• No results found

Optimizing the Sandwich Composite Structure in the Cantilever Beam

N/A
N/A
Info
Download
Protected

Academic year: 2020

Share "Optimizing the Sandwich Composite Structure in the Cantilever Beam"

Copied!
17
0
0

Loading.... (view fulltext now)

Download now ( 17 Page )

Full text

Loading

Figure

Figure 1. The beam cross section for Section 3.1.
Figure 2. The beam dimensions in different models. (a) The model in & 3.4; (c) the model the model inFigures 4-6, The model in Sections 3.2 & 3.3 (changing stiffness); (b) the model in Figure 7(a) & Figure 7(c), and Figure 9 & Figure 10, the model in Secti
Figure 3. The comparison of the vertical displacements among different element types.
Figure 4. the original beam position). (a) Displacement of the all steel beam, The displacement steel beam and the composite beam (the gray part shown in the displacement graphs are when Fe is used as the face material; (b) displacement of the composite be
+7

References

Download now ( PDF - 17 Page - 3.26 MB )

Related documents