high-accuracy supply voltage detection (selectable from 10 potentials; accuracy: ±0.1 V).

• Equipped with PWM function (4-phase; phase-compensation 3-phase) to control various motors.

(11)

13. Other Peripheral Devices: Panel CEC-control Display Microcomputer

¢

Overview

MN103LF08 series is a power-management microcomputer for HDMI-compatible equipment such as recorders, televisions, AV amps, etc. HDMI-CEC, remote control photoreceptor circuits, and real-time clock are built in to achieve reduced power consumption when set is in standby.

It is equipped with internal oscillators and voltage detection circuits to enable reduced microcomputer peripheral component counts and reduced system cost.

¢

Product Information

Part No. Internal ROM Type

ROM (Bytes) (Bytes)RAM

CPU Performance (MIPS/MHz) [Dhrystone 2.1] Minimum Command Execution Time/Operating Voltage (ms/V) I/O Port Count (ports) Interrupts (Factors) 8-bit Timers (Number) 16-bit Timers (Number) Serial Interface A/D Converter (ports) DMA Controller (ch) Other Package Combined Synchronous Type/ UART Combined Synchronous/ Multimaster I2C

MN103LF08K F 256K 20K 38 / 40 25 / 2.2 to 5.5 88 71 6 7 5 3 16 4 HDMI-CECRemote control reception Real-time clock LQFP100-P-1414 QFP100-P-1818B

¢

Applications

Low-speed oscillator High-speed oscillator Reset IC voltage detection High-speed multiplier PLL CEC circuit Peripheral circuits CPU Video data CEC line HDM connector Internal reset IC CLKGEN

¢

Image Sample

LQFP100-P-1414

¢

Points on Appeal (Features)

• HDMI-CEC compatible

(Software development kit available)

• Remote control interface

Remote control signal reception: AEHA-format compatible

• Enables HDMI-CEC and remote control reception standby in low-speed clock drive condition

• Built-in oscillator and reset circuits enable reducing the number of microcomputer peripheral components.

14. Other Peripheral Devices: General-purpose MOS FET

¢

Overview

An advanced fine process delivers some of the industry’s lowest RDS (on) and Qg values. These energy-saving devices can boost device efficiency.

¢

Product Information

Polarity Part No. VDSS

(V) V(V)GSS (A)ID VGS = 4.5 V VRDS(on) (mWGS) typ. = 10 V (nc)Qg (pF)Ciss Package

Nch SIngle SK860301 33 ±20 44 2.5 2 22.5 3500 HSO8-F1-B SK860302 38 3.1 2.5 19 3000 SK850305 18 10 7 7 950 HSO8-F2-B SK850306 15 13 9 6 730 SK840303 22 7 5 10 1450 HSSO8-F1-B SK830305 16 10 7 7 950 HSSO8-F2-B SK830306 14 13 9 6 730 FK8V0303 12 8 5 10.2 1100 WMini8-F1 FK8V0304 10 11 7 7.2 750 FK8V0305 8 16 11 5.1 520 FK8V0306 6.5 22 15 3.8 360 Nch Dual FC8V3303FC8J3304 6.55.0 2248 1532 3.82.8 360220

¢

Applications

Vin DC/DC Controller Vout Nch MOS FET Nch MOS FET • Step-down circuit/ synchronous rectification Vin DC/DC Controller Vout Nch MOS FET • Step-up circuit

¢

Image Sample

WMini8-F1 HSO8-F1-B HSSO8-F1-B

   

2.4x2.9x0.8 4.9x5.9x1.0 3.05x3.05x1.0

¢

Points on Appeal (Features)

• Low RDS (on) and Qg values

• Package with integrated heat sink on bottom (HSO8, HSSO8)

(12)

15. Other Peripheral Devices: Small Signal Transistor Series

¢

Overview

This transistor series delivers a high level of reliability thanks to its use of an advanced fine process. Furthermore, use of compact packages helps reduce set size.

¢

Product Information

Function PNPPart No.NPN VCEO(V) (A)Ic Vce(sat) max.(V) Ic(A) hFE Package SIZE

L×W×H(mm) Single Tr DSA2001 DSC2001 -50/50 -0.1/0.1 0.5/0.3 0.1 210 to 460 Mini3-G3-B 1.5×2.9×1.1 DSA2002 DSC2002 -0.5/0.5 0.6 0.3 120 to 340 Mini3-G3-B-B DSA2005 DSC2005 -0.2/0.2 0.3 0.1 150 to 390 Mini3-G3-B Compound

Tr DMA50*** DMC50*** Varies with combination SMini5-F3-BSMini6-F3-B 1.25×2.0×0.7

Built-in

resistance DRA51*** DRC51***

-50/50 -0.1/0.1 - - - SMini3-F2-B 1.25×2.0×0.9

Compound

built-in resistance DMA56*** DMC56*** SMini5-F3-BSMini6-F3-B 1.25×2.0×0.7

¢

Applications

• Switching circuit • Power-supply circuit • Others

¢

Image Sample

Mini3-G3-B Mini6-G4-B

¢

Points on Appeal (Features)

• Improved reliability thanks to use of new process

• Various product lineup

• Compact surface-mount packages

• Use halogen-free resin in all part numbers

16. Other Peripheral Devices: Diode Series

¢

Overview

These diodes offer both compact size and high performance. They deliver a high level of reliability thanks to their use of an advanced fine process based on state-of-the-art technology. Furthermore, use of compact packages helps reduce set size.

¢

Product Information

Function Part No. VR(V) (A)IF (V)VF max.IF(A) IR max.(μA) Package SIZE

L×W×H(mm)

Switching diode DA3X102DDA2J101 80 0.1 - - 0.1 SMini2-F5-B 1.25Mini3-G3-B 1.5 ×1.7×0.7

×2.9×1.1 DA3X103E

Schottky barrier diode DB2W318DB2J317 30 1.02.0 0.520.43 1.02.0 200100 SMini2-F5-B 1.25Mini2-F3-B 1.6××2.61.7××0.80.7

DB2X414 40 2.0 0.49 2.0 200

Zener diode DZ2W***DZ2J*** PT=0.2WPT=1W Vz=2.4V to 39VVz=2.4V to 51V SMini2-F5-B 1.25Mini2-F3-B 1.6××2.61.7××0.80.7

¢

Applications

• Switching circuit

• Power supply circuits

• Constant-voltage circuit, surge protection circuit (Zener diode)

• Other

¢

Image Sample

Mini2-F3-B SMini2-F5-B

¢

Points on Appeal (Features)

• Low-VF/low-IR characteristics

• Extensive product lineup

• Compact surface-mount packages

(13)
(14)
(15)

Precautions on the Sales of IPDs

Attached table "IPD availability by customer"

1) The sale and/or the export of IPD products to customers located in certain countries is restricted by the Agreement made and executed by and between Power Integrations, Inc. and Panasonic Corporation. For details, refer to the following Attached table "IPD availability by customer."

2) IPD products purchased from our company, or its authorized agents, hereinafter referred to as our company, shall be used only for production purposes by those parties who have duly purchased IPD products. Those who have purchased IPD products shall not use such IPD products in unmodified form for re-sale, loan, or sample shipment for evaluation purposes to any other parties.

3) If a party who has duly purchased IPD products subcontracts its production to any other parties, including its subsidiaries or any other third parties inside and/or out of Japan, and the IPD products are consigned to such subcontracting parties thereat, such party is obligated to monitor and control the quantity of IPD products to prevent any of the aforementioned re-sale, loan or sample shipments from taking place.

4) In the event that any actual or threatened breach or violation of any of the above mentioned 2) or 3) has occurred or is about to occur, our company will hold all shipments of IPD products and may request the customer to disclose necessary documentation describing the status of our end-users and/or distribution channels.

Note) The products of MIP50, MIP51, and MIP7are excluded from above-mentioned precautions, 1) to 3).

Application

· For power supply · For DC-DC converter

· For power supply · For EL driver · For LED lighting driver · For lamp driver/

car electronics accessories

Companies/areas to which products cannot be sold

· Companies in European and American countries · Asian companies in Asia · Other local companies · Companies in European

and American countries · Other local companies · No restrictions in terms of

contract

Companies/areas to which products can be sold

· Japanese companies in Japan · Japanese companies in Asia

(50% or more owned) · Japanese companies in Japan · Japanese companies in Asia

(50% or more owned) · Asian companies in Asia · No restrictions in terms of

contract

MIP0 MIP3 MIP9L

Note) For details, contact our sales division. Parts No.

MIP1

MIP4 MIP2MIP9A

MIP52 MIP816/826 MIP50 MIP51 MIP55 MIP9E MIP7 MIP803/804

(16)

References

Related documents