• No results found

MODAL ANALYSIS OF A CRACKED CANTILEVER BEAM USING ANSYS WORKBENCH

N/A
N/A
Protected

Academic year: 2020

Share "MODAL ANALYSIS OF A CRACKED CANTILEVER BEAM USING ANSYS WORKBENCH"

Copied!
8
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig 1: Mode shape 1 without crack on a cantilever beam
Fig 5: Mode shape 2 on a cantilever beam with 5mm crack depth at position 0.790m from fixed end
Table 1:   The position of crack on cantilever beam is 0.790m Crack position
Table 3:  The position of crack on cantilever beam is 0.820m

References

Related documents

A Monthly Double-Blind Peer Reviewed Refereed Open Access International e-Journal - Included in the International Serial Directories.. Page | 43 POLITICAL ISSUES IN ROHINTON

The the sequenced strain N2 ( Harris and Rose 1986), transposase protein binds specifically to the terminal germline activity of these six transposons is regulated inverted repeats

This longitudinal cohort study adds to the present litera- ture by reporting on the estimated effect of physical activity on the HR-QOL assessed at two time points, 3 years apart, in

Cumulative incidence proportions for asthma exacerbations requiring hospitali- zation or emergency department care after 12 months of follow-up were 19.9% for those

The purpose of this paper is to identify barriers to effective discharge planning as identified by health care workers in an acute care medical teaching unit at a tertiary

This study aims to examine the issues using panel data from multiple provinces in 2006 and 2009, which provide information not only about the numbers of CTs and MRIs but also

The gateway for connected devices abstracts the access method through virtual interfaces tunneled to the Network Function Virtualization Infrastructure (NFVI).. The gateway forwards

To this end this project achieved a bi-directional flow of information between Patient and Key Personnel Team Members [ 2 ], continually evaluated the engagement process by