• No results found

Improvement and Design of Transmitter Modifier Wind Cooling Protection for CINRAD/CB Weather Radar

N/A
N/A
Protected

Academic year: 2020

Share "Improvement and Design of Transmitter Modifier Wind Cooling Protection for CINRAD/CB Weather Radar"

Copied!
8
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1. A “Ebmpapst” DC fan.
Figure 2. PIC18F97J60PIN diagram.
Figure 3. (a) Current sampling circuit (b) Fan wind speed measurement input circuit.
Figure 4. Network interface output.
+2

References

Related documents

Arc fault detection device integrated with Residual Current Circuit Breaker with Overload Protection (RCBO) with contact position indication for control, protection

Fuses, fuse elements, fusible links, and circuit breakers are used as circuit protection devices.. Circuit protection devices are available in a variety of types, shapes, and

Control in weather-compensated mode when cooling via a heating circuit (underfloor heating circuit). When a separate cooling circuit is used, e.g. a fan convector, then control is

(b) Reducing operating costs if prices are constant... (c) Generating increased volume of sales with operating costs and price kept constant (d) all

• For IGBTs: gate drive circuit, Over-Current Protection (OCP), control supply circuit Under-Voltage Lock-Out (UVLO) Protection • Fault signal: corresponding to OC and UV fault.

The ground-fault protection for equipment is available on circuit breakers with Micrologic ground-fault trip units, and will trip the circuit breaker in the event of a

A ________ rated switchboard has a main circuit protection device that is equal to or greater than the available fault current, but subsequent downstream circuit protection

military jurisdiction implicit in Milligan and Quirin. In both cases, the defendants were accused of acting on behalf of organizations hostile to the United States. In Quirin,