• No results found

PRECISION OF THREAD MANUFACTURING AND ITS INFLUENCE ON DURABILITY OF SCREWS WITH DIFFERENT THREAD PROFILES

N/A
N/A
Protected

Academic year: 2020

Share "PRECISION OF THREAD MANUFACTURING AND ITS INFLUENCE ON DURABILITY OF SCREWS WITH DIFFERENT THREAD PROFILES"

Copied!
5
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1. Calculation scheme and schemes of loading of threaded joints.
Fig. 2. Calculation scheme for triangular thread profiles.
Table 1. The loads F(i) on the most loaded thread in percentage of axial load F for metric thread M24 7G/7e6e: de=36 mm, H=18 mm, µ =0.3, f=0.1  Scheme of loading
Fig. 3.  Calculation scheme for rectangular thread profiles.
+2

References

Related documents

While labour market arrangements, such as part-time opportunities (when well-paid and protected), have a larger impact on the outcomes of women with higher educational

However, when the breast model with medium type F is considered (Fig. 16), all algorithms failed to differentiate between the tumor and the glandular tissue, and none

We therefore sought to evaluate the clinical characteristics and in- hospital outcomes of our cohort of elderly South-East Asian patients undergoing primary

Total state program enrollment ...4,982 1 School districts that offer state program ...18% Income requirement ...None (K4); Determined locally (SBPK) Hours of operation ...2.5 to

These include analysis of timber enterprise survey data, an analysis of ACIAR tree measurement data, collation of the Barangay Chairmen Tree Farm Inventory data, interviews

The PM tracks the project’s planning parameters, the commitments to and from its stakeholders, the risks and issues associated with planning and monitoring, the involvement

In this section, the channel model is assumed to be selective fading channel, where the parameters of the channel in this case corresponding to multipaths where two paths are

03.01.01 Safety Program: The aviation unit Safety Program shall be a written policy incorporated in the unit’s Operations Manual or in a separate manual, and shall include, but