Adept Seating. Seating GSA SIN 33721

(1)

MeTLSTORAGEMXitUPVERSÉPREPAREDeXTRINDEXEMERGEPREFIXREFERENCESMARTSPACESEATINGWORKSURFACESACCESSORIES

Adept Seating

Adept is our stylish, yet simple seating collection. The family consists of task chairs, café stools, guest chairs and nesting chairs. Easily create a unified and cohesive look in your office with an array of upholstery options and comfort controls. Be proficient, skilled, and comfort- able in today’s ever-changing workplace.

Seat Height:

Hips at or above knee level Knees bent to 85-110 degrees Feet stable on the floor Seat Depth:

2-3” of clearance behind knee Recline Tension:

Allow movement

Lumbar curvature supported Armrests:

Straight wrist postures

Wrists not resng on worksurface edge Relaxed shoulders

Monitor posion: Arm-length away

Top of monitor at eye level Monitor directly in line

(2)

VERSÉMeTLPREPAREMXitUPDeXTRINDEXSEATINGEMERGEPREFIXREFERENCEWORKSURFACESSTORAGEACCESSORIESSMARTSPACE

Adept Finishes

Paint

Color Code Guest &

Café ^Nesting ^Task

Black Mica Texture BLCK

_• _•

Silver Texture PR8

_•

Polished Aluminum PA

_•

Adept Upholstery Options

M-SEMU501 M-SEMU502 M-SEMU503 M-SEMU504 M-SEMU505 M-SEMU506

Grade 1

Apex • • • • •

Centurion • • • • • •

Contourett • • • • • •

Inertia • • • • • •

Grade 2

Appoint Seating • • • • • •

Dotty • • • • • •

Seed • • • • • •

Spin Seating • • • • • •

Adept COM Yardage

Back Option M-SEMU501 M-SEMU502 M-SEMU503 M-SEMU504 M-SEMU505 M-SEMU506

Mesh Back 1.0 1.0 1.0 1.0 1.0 1.0

Upholstered 2.0 2.0 2.0 1.5 1.5 -

(3)

COM Program

Maxon understands that customers may at times want to specify fabrics outside of Maxon's standard fabric offering. Our COM program was designed to make specifying COMs on Maxon products a simpler, friendlier, and hassle-free process. This process is simple and easy to use, and is described below under “Maxon to Supply (MTS).” If a Dealer wishes to manage the COM process themselves, they can do so by following guidelines under “Dealer to Supply (DTS)”. MTS is the preferred method for all COM fabrics. With MTS, Company will provide acknowledgment based upon planned date of receipt of COM fabric and manage the entire process. DTS is allowed if it is not a partnership fabric or if Company does not have access to the supplier. DTS may cause order delays and is strongly discouraged. Find out more about Maxon’s COM process by emailing our COM Department at maxoncomteam@maxonmail.com.

Maxon to Supply (MTS):

1. Select the fabric you wish to use and check the COM Search on maxonfurniture.com at: www.maxonfurniture.com/design- resources/textiles-and-finishes/com-search. Or Call Maxon Customer Service to see if the fabric you have chosen has already been tested and approved on the product you are interested in. You will need to have the COM supplier’s name, fabric pattern name, and color name to search for approved fabrics.

2. If your fabric is listed as an approved fabric, you may place your order directly with Maxon Customer Service. Please use the fabric code (e.g., S216426XP) from the COM Test Request on your order in the place of the standard fabric code.

If your fabric is not listed as approved, you will need to select the

“Request COM Test” link on the COM Search website. Your name, company name and email will be prepopulated fields. The secondary email, project name, and bid/contract number are optional information. The supplier, pattern, and color will show a list by clicking in the box and entering the first letter of the name and these are free form text boxes. Once that information is entered click add. (Multiple series can be added to the same request if they are the same supplier, pattern, and color.) Then click submit.

3. An email will be sent to the to the requestor stating the COM Request was successfully submitted. Up to four emails could be received: Testing materials requested, in testing, and final approval/ denial with price grade and fabric code. It’s rare actual test yardage is required. Testing is mainly done by reviewing the attributes of the fabric. The testing process takes approximately 48 hours. Written COM price quotes hold pricing for 90 days after issue date. 4. Once the fabric has been approved by Maxon, enter your order

directly with Maxon Customer Service. Maxon will purchase all COM fabric directly from the COM suppliers and schedule for production. In the event that the Dealer decides to cancel a COM fabric order, the Dealer is responsible for the cost of the fabric plus a handling charge that is equal to 10% of the fabric cost.

Dealer to Supply (DTS):

1. Select the fabric you wish to use and check the COM Search on maxonfurniture.com at: www.maxonfurniture.com/design- resources/textiles-and-finishes/com-search. Or call Maxon Customer Support to see if the fabric you have chosen has already been tested and approved on the product you are interested in.

You will need to have the COM supplier’s name, fabric pattern name, and color name for this inquiry.

2. If your fabric is not listed as approved, and it is not a Partnership fabric you may request a “Dealer to Supply” code. Select the

“Request COM Test” link on the COM Search website. Your name, company name and email will be prepopulated fields. The secondary email, project name, and bid/contract number are optional information. The supplier, pattern, and color will show a list by clicking in the box and entering the first letter of the name and these are free form text boxes. Once that information is entered click add. (Multiple series can be added to the same request if they are the same supplier, pattern, and color.) Then click submit.

3. An email will be sent to the to the requestor stating the COM Request was successfully submitted. Up to four emails could be received: Testing materials requested, in testing, and final approval/ denial with price grade and fabric code. It’s rare actual test yardage is required. Testing is mainly done by reviewing the attributes of the fabric. The testing process takes approximately 48 hours.

4. Make sure to use a “Dealer to Supply” COM code (e.g., S216426ZP) and place your order directly with Maxon Customer Support. 5. All “Dealer to Supply” orders will be charged Grade 4 pricing for

seating, and Grade D pricing for panels. Dealers will pay for the COM fabric separately.

6. All “Dealer to Supply” fabric must be sent on a fabric roll. Estimate the yardage required by using the yardage requirements listed in the price list by model. For questions please contact Maxon Customer Service.

7. Place your fabric order directly with the COM Supplier with instructions for the fabric to be sent on a fabric roll to: HNI Textile Distribution Center

COM Production Yardage — PO Number Docks 20-22

301 Mulberry Avenue Muscatine, IA 52761

Information that MUST be included in the packing slip attached to the fabric:

1. Dealer’s Purchase Order number to Maxon 2. Maxon’s Tracking number for the COM fabric 3. Dealer Name

4. Yards of Fabric

If the fabric shipment does not match the correct fabric and yardage, Maxon will notify the Dealer for resolution.

If Maxon receives fabric with incorrect labeling that cannot be linked to an Maxon furniture order, Maxon will hold the fabric for up to 7 days, while the COM Expeditor attempts to identify the order. After 7 days, Maxon will return the fabric to sender. There are no exceptions to this policy.

Any canceled orders are subject to cancellation charges up to the full value of the Maxon product canceled. Maxon will determine the actual cancellation charge at the time the cancellation is requested. 8. For additional details on “Dealer to Supply” fabric refer to your

Maxon terms and conditions.

(4)

Additional Policy Information:

The company assumes no responsibility for the overall appearance, flammability, normal durability, colorfastness, or any other quality standards. The Company reserves the right to reject a COM if the quality of the COM is not satisfactory for the product. Should this occur, the customer will be notified with an explanation within 7 working days of receipt of test materials.

The company is not responsible for fabric that has become obsolete at the COM supplier, that is of poor quality, or that is delivered late to the manufacturer from the COM supplier. Excess yardage will be disposed of at Maxon’s discretion.

All cancellations or changes to COM orders are subject to Company approval. Because of the nature of COM, special fabrics, finishes, and structural modifications, products ordered as specials and then canceled prior to shipment are subject to cancellation costs up to the full value of the product canceled. The company determines the actual cancellation charge at the time the cancellation is requested. Upon approval, a cancellation number is issued to the Customer.

Purchase orders will not be accepted or entered unless the testing process is complete with positive results.

If all testing has been previously completed, re-testing is only necessary if fabric is to be used on a different product, or pattern direction has changed from that previously approved.

Previous test results can be obtained by a customer on the COM Search on maxonfurniture.com or by calling Maxon Customer Support.

All COM fabric will be applied to seating and panel systems Pattern Cut unless Railroad Cut is requested and approved on the COM Test Request. Any fabrics approved as a width pass, the dealer is responsible for clarifying Railroad Cut on orders containing items that are too large to support the Pattern Cut of a fabric application (any items larger than 48" high or wide).

SEAT BACK RAILROADED

FOR SEATING: FOR PANELS: FOR TACKBOARDS AND TILES:

Railroaded Paern Cut Railroaded Paern Cut Railroaded Paern Cut UP PA^TTER

N CU^T UP RAILROADED UP

RAILROADED UP _PATTER^NCU^T SEA^T

BA^CK PA^{TTERN CU}

T

Fire Retardant

The Dealer is responsible for ensuring that the COM fabric is certified to meet all flame retardant requirements.

For more information, please contact Maxon Customer Support.

(5)

Adept Seating

Adept Standard Controls

Adjustable Arm Fixed Arm (F) Polished Arm (P) Armless (N)

Adept Synchro-Tilt

Adept Synchro-Tilt with Back Angle Adjust

Guest

Fixed Arm (F) Armless (N)

Cafe

Fixed Arm (F) Armless (N)

(6)

Elbows should be between 90º—135º

Torso/thigh should be between 90º—120º

Feet on floor or use foot rest Monitor and keyboard

should be centered in front of you Wrists flat and straight

15º

Arms and elbows close to the body

Armrest Height

Compressed ReferenceSeat Lumbar Height Backrest

Height

Overall Depth Overall Width

Measurements based on BIFMA G1-2013 guidelines. Many of the measurements are taken from the compressed seat (dotted horizontal line) and the tangent lumbar apex (dotted vertical line).

Armrest Depth

DepthSeat

Inward Pivot

Tangent Lumbar Apex

Reference Outward Pivot

Overall Height Min Seat

Width

SeatHeight AngleSeat

Seat-to-backrest Angle +

-

Seat Depth Armrest

Depth Width Between

Armrests BackrestMin

Width

(7)

MeTLSTORAGEMXitUPVERSÉPREPAREDeXTRINDEXEMERGEPREFIXREFERENCESMARTSPACESEATINGWORKSURFACESACCESSORIES ANSI — (American National Standards Institute) ANSI is a private,

non-profit organization (501(c)3) that administers and coordinates the U.S. voluntary standardization and conformity assessment system.

Asynchronous — High-performance seating control system with three levers to modify adjustments on the chair for a more customized fit:

∙ Angle of back relative to seat ∙ Tilt (free float or infinite locking) ∙ Forward tilt of seat

ASTM Standards — (American Society for Testing and Materials) is an international standards group that develops and publishes technical standards for may products, materials, and services. BIFMA — (Business and Institutional Furniture Manufacturer’s Association) Produces voluntary standards for manufacturers of office furnishings. These standards are intended to provide a common basis for the evaluation of safety, durability, dimensions, ergonomics, and the structural adequacy of the specified furniture. CAL TB117-2013 — Method used to test open flame resistance of components of upholstered furniture. This test is done with a lighted cigarette placed in crevices of mock-up components. CFC — (Chlorofluorocarbons) CFCs are broken down by strong ultraviolet light in the stratosphere and release chlorine atoms that then deplete the ozone layer. CFCs are commonly used as refrigerants, solvents, and foam blowing agents.

COL — (Customer’s Own Leather)

COM — (Customers Own Material) See pages 377-378. CTB133 — California Technical Bulletin (California Dept. of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation) Full-scale fire test for furniture manufactured for use in public buildings. Industry standard for full burn test.

Ergonomic — The coordination of the design of a product with the capacities and requirements of the user.

HFES — (Human Factors and Ergonomics Society) A membership- based organization whose mission is to promote the discovery and exchange of knowledge concerning the characteristics of human beings that are applicable to the design of systems and devices of all kinds.

Knee Tilt — A seating control that pivots about a point underneath the knee (towards the front of the seat) to reduce pressure on the back of the legs when reclining.

Memory Foam — Viscoelastic foam developed by NASA that retains the shape impressed upon it to reduce pressure points and distribute the load on the seat more evenly.

NFPA261 — Method of test for determining resistance of mock-up upholstered furniture material assemblies to ignition by a smoldering cigarette. This test is done with a lighted cigarette placed in crevices of mock-up components.

NFPA266 — Method of test for fire characteristics of upholstered furniture exposed to flaming ignition source. This is a full-scale test of mock up. Equivalent to CAL133.

Pneumatic — Operated by compressed air in a tool or machine. Powder Coat — Dry paint electrostatically charged for better adhesion to parts and baked on for a durable finish.

Recyclable — Able to be reclaimed and re-used into another value-added product.

Recycled — Made from post-industrial or post-consumer waste products.

Synchro-Tilt — A seating control where the chair back reclines at a prescribed ratio in relation to seat angle. Allows user to recline while keeping seat cushion relatively level to the floor.

Urethane — Synthetic plastic; any of a group of thermoplastic polymers that are used in resins, coatings, insulation, adhesives, foams, and fibers.

Weight-activated — A seating control that has the recline tension engineered into the chair so that the chair recline tension will automatically vary depending on the weight of the user reclining the chair.

Wyzenbeck Testing — Method of testing the abrasion resistance of a fabric utilizing a cotton duck or wire mesh that is rubbed, back and forth (a double rub), over the fabric.

(8)

Adept Product Features

∙ 60mm dual open wheel casters.

∙ Five Star Molded Engineered Nylon Base or Polished Aluminum for Stability.

∙ Pneumatic cylinder for easy height adjustment.

∙ Offers a Standard Control, Synchro Control or a Task Control to meet all office needs.

∙ Synchronous Tilt control includes side mounted tilt tension and multi-position tilt lock for maximum ergonomic comfort and adjustability.

∙ Construction - Molded engineered ergonomic plywood seat. ∙ Upholstered using foam that complies with CAL117.

∙ Seat - 3” Maximum Resiliency foam for maximum comfort.

∙ Back - Mesh back models feature a unique woven breathable mesh fabric creating a comfort back pocket and a floating lumbar support.

∙ Upholstered back models feature ergonomically contoured reflex core foam with fiber topper.

∙ Standard adjustable back on all models.

∙ Arms - Loop arms models feature a steel reinforced molded urethane that provides comfort and durability. Resilient arm surface protects arms and desk.

∙ 2D Adjustable Arm Models feature height and width adjustments.

∙ Fixed Polish Aluminum Arms with urethane arm pad. ∙ 4D Adjustable Arm Models feature height, width, depth and

pivot adjustments.

∙ Steel reinforced molded urethane arm caps provide comfort and durability. Resilient arm surface protects arms and desk. ∙ Meets or exceeds ANSI/BIFMA performance standard. ∙ Certified by SCS-IAQ-01880.

Adept Guest Chair Features

∙ Frame - Constructed of 1” diameter round 14 gauge steel tubing and ¾” diameter round 14 gauge steel tubing that provides lasting durability.

∙ Seat - Plastic injection molded seat support with 2⁷⁄⁸" polyurethane over molded foam for maximum comfort.

∙ Back - Plastic injection molded panel with ³⁄⁴" polyurethane over molded foam for maximum comfort.

∙ Mesh back models - feature a unique woven breathable mesh fabric creating a comfort back pocket and a floating lumbar support.

∙ Arms - Reinforced plastic injection molded arm support.

∙ Feet - Black nylon all surface glide or 38mm black open wheeled all surface casters.

∙ Upholstered using foam that complies with CAL117. ∙ Wall Saver Design.

∙ Armless Glide models stack up to 4 high on the floor. ∙ Meets or exceeds ANSI/BIFMA performance standards.

Adept Cafe Height Stool Features

∙ Frame - Constructed of 1" diameter round 14 gauge steel tubing and ³⁄⁴" diameter round 14 gauge steel tubing that provides lasting durability.

∙ Seat - Plastic injection molded seat support with 2⁷⁄⁸" polyurethane over molded foam for maximum comfort.

∙ Back - Plastic injection molded panel with ¾” polyurethane over molded foam for maximum comfort.

∙ Mesh back models - feature a unique woven breathable mesh fabric creating a comfort back pocket and a floating lumbar support.

∙ Arms - Reinforced plastic injection molded arm support.

∙ Feet - Black nylon all surface glide.

∙ Upholstered using foam that complies with CAL117. ∙ Wall Saver Design.

∙ All models meets or exceeds ANSI/BIFMA performance standards.

Adept Nesting Chair Features

∙ Frame - 7/8" x 1-1/4" 14-gauge oval tubing, 12-gauge 1" round tubing, 12-gauge 3/4" round tubing, 3/8" diameter steel wire

∙ Seat - Plastic injection molded, molded urethane foam cushion for maximum comfort.

∙ Mesh back - Plastic injection molded frame with a unique woven breathable mesh fabric

∙ Arms - Plastic injection molded arm support.

∙ Feet - Black hard casters.

∙ Upholstered using foam that complies with CAL117. ∙ Incremental nesting distance 6 3/4"

∙ Maximum stacking 4 high

∙ Meets or exceeds ANSI/BIFMA performance standards.

(9)

Adept Key Features

Feature M-SEMU501 M-SEMU502 M-SEMU503

Seat Height Adjustment B B B

Back Height Adjustment C C C

Swivel E E E

Seat slide D D

Tilt F

Synchro-Tilt G R

Tilt Tension J

Side Tilt Tension L L

Tilt Lock K K K

B C D E F

Pivot

B. Pneumatic seat height adjustment - Regulates height of chair relative to floor.

C. Back height adjustment -Positions lumbar support within a fixed range.

D. Seat glide mechanism - Seat cushion travels forward and back, then locks into position.

E. 360° Swivel F. Tilt - Pivot point located directly above center of chair base.

G

Pivot

J K L R

G. Synchro-tilt - Back reclines at a 2-to-1 ratio to seat angle. Allows user to recline while keeping seat cushion relatively level to floor.

J. Tilt tension - Controls rate and ease of recline.

K. Tilt lock - Locks out tilt function when chair is in upright position.

L. Side tilt tension - Controls rate and ease of recline. Conveniently located on the right side.

R. Back reclines at a 2 to 1 ratio to seat angle. Back angle adjusts independently of seat and can be locked in infinite number of positions within a fixed range.

(10)

Adept Specifications

Overall Upholstered

Back Mesh Back Lumbar Seat Armrests

Model

Number Height Width Depth Weight Rating Width Height Width Height Height Height from Floor Width Depth Height (Range from Floor) Adjustable Arms Width Fixed Arms Width M-SEMU501 44" 27" 35¹/2" 300 lbs 18¹/2" 21"-24" 19" 21¹/2"-24" - 17-21¹/2" 20" 17¹/8" 25" - 32¹/2" 17" - 19¹/2" 20" M-SEMU502 46¹/2" 27" 38" 300 lbs 18¹/2" 21"-24" 19" 21¹/2"-24" 6" - 9" 17¹/4" - 21³/4" 20" 16¹/4" - 18¹/4" 25" - 32³/4" 17" - 19¹/2" 20" M-SEMU503 44" 27" 39" 300 lbs 18¹/²" 21"-24" 19" 21¹/²"-24" - 17¹/⁴" - 21³/⁴" 20" 15¹/⁴" - 17¹/⁴" 25" - 32³/⁴" 17" - 19¹/²" 20" M-SEMU504 33¹/2" 25" 21³/4" 300 lbs 18¹/4" 18¹/8" 18¹/4" 18¹/8" - 18³/8" 18³/4" 17³/8" 26¹/4" - 21¹/2" M-SEMU505 46¹/2" 25" 23" 300 lbs 18¹/4" 18¹/8" 18¹/4" 18¹/8" - 31" 18³/4" 17³/8" 39" - 21¹/2" M-SEMU506 34" 26¹/2" 23¹/8" 300 lbs - - 19¹/2" 18³/8" - 19¹/4" 17³/8" 17" - - 24"

All measurements are per BIFMA procedures

(11)

See pages 376-384 for the specification guide.

Adept™ Standard Control

Description Model W D H SH AH Cubes Wt. ^{Grade 1}_Fabric ^{Grade 2}_Fabric

Adjustable Arm M-SEMU501 27.5" 26" 43.5" 17.5"-22" 25.5"-33" 11.3 48 1389 1454 2D (A)

4D (V)

Fixed Arm (F) 1289 1354

Polished Arm (P) 1489 1554

Armless (N) 1189 1254

HOW TO SPECIFY

Select Model Number Select Arm See pages 382-384 N Armless F Fixed Black A Height and Width V All Adjustable P Fixed Polished

Select Caster See pages 382-384 H Hard S Soft

Select Back See pages 382-384 U Upholstered M Mesh

Select Textile See page 376

Select Base See pages 382-384 SB Standard PA Polished

M -

_. _. _. _. _.

(12)

Adept™ Synchro-Tilt

4D (V)

Fixed Arm (F) 1514 1579

Armless (N) 1414 1479

HOW TO SPECIFY

M -

_. _. _. _. _.

(13)

Adept™ Synchro-Tilt with Back Angle Adjust

4D (V)

Fixed Arm (F) 1684 1749

Armless (N) 1584 1649

HOW TO SPECIFY

M -

_. _. _. _. _.

(14)

Adept™ Guest

Fixed Arm (F) M-SEMU504 25" 21.75" 33.5" 18.5" 7.5" 15.1 28 822 852

Armless (N) 777 807

Adept™ Ganging Bracket

Includes

∙ 24 Ganging Brackets.

Description Model Wt. Cubes List

Armless Glide Guest Chair Ganging Bracket M-SEMUGB 1 0.1 165

HOW TO SPECIFY

Select Model Number Select Arm See pages 382-384 N Armless F Fixed Black

Select Caster See pages 382-384 A All Surface E Glide

Select Base See pages 382-384 BLCK Textured Black PR8 Textured Silver

M -

_. _. _. _. _.

(15)

Adept™ Café

Fixed Arm (F) M-SEMU505 25" 23" 46.5" 31" 7.5" 21.8 37 1142 1172

Armless (N) 21.25" 23" 46.5" 31" 7.5" 21.8 37 1097 1127

HOW TO SPECIFY

Select Model Number Select Arm F Fixed Black

Select Caster H Hard Caster

Select Back SMH01 Black Mesh

Select Seat Upholstery See page 376

Select Base BLCK Textured Black

HOW TO SPECIFY

Select Model Number Select Arm See pages 382-384 N Armless F Fixed Black

Select Caster See pages 382-384 A All Surface E Glide

Select Back See pages 382-384 U Upholstered

Select Base See pages 382-384 BLCK Textured Black PR8 Textured Silver

M -

_. _. _. _. _.

Adept™ Nesting

Can stack up to 4 high M-SEMU506 26.75" 23.12" 34" 19.25" 26.75" 18.3 28 859 889

(16)

Mabi Seating COMING SOON

Mabi is a modern, light scale chair with intuitive functionality for unassigned and collaborative spaces throughout the office. It offers a weight-activated design that responds to your movements and doesn’t crowd your space.

∙ Intuitive functionality and design provides comfort and support without the need for multiple adjustments. ∙ Weight-activated control automatically adjusts to you as you sit.

∙ Thin profile provides a modern aesthetic, while a wide range of frame, mesh, and fabric choices ensures the perfect look within any space.

∙ 4-Way Stretch Mesh flexes in every direction to dynamically move with you. ∙ Fixed Arms.

∙ Available with a Task Cylinder.

∙ One-touch seat height adjustment easily moves the seat up and down. ∙ Choose from 2 frame options: Black and Titanium.

(17)

Mabi Seating COMING SOON

Mabi Task Chair, M-MABIT

Fixed Arm (F)

Mabi Finishes

Plastic

Color Code Mabi

Black-Kloeber T

_•

Mabi Finishes

Color Code

Black T

Titanium TI

Mabi Mesh

Color Code

Black IM

Titanium IT

Mabi Upholstery Options

Grade 1

Upholstery Code

Apex APX

Appoint Seating PNS Centurion Seating CU

Contourett UR

Inertia NR

Grade 2

Dotty DOT

Seed SED

Spin Seating SPNN

(18)

Mabi Product Features COMING SOON

∙ Intuitive functionality and design provides comfort and support without the need for multiple adjustments.

∙ Weight-activated control automatically adjusts to you as you sit.

∙ Thin profile provides a modern aesthetic, while a wide range of frame, mesh, and fabric choices ensures the perfect look within any space.

∙ 4-Way Stretch Mesh flexes in every direction to dynamically move with you.

∙ Fixed arms.

∙ Available with a task cylinder.

∙ One-touch seat height adjustment easily moves the seat up and down.

∙ Choose from 2 frame options: Black and Titanium.

Mabi

Features M-MABIT

Pneumatic Seat Height Adjustment A

360 Degree Swivel E

Synchro-Tilt J

Tilt Lock L

Weight-Activated Synchro-Tilt P

A E J

Pivot

A. Pneumatic seat height adjustment - Regulates height of chair relative to floor.

E. 360° Swivel J. Synchro-tilt - Back reclines at a 2-to-1 ratio to seat angle. Allows user to recline while keeping seat cushion relatively level to floor.

L P

Pivot

L. Tilt lock - Locks out

tilt function. P. Weight-activated synchro-tilt - Back reclines at a 2-to-1 ratio to seat angle. Tilt tension automatically adjusts to user's body weight as user reclines.

Mabi Specifications COMING SOON

Overall Mesh Back Seat

Model

Number Height Width Depth Width Height Height from Floor Width Depth

M-MABIT 41" 27" 27" 19¹/4" 21" 17" - 21" Task Cylinder 19¹/4" 17"

(19)

MeTLSTORAGEMXitUPVERSÉPREPAREDeXTRINDEXEMERGEPREFIXREFERENCESMARTSPACESEATINGWORKSURFACESACCESSORIES See pages 391-392 for the specification guide.

Mabi Mesh Task Chair COMING SOON

Description Model W D H SH Cubes Wt. ^{Grade 1}_Fabric ^{Grade 2}_Fabric

Fixed Arm (F) M-MABIT 27" 27" 41" 17"-21" 10.7 45 1364 1398

HOW TO SPECIFY

Select Model Number Select Control See page 392 .WO Weight Activated

Select Cylinder .TC2 Task Cylinder

Select Arm See page 392 F Fixed Black

Select Caster See page 392 S All-Surface Caster

Select Back Mesh See page 392 IM Black IT Titanium

M -

_.

W O

_.

T C 2

_.

F

_.

S

_. _.

Select Seat Fabric See page 391

Select Lumbar See page 392 NL No Lumbar

Select Base See page 392 SB Standard

Select Frame See page 392 T Black TI Titanium

.

^N ^L

.

^S ^B

.

(20)

MXMO Seating

From casual conference room to private office seating, Maxon offers a range of high quality, stylish options that feature ergonomic design and all day comfort. Adjustable arms, seat slides, lumbar support and upholstered or mesh backs are just a few of the comforts afforded by our chairs. Easily create a unified and cohesive look in your office with an array of upholstery options and comfort controls.

(21)

MXMO Upholstery Options

M-SEMX101 M-SEMO201 Grade 1 Upholstery Family

Apex

Centurion •

Contourett •

Inertia

Black Yidertex •

Grade 2 Upholstery Family Appoint Seating

Dotty •

Seed Spin Seating

MXMO COM Yardage

Back Option M-SEMX101 M-SEMO201

Mesh Back 1.0 1.0

MXMO Finishes

Plastic

Color Code MXMO Nesting Task

Black-Kloeber T

_• _•

MXMO Seating

MXMO Mesh Mid-Back-Task Chair M-SEMO201

Height-Adjustable Arm (H) Fixed Arm (F) Armless (N)

MXMO Mid-Back-Task Chair M-SEMX101

Height-Adjustable Arm (H) Fixed Arm (F) Armless (N)

(22)

MXMO Product Features

Casters - 50mm dual wheel hooded casters.

Base - Five Star Molded Engineered Nylon Base for Stability. Controls - Pneumatic cylinder for easy height adjustment.

Offers swivel tilt, tilt tension and tilt lock. Adjustable Lumbar for comfort.

Back - Mesh back feature plastic injection molded frame with mesh fabric.

Arms – Armless

Fixed Arm Black plastic injection molded

Height-Adjustable, steel and plastic injection molded, urethane arm pad and built in height adjustment Seat - ⁹/¹⁶" thick, composite wood product, 2¹/²" thick urethane

foam cushion.

Meets or exceeds ANSI/BIFMA performance standard

MXMO

Feature M-SEMX101 M-SEMO201

Seat Height Adjustment B B

Swivel E E

Tilt F F

Tilt Tension J J

Tilt Lock K K

B E F

Pivot

B. Pneumatic seat height adjustment - Regulates height of chair relative to floor.

E. 360° Swivel F. Tilt - Pivot point located directly above center of chair base.

J K

J. Tilt tension - Controls rate and ease of recline.

K. Tilt lock - Locks out tilt function when chair is in upright position.

MXMO Specifications

Overall Mesh Back Seat Armrests

Model

Number Height Width Depth ^WeightRating Width Height Height from

Floor Width Depth

Height (Range from

Floor) Width M-SEMX101 34” - 38¹/8” 26” 25” 250 lbs 17⁵/8" 19⁷/8" 15⁷/8" - 20" 18¹/2" 17¹/2" 25³/4" - 29⁷/8" 20¹/2" M-SEMO201 34” - 38¹/⁸” 26” 25” 250 lbs 17⁵/⁸" 19⁷/⁸" 15⁷/⁸" - 20" 18¹/²" 17¹/²" 25³/⁴" - 29⁷/⁸" 20¹/²" All measurements are per BIFMA procedures

(23)

Mesh Mid-Back-Task Chair

Fixed Arm (F) M-SEMO201 26" 25" 34" 15.875"-20" 25.75"-29.875" 35 3.4 694 722

Armless (N) 656 684

Height-Adjustable Arm (H) 705 733

HOW TO SPECIFY

Select Model Number Select Control See page 396 .Z1

Select Arm See page 396 N Armless F Fixed Black H Height-Adjustable

Select Caster See page 396 H Hard Caster

Select Back See page 396 M Mesh

M -

_. _. _. _. _.

Select Seat Fabric See page 395 M-SEMO201

Select Lumbar See page 396 AL Adjustable

Select Frame See page 396 T Black

. . .

(24)

Mesh Mid-Back-Task Chair

Includes

∙ Select Base Standard (SB) 2 boxes. ∙ Available in Black Yidertex

Description Model W D H SH AH Cubes Wt. List

Fixed Arm (F) M-SEMX101 26" 25" 34" 15.875"-20" 25.75"-29.875" 35 3.4 574

Armless (N) 536

Height-Adjustable Arm (H) 585

HOW TO SPECIFY

Select Model Number Select Control See page 396 .Z1

Select Arm See page 396 N Armless F Fixed Black H Height-Adjustable

Select Caster See page 396 H Hard Caster

Select Back See page 396 M Mesh

M -

_. _. _. _. _.

Select Seat Fabric See page 395 M-SEMX101

Black Fabric ACCF10 is the only available option.

Select Lumbar See page 396 AL Adjustable

Select Frame See page 396 T Black

. . .

(25)

Max4U Seating- Coming Soon

A Modern and simple design that provides comfort all day. A Chair designed for you.

(26)

Max4U Finishes

Plastic

Color Code Max4U

Black T

_•

M-M4UTMM Grade 1 Upholstery Family

Apex •

Centurion •

Contourett •

Inertia •

Grade 2 Upholstery Family

Appoint Seating •

Dotty •

Seed •

Spin Seating •

Back Option M-M4UTMM

Mesh Back 1.0

Max4U Upholstery Options

Max4U COM Yardage

(27)

Max4U Seating- COMING SOON

Max4U Mid-Back-Task Chair M-M4UTMM

Height & Width Adjustable Arm (A)

(28)

Max4U Product Features- COMING SOON

Casters - 50mm dual wheel hooded casters.

Base - Five Star Molded Engineered Nylon Base for Stability.

Controls-Pneumatic cylinder for easy height adjustment. Offers synchro-tilt and synchro tilt with seat slide.

Back - Mesh back feature plastic injection molded frame with mesh fabric. Arms - Height & Width Adjustable Arms

Seat - 3 thick foam cushion. Meets or exceeds ANSI/BIFMA performance standard

Feature M-M4UTMM

Pneumatic seat height adjustment A

Seat slide mechanism D

360 degree swivel E

Tilt F

Synchro-Tilt J

Tilt Tension K

Tilt Lock L

Integral Lumbar Support W

A. Pneumatic seat height adjustment- Regulates height of chair relative to floor.

D. Seat slide mechanism-Seat cushion travels forward and back, then locks into position.

E. 3600 Swivel F. Tilt- Pivot point located directly above center of chair base.

J. Synchro-tilt-Back reclines at a 2-to-1 ratio to seat angle. Allows usesr to recline while keeping seat cushion relatively level to floor.

K. Tilt tension- Controls rate and ease of recline.

L. Tilt Lock- Locks out

tilt function. W. Integral lumbar support-Easily adjusts to enhance comfort.

Max4U Product Features- COMING SOON

Overall Mesh Back Seat Armrests

Model

Number Height Width Depth ^WeightRating Width Height Height from

Floor Width Depth Adjustable

Arms Width Seat to Floor Height M-M4UTMM 40" 27" 27" 275 lbs 20" 24½" 15⁷/8" - 20" 27¾" 19" 25³/4" - 29⁷/8" 15¾ - 20"

All measurements are per BIFMA procedures

(29)

Max4U Mesh Mid-Back-Task Chair- COMING SOON

Description Model W D H SH AH Cubes Wt. List _Upholstery^{Grade 2}

Height & Width Adjustable (A) M-M4UTMM 27" 27" 40" 15¾"-20" 6.3 50 1000 1025

HOW TO SPECIFY

Select Model Number Select Control See page 402 Y0 Synchro Tilt Y1 Synchro Tilt w/Seat Slider

Select Arm See page 402 .A Height and Width Adjustable Arms

Select Caster See page 402 .H Hard Caster

Select Back See page 402 .FMB Black Mesh Back

M -

_. _. _. _. _.

Select Seat Fabric See page 400 ._ _ _ _ _

Select Base See page 402 .SB Standard Base

Select Frame See page 402 .T Black Frame

. .

(30)

Adept Seating. Seating GSA SIN 33721

Adept Seating

Adept Finishes

• •

•

•

Adept Upholstery Options

Adept COM Yardage

COM Program

Maxon to Supply (MTS):

Dealer to Supply (DTS):

Additional Policy Information:

Fire Retardant

Adept Seating

Adept Product Features

Adept Guest Chair Features

Adept Cafe Height Stool Features

Adept Nesting Chair Features

Adept Key Features

B C D E F

G

J K L R

Adept Specifications

Adept™ Standard Control

HOW TO SPECIFY

. . . . .

Adept™ Synchro-Tilt

HOW TO SPECIFY

. . . . .

Adept™ Synchro-Tilt with Back Angle Adjust

HOW TO SPECIFY

. . . . .

Adept™ Guest

Adept™ Ganging Bracket

Includes

HOW TO SPECIFY

. . . . .

Adept™ Café

HOW TO SPECIFY

HOW TO SPECIFY

. . . . .

Adept™ Nesting

Mabi Seating COMING SOON

Mabi Seating COMING SOON

Mabi Finishes

•

Mabi Upholstery Options

Mabi Product Features COMING SOON

Mabi

A E J

L P

Mabi Specifications COMING SOON

Mabi Mesh Task Chair COMING SOON

HOW TO SPECIFY

.

.

.

.

. .

.

.

.

MXMO Seating

MXMO Upholstery Options

MXMO COM Yardage

MXMO Finishes

• •

MXMO Seating

MXMO Product Features

MXMO

B E F

J K

MXMO Specifications

Mesh Mid-Back-Task Chair

HOW TO SPECIFY

. . . . .

. . .

Mesh Mid-Back-Task Chair

Includes

HOW TO SPECIFY

_• _•

_•

_•

_. _. _. _. _.

_. _. _. _. _.

_. _. _. _. _.

_. _. _. _. _.

_. _. _. _. _.

_•

_.

_.

_.

_.

_. _.

_• _•

_. _. _. _. _.

_. _. _. _. _.

_•

_. _. _. _. _.