• No results found

Modeling Su8 Based Micro Gripper with Constant Heat Flux and Stress Analysis

N/A
N/A
Protected

Academic year: 2020

Share "Modeling Su8 Based Micro Gripper with Constant Heat Flux and Stress Analysis"

Copied!
5
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

TABLE I.  DIMENSIONS OF THE GRIPPER STRUCTURE.
Figure 2.  Top layer of Arm structure before extrude
fig 5. Thermal expansion

References

Related documents

IJRAT paper format International Journal of Research in Advent Technology, Vol 6, No 12, December 2018 E ISSN 2321 9637 Available online at www ijrat org 3524 Double Diffusive Convection in

Paper Title (use style paper title) International Journal of Research in Advent Technology, Vol 6, No 9, September 2018 E ISSN 2321 9637 Available online at www ijrat org 2250

IJRAT paper format International Journal of Research in Advent Technology, Vol 6, Issue 8, August 2018 E ISSN 2321 9637 Available online at www ijrat org 2232 Design & Experimental

paper ID 43201632 International Journal of Research in Advent Technology, Vol 4, No 3, March 2016 E ISSN 2321 9637 Available online at www ijrat org 103 Modeling and Static Analysis

paper ID 14201311 E ISSN 2321?9637 Volume 1, Issue 4, November 2013 International Journal of Research in Advent Technology Available Online at http //www ijrat org 90 SEMICONDUCTOR

IJRAT Paper Template International Journal of Research in Advent Technology, Vol 7, No 6S, June 2019 E ISSN 2321 9637 Available online at www ijrat org 71 doi 10 32622/ijrat 76S201916

Paper Title (use style paper title) International Journal of Research in Advent Technology, Vol 7, No 5S, May 2019 E ISSN 2321 9637 Available online at www ijrat org 56 A Survey on

Paper Title (use style paper title) International Journal of Research in Advent Technology, Vol 7, No 5S, May 2019 E ISSN 2321 9637 Available online at www ijrat org 237 Outdoor And